| Message ID | 1490789773-21506-1-git-send-email-tn@semihalf.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 29.03.17 14:16:13, Tomasz Nowicki wrote: > Currently SoCs pass2.x do not emulate EA headers for ACPI boot method at all. > However, for pass2.x some devices (like EDAC) advertise incorrect base addresses > in their BARs which results in driver probe failure during resource request. > Since all problematic blocks are on 2nd NUMA node under domain 10 add necessary > quirk entry to obtain BAR addresses correction using EA header emulation. > > Fixes: 44f22bd91e88 ("PCI: Add MCFG quirks for Cavium ThunderX pass2.x host controller") > Signed-off-by: Tomasz Nowicki <tn@semihalf.com> > CC: stable@vger.kernel.org # v4.10+ Acked-by: Robert Richter <rrichter@cavium.com> Bjorn, please apply. Thanks, -Robert
On Wed, Mar 29, 2017 at 02:16:13PM +0200, Tomasz Nowicki wrote: > Currently SoCs pass2.x do not emulate EA headers for ACPI boot method at all. > However, for pass2.x some devices (like EDAC) advertise incorrect base addresses > in their BARs which results in driver probe failure during resource request. > Since all problematic blocks are on 2nd NUMA node under domain 10 add necessary > quirk entry to obtain BAR addresses correction using EA header emulation. > > Fixes: 44f22bd91e88 ("PCI: Add MCFG quirks for Cavium ThunderX pass2.x host controller") > Signed-off-by: Tomasz Nowicki <tn@semihalf.com> > CC: stable@vger.kernel.org # v4.10+ Sorry Tomasz, I must have mistakenly marked this "accepted" in patchwork, so it fell off my to-do list. It's too late to get this in v4.11, but I can still apply it for v4.12. I put it on my pci/host-thunder branch with Robert's ack. I added a preceding patch to tidy up whitespace, which makes this patch look like just: /* SoC pass2.x */ THUNDER_PEM_QUIRK(1, 0), THUNDER_PEM_QUIRK(1, 1), + THUNDER_ECAM_QUIRK(1, 10), Please double-check it to make sure this is what you need. > --- > drivers/acpi/pci_mcfg.c | 7 ++++--- > 1 file changed, 4 insertions(+), 3 deletions(-) > > diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c > index a6a4cea..a0a391e 100644 > --- a/drivers/acpi/pci_mcfg.c > +++ b/drivers/acpi/pci_mcfg.c > @@ -90,13 +90,14 @@ static struct mcfg_fixup mcfg_quirks[] = { > &thunder_pem_ecam_ops, THUNDER_PEM_RES(0x894057000000UL, node) }, \ > { "CAVIUM", "THUNDERX", rev, 9 + (10 * (node)), MCFG_BUS_ANY, \ > &thunder_pem_ecam_ops, THUNDER_PEM_RES(0x89808f000000UL, node) } > +#define THUNDER_ECAM_QUIRK(rev, seg) \ > + { "CAVIUM", "THUNDERX", rev, seg, MCFG_BUS_ANY, \ > + &pci_thunder_ecam_ops } > /* SoC pass2.x */ > THUNDER_PEM_QUIRK(1, 0), > THUNDER_PEM_QUIRK(1, 1), > + THUNDER_ECAM_QUIRK(1, 10), > > -#define THUNDER_ECAM_QUIRK(rev, seg) \ > - { "CAVIUM", "THUNDERX", rev, seg, MCFG_BUS_ANY, \ > - &pci_thunder_ecam_ops } > /* SoC pass1.x */ > THUNDER_PEM_QUIRK(2, 0), /* off-chip devices */ > THUNDER_PEM_QUIRK(2, 1), /* off-chip devices */ > -- > 2.7.4 >
