@@ -555,6 +555,8 @@
gpioa: gpio@40020000 {
gpio-controller;
#gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x0 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOA)>;
st,bank-name = "GPIOA";
@@ -563,6 +565,8 @@
gpiob: gpio@40020400 {
gpio-controller;
#gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x400 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOB)>;
st,bank-name = "GPIOB";
@@ -571,6 +575,8 @@
gpioc: gpio@40020800 {
gpio-controller;
#gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x800 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOC)>;
st,bank-name = "GPIOC";
@@ -579,6 +585,8 @@
gpiod: gpio@40020c00 {
gpio-controller;
#gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0xc00 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOD)>;
st,bank-name = "GPIOD";
@@ -587,6 +595,8 @@
gpioe: gpio@40021000 {
gpio-controller;
#gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x1000 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOE)>;
st,bank-name = "GPIOE";
@@ -595,6 +605,8 @@
gpiof: gpio@40021400 {
gpio-controller;
#gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x1400 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOF)>;
st,bank-name = "GPIOF";
@@ -603,6 +615,8 @@
gpiog: gpio@40021800 {
gpio-controller;
#gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x1800 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOG)>;
st,bank-name = "GPIOG";
@@ -611,6 +625,8 @@
gpioh: gpio@40021c00 {
gpio-controller;
#gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x1c00 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOH)>;
st,bank-name = "GPIOH";
@@ -619,6 +635,8 @@
gpioi: gpio@40022000 {
gpio-controller;
#gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x2000 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOI)>;
st,bank-name = "GPIOI";
@@ -627,6 +645,8 @@
gpioj: gpio@40022400 {
gpio-controller;
#gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x2400 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOJ)>;
st,bank-name = "GPIOJ";
@@ -635,6 +655,8 @@
gpiok: gpio@40022800 {
gpio-controller;
#gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x2800 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOK)>;
st,bank-name = "GPIOK";
@@ -190,6 +190,8 @@
gpioa: gpio@40020000 {
gpio-controller;
#gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x0 0x400>;
clocks = <&rcc 0 256>;
st,bank-name = "GPIOA";
@@ -198,6 +200,8 @@
gpiob: gpio@40020400 {
gpio-controller;
#gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x400 0x400>;
clocks = <&rcc 0 257>;
st,bank-name = "GPIOB";
@@ -206,6 +210,8 @@
gpioc: gpio@40020800 {
gpio-controller;
#gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x800 0x400>;
clocks = <&rcc 0 258>;
st,bank-name = "GPIOC";
@@ -214,6 +220,8 @@
gpiod: gpio@40020c00 {
gpio-controller;
#gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0xc00 0x400>;
clocks = <&rcc 0 259>;
st,bank-name = "GPIOD";
@@ -222,6 +230,8 @@
gpioe: gpio@40021000 {
gpio-controller;
#gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x1000 0x400>;
clocks = <&rcc 0 260>;
st,bank-name = "GPIOE";
@@ -230,6 +240,8 @@
gpiof: gpio@40021400 {
gpio-controller;
#gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x1400 0x400>;
clocks = <&rcc 0 261>;
st,bank-name = "GPIOF";
@@ -238,6 +250,8 @@
gpiog: gpio@40021800 {
gpio-controller;
#gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x1800 0x400>;
clocks = <&rcc 0 262>;
st,bank-name = "GPIOG";
@@ -246,6 +260,8 @@
gpioh: gpio@40021c00 {
gpio-controller;
#gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x1c00 0x400>;
clocks = <&rcc 0 263>;
st,bank-name = "GPIOH";
@@ -254,6 +270,8 @@
gpioi: gpio@40022000 {
gpio-controller;
#gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x2000 0x400>;
clocks = <&rcc 0 264>;
st,bank-name = "GPIOI";
@@ -262,6 +280,8 @@
gpioj: gpio@40022400 {
gpio-controller;
#gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x2400 0x400>;
clocks = <&rcc 0 265>;
st,bank-name = "GPIOJ";
@@ -270,6 +290,8 @@
gpiok: gpio@40022800 {
gpio-controller;
#gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x2800 0x400>;
clocks = <&rcc 0 266>;
st,bank-name = "GPIOK";
This patch set each gpio controller as a interrupt controller. User who wants to use gpio as interrupt will have choice to use either "gpiolib" interface or "common" interrupt interface. Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>