On 21.04.2017 18:56, Bjorn Helgaas wrote: > On Wed, Mar 29, 2017 at 02:16:13PM +0200, Tomasz Nowicki wrote: >> Currently SoCs pass2.x do not emulate EA headers for ACPI boot method at all. >> However, for pass2.x some devices (like EDAC) advertise incorrect base addresses >> in their BARs which results in driver probe failure during resource request. >> Since all problematic blocks are on 2nd NUMA node under domain 10 add necessary >> quirk entry to obtain BAR addresses correction using EA header emulation. >> >> Fixes: 44f22bd91e88 ("PCI: Add MCFG quirks for Cavium ThunderX pass2.x host controller") >> Signed-off-by: Tomasz Nowicki <tn@semihalf.com> >> CC: stable@vger.kernel.org # v4.10+ > > Sorry Tomasz, I must have mistakenly marked this "accepted" in > patchwork, so it fell off my to-do list. It's too late to get this in > v4.11, but I can still apply it for v4.12. > > I put it on my pci/host-thunder branch with Robert's ack. I added a preceding > patch to tidy up whitespace, which makes this patch look like just: > > /* SoC pass2.x */ > THUNDER_PEM_QUIRK(1, 0), > THUNDER_PEM_QUIRK(1, 1), > + THUNDER_ECAM_QUIRK(1, 10), > > Please double-check it to make sure this is what you need. This is exactly what we need. Thank you Bjorn. Tomasz > >> --- >> drivers/acpi/pci_mcfg.c | 7 ++++--- >> 1 file changed, 4 insertions(+), 3 deletions(-) >> >> diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c >> index a6a4cea..a0a391e 100644 >> --- a/drivers/acpi/pci_mcfg.c >> +++ b/drivers/acpi/pci_mcfg.c >> @@ -90,13 +90,14 @@ static struct mcfg_fixup mcfg_quirks[] = { >> &thunder_pem_ecam_ops, THUNDER_PEM_RES(0x894057000000UL, node) }, \ >> { "CAVIUM", "THUNDERX", rev, 9 + (10 * (node)), MCFG_BUS_ANY, \ >> &thunder_pem_ecam_ops, THUNDER_PEM_RES(0x89808f000000UL, node) } >> +#define THUNDER_ECAM_QUIRK(rev, seg) \ >> + { "CAVIUM", "THUNDERX", rev, seg, MCFG_BUS_ANY, \ >> + &pci_thunder_ecam_ops } >> /* SoC pass2.x */ >> THUNDER_PEM_QUIRK(1, 0), >> THUNDER_PEM_QUIRK(1, 1), >> + THUNDER_ECAM_QUIRK(1, 10), >> >> -#define THUNDER_ECAM_QUIRK(rev, seg) \ >> - { "CAVIUM", "THUNDERX", rev, seg, MCFG_BUS_ANY, \ >> - &pci_thunder_ecam_ops } >> /* SoC pass1.x */ >> THUNDER_PEM_QUIRK(2, 0), /* off-chip devices */ >> THUNDER_PEM_QUIRK(2, 1), /* off-chip devices */ >> -- >> 2.7.4 >>
On 21.04.17 11:56:14, Bjorn Helgaas wrote: > On Wed, Mar 29, 2017 at 02:16:13PM +0200, Tomasz Nowicki wrote: > > Currently SoCs pass2.x do not emulate EA headers for ACPI boot method at all. > > However, for pass2.x some devices (like EDAC) advertise incorrect base addresses > > in their BARs which results in driver probe failure during resource request. > > Since all problematic blocks are on 2nd NUMA node under domain 10 add necessary > > quirk entry to obtain BAR addresses correction using EA header emulation. > > > > Fixes: 44f22bd91e88 ("PCI: Add MCFG quirks for Cavium ThunderX pass2.x host controller") > > Signed-off-by: Tomasz Nowicki <tn@semihalf.com> > > CC: stable@vger.kernel.org # v4.10+ > > Sorry Tomasz, I must have mistakenly marked this "accepted" in > patchwork, so it fell off my to-do list. It's too late to get this in > v4.11, but I can still apply it for v4.12. > > I put it on my pci/host-thunder branch with Robert's ack. I added a preceding > patch to tidy up whitespace, which makes this patch look like just: > > /* SoC pass2.x */ > THUNDER_PEM_QUIRK(1, 0), > THUNDER_PEM_QUIRK(1, 1), > + THUNDER_ECAM_QUIRK(1, 10), > > Please double-check it to make sure this is what you need. Bjorn, since the second is marked stable there will be conflicts when applying it to stable (or built errors). The best would be to change order of both (128cd6e8249f^, 128cd6e8249f) for smooth backporting which makes it then more close to Tomasz's version again. Thanks, -Robert > > > --- > > drivers/acpi/pci_mcfg.c | 7 ++++--- > > 1 file changed, 4 insertions(+), 3 deletions(-) > > > > diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c > > index a6a4cea..a0a391e 100644 > > --- a/drivers/acpi/pci_mcfg.c > > +++ b/drivers/acpi/pci_mcfg.c > > @@ -90,13 +90,14 @@ static struct mcfg_fixup mcfg_quirks[] = { > > &thunder_pem_ecam_ops, THUNDER_PEM_RES(0x894057000000UL, node) }, \ > > { "CAVIUM", "THUNDERX", rev, 9 + (10 * (node)), MCFG_BUS_ANY, \ > > &thunder_pem_ecam_ops, THUNDER_PEM_RES(0x89808f000000UL, node) } > > +#define THUNDER_ECAM_QUIRK(rev, seg) \ > > + { "CAVIUM", "THUNDERX", rev, seg, MCFG_BUS_ANY, \ > > + &pci_thunder_ecam_ops } > > /* SoC pass2.x */ > > THUNDER_PEM_QUIRK(1, 0), > > THUNDER_PEM_QUIRK(1, 1), > > + THUNDER_ECAM_QUIRK(1, 10), > > > > -#define THUNDER_ECAM_QUIRK(rev, seg) \ > > - { "CAVIUM", "THUNDERX", rev, seg, MCFG_BUS_ANY, \ > > - &pci_thunder_ecam_ops } > > /* SoC pass1.x */ > > THUNDER_PEM_QUIRK(2, 0), /* off-chip devices */ > > THUNDER_PEM_QUIRK(2, 1), /* off-chip devices */ > > -- > > 2.7.4 > >
On Mon, Apr 24, 2017 at 4:34 AM, Robert Richter <robert.richter@cavium.com> wrote: > On 21.04.17 11:56:14, Bjorn Helgaas wrote: >> On Wed, Mar 29, 2017 at 02:16:13PM +0200, Tomasz Nowicki wrote: >> > Currently SoCs pass2.x do not emulate EA headers for ACPI boot method at all. >> > However, for pass2.x some devices (like EDAC) advertise incorrect base addresses >> > in their BARs which results in driver probe failure during resource request. >> > Since all problematic blocks are on 2nd NUMA node under domain 10 add necessary >> > quirk entry to obtain BAR addresses correction using EA header emulation. >> > >> > Fixes: 44f22bd91e88 ("PCI: Add MCFG quirks for Cavium ThunderX pass2.x host controller") >> > Signed-off-by: Tomasz Nowicki <tn@semihalf.com> >> > CC: stable@vger.kernel.org # v4.10+ >> >> Sorry Tomasz, I must have mistakenly marked this "accepted" in >> patchwork, so it fell off my to-do list. It's too late to get this in >> v4.11, but I can still apply it for v4.12. >> >> I put it on my pci/host-thunder branch with Robert's ack. I added a preceding >> patch to tidy up whitespace, which makes this patch look like just: >> >> /* SoC pass2.x */ >> THUNDER_PEM_QUIRK(1, 0), >> THUNDER_PEM_QUIRK(1, 1), >> + THUNDER_ECAM_QUIRK(1, 10), >> >> Please double-check it to make sure this is what you need. > > Bjorn, > > since the second is marked stable there will be conflicts when > applying it to stable (or built errors). The best would be to change > order of both (128cd6e8249f^, 128cd6e8249f) for smooth backporting > which makes it then more close to Tomasz's version again. Thanks, I should have noticed that. Could go either way; I just marked 128cd6e8249f^ for stable as well, since it seemed marginally easier to read to split the whitespace changes from the real change. >> > --- >> > drivers/acpi/pci_mcfg.c | 7 ++++--- >> > 1 file changed, 4 insertions(+), 3 deletions(-) >> > >> > diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c >> > index a6a4cea..a0a391e 100644 >> > --- a/drivers/acpi/pci_mcfg.c >> > +++ b/drivers/acpi/pci_mcfg.c >> > @@ -90,13 +90,14 @@ static struct mcfg_fixup mcfg_quirks[] = { >> > &thunder_pem_ecam_ops, THUNDER_PEM_RES(0x894057000000UL, node) }, \ >> > { "CAVIUM", "THUNDERX", rev, 9 + (10 * (node)), MCFG_BUS_ANY, \ >> > &thunder_pem_ecam_ops, THUNDER_PEM_RES(0x89808f000000UL, node) } >> > +#define THUNDER_ECAM_QUIRK(rev, seg) \ >> > + { "CAVIUM", "THUNDERX", rev, seg, MCFG_BUS_ANY, \ >> > + &pci_thunder_ecam_ops } >> > /* SoC pass2.x */ >> > THUNDER_PEM_QUIRK(1, 0), >> > THUNDER_PEM_QUIRK(1, 1), >> > + THUNDER_ECAM_QUIRK(1, 10), >> > >> > -#define THUNDER_ECAM_QUIRK(rev, seg) \ >> > - { "CAVIUM", "THUNDERX", rev, seg, MCFG_BUS_ANY, \ >> > - &pci_thunder_ecam_ops } >> > /* SoC pass1.x */ >> > THUNDER_PEM_QUIRK(2, 0), /* off-chip devices */ >> > THUNDER_PEM_QUIRK(2, 1), /* off-chip devices */ >> > -- >> > 2.7.4 >> > > -- > To unsubscribe from this list: send the line "unsubscribe linux-acpi" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c index a6a4cea..a0a391e 100644 --- a/drivers/acpi/pci_mcfg.c +++ b/drivers/acpi/pci_mcfg.c @@ -90,13 +90,14 @@ static struct mcfg_fixup mcfg_quirks[] = { &thunder_pem_ecam_ops, THUNDER_PEM_RES(0x894057000000UL, node) }, \ { "CAVIUM", "THUNDERX", rev, 9 + (10 * (node)), MCFG_BUS_ANY, \ &thunder_pem_ecam_ops, THUNDER_PEM_RES(0x89808f000000UL, node) } +#define THUNDER_ECAM_QUIRK(rev, seg) \ + { "CAVIUM", "THUNDERX", rev, seg, MCFG_BUS_ANY, \ + &pci_thunder_ecam_ops } /* SoC pass2.x */ THUNDER_PEM_QUIRK(1, 0), THUNDER_PEM_QUIRK(1, 1), + THUNDER_ECAM_QUIRK(1, 10), -#define THUNDER_ECAM_QUIRK(rev, seg) \ - { "CAVIUM", "THUNDERX", rev, seg, MCFG_BUS_ANY, \ - &pci_thunder_ecam_ops } /* SoC pass1.x */ THUNDER_PEM_QUIRK(2, 0), /* off-chip devices */ THUNDER_PEM_QUIRK(2, 1), /* off-chip devices */
Currently SoCs pass2.x do not emulate EA headers for ACPI boot method at all. However, for pass2.x some devices (like EDAC) advertise incorrect base addresses in their BARs which results in driver probe failure during resource request. Since all problematic blocks are on 2nd NUMA node under domain 10 add necessary quirk entry to obtain BAR addresses correction using EA header emulation. Fixes: 44f22bd91e88 ("PCI: Add MCFG quirks for Cavium ThunderX pass2.x host controller") Signed-off-by: Tomasz Nowicki <tn@semihalf.com> CC: stable@vger.kernel.org # v4.10+ --- drivers/acpi/pci_mcfg.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)