| Message ID | 1493373403-23462-5-git-send-email-varada@codeaurora.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 04/28, Varadarajan Narayanan wrote: > diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts > new file mode 100644 > index 0000000..c150bea > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts > @@ -0,0 +1,48 @@ > +/dts-v1/; > +/* Copyright (c) 2017, The Linux Foundation. All rights reserved. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 and > + * only version 2 as published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + */ > +#include "ipq8074.dtsi" > + > +/ { > + #address-cells = <0x2>; > + #size-cells = <0x2>; > + model = "Qualcomm Technologies, Inc. IPQ8074-HK01"; > + compatible = "qcom,ipq8074-hk01", "qcom,ipq8074"; > + interrupt-parent = <&intc>; > + > + chosen { > + bootargs = "console=ttyMSM0,115200,n8 root=/dev/ram0 rw init=/init"; Add an aliases node for serial0 and use a chosen node with stdout-path = "serial0" instead please. > + }; > + > + memory { > + device_type = "memory"; > + reg = <0x0 0x40000000 0x0 0x20000000>; > + }; > + > + soc: soc { Do you need the soc label here? Please remove. > + pinctrl@1000000 { > + serial_4_pins: serial4_pinmux { > + mux { > + pins = "gpio23", "gpio24"; > + function = "blsp4_uart1"; > + bias-disable; > + }; > + }; > + }; > + > + serial@78b3000 { > + pinctrl-0 = <&serial_4_pins>; > + pinctrl-names = "default"; > + status = "ok"; > + }; > + }; > +}; > diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi > new file mode 100644 > index 0000000..f910cc0 > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi > @@ -0,0 +1,153 @@ > +/* > + * Copyright (c) 2017, The Linux Foundation. All rights reserved. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 and > + * only version 2 as published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + */ > + > +#include <dt-bindings/interrupt-controller/arm-gic.h> > +#include <dt-bindings/clock/qcom,gcc-ipq8074.h> > + > +/ { > + model = "Qualcomm Technologies, Inc. IPQ8074"; > + compatible = "qcom,ipq8074"; > + > + soc: soc { > + #address-cells = <0x1>; > + #size-cells = <0x1>; > + ranges = <0 0 0 0xffffffff>; > + compatible = "simple-bus"; > + > + pinctrl@1000000 { > + compatible = "qcom,ipq8074-pinctrl"; > + reg = <0x1000000 0x300000>; > + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; > + gpio-controller; > + #gpio-cells = <0x2>; > + interrupt-controller; > + #interrupt-cells = <0x2>; > + }; > + > + intc: interrupt-controller@b000000 { > + compatible = "qcom,msm-qgic2"; > + interrupt-controller; > + #interrupt-cells = <0x3>; > + reg = <0xb000000 0x1000>, > + <0xb002000 0x1000>; Please align this up with previous reg property. > + }; > + > + timer { > + compatible = "arm,armv8-timer"; > + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, > + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, > + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, > + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; > + }; Is there an mmio timer as well? We should add it too. > + > + gcc: gcc@1800000 { > + compatible = "qcom,gcc-ipq8074"; > + reg = <0x1800000 0x80000>; Wow that is a huge area! Is it really that large? > + #clock-cells = <0x1>; > + #reset-cells = <0x1>; > + }; > + > + serial@78b3000 { > + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; > + reg = <0x78b3000 0x200>; > + interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>, > + <&gcc GCC_BLSP1_AHB_CLK>; > + clock-names = "core", "iface"; > + status = "disabled"; > + }; > + }; > + > + cpus { > + #address-cells = <0x1>; > + #size-cells = <0x0>; > + > + cpu-map { > + > + cluster0 { > + > + core0 { > + cpu = <&CPU0>; > + }; > + > + core1 { > + cpu = <&CPU1>; > + }; > + > + core2 { > + cpu = <&CPU2>; > + }; > + > + core3 { > + cpu = <&CPU3>; > + }; > + }; > + }; Is this needed? Looks ok, but just curious if we need to do it for other arm64 platforms we support. > + > + CPU0: cpu@0 { > + device_type = "cpu"; > + compatible = "arm,cortex-a53", "arm,armv8"; > + reg = <0x0>; > + next-level-cache = <&L2_0>; > + enable-method = "psci"; > + }; > + > + CPU1: cpu@1 { > + device_type = "cpu"; > + compatible = "arm,cortex-a53", "arm,armv8"; > + enable-method = "psci"; > + reg = <0x1>; > + next-level-cache = <&L2_0>; > + }; > + > + CPU2: cpu@2 { > + device_type = "cpu"; > + compatible = "arm,cortex-a53", "arm,armv8"; > + enable-method = "psci"; > + reg = <0x2>; > + next-level-cache = <&L2_0>; > + }; > + > + CPU3: cpu@3 { > + device_type = "cpu"; > + compatible = "arm,cortex-a53", "arm,armv8"; > + enable-method = "psci"; > + reg = <0x3>; > + next-level-cache = <&L2_0>; > + }; > + > + L2_0: l2-cache { > + compatible = "cache"; > + cache-level = <0x2>; > + }; This should be inside some CPU? CPU0? > + }; We should be able to add the performance monitor node too? > + > + psci { > + compatible = "arm,psci-1.0"; > + method = "smc"; > + }; > + > + clocks { > + sleep_clk: sleep_clk { > + compatible = "fixed-clock"; > + clock-frequency = <32000>; Not 32765 or 32768? > + #clock-cells = <0>; > + }; > + > + xo: xo { > + compatible = "fixed-clock"; > + clock-frequency = <19200000>; > + #clock-cells = <0>; > + }; > + };
Hi, On Fri, Apr 28, 2017 at 03:26:42PM +0530, Varadarajan Narayanan wrote: > Subject: [PATCH 4/5] arm64: dts: Add ipq8074 SoC and MTP board support s/MTP/HK01/ ? > Add initial device tree support for the Qualcomm IPQ8074 SoC and > HK01 evaluation board. > > Signed-off-by: Manoharan Vijaya Raghavan <mraghava@codeaurora.org> > Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> > Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> > --- > arch/arm64/boot/dts/qcom/Makefile | 1 + > arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 48 ++++++++++ > arch/arm64/boot/dts/qcom/ipq8074.dtsi | 153 ++++++++++++++++++++++++++++++ > 3 files changed, 202 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/ipq8074-hk01.dts > create mode 100644 arch/arm64/boot/dts/qcom/ipq8074.dtsi > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index cc0f02d..7c6963e 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -4,6 +4,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8994-angler-rev-101.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb > +dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb Maybe this list should be alphabetically sorted ('i' before 'm'). (I have no strong preference) Thanks, Jonathan Neuschäfer
On 4/29/2017 12:23 AM, Stephen Boyd wrote: > On 04/28, Varadarajan Narayanan wrote: >> diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts >> new file mode 100644 >> index 0000000..c150bea >> --- /dev/null >> +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts >> @@ -0,0 +1,48 @@ >> +/dts-v1/; >> +/* Copyright (c) 2017, The Linux Foundation. All rights reserved. >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License version 2 and >> + * only version 2 as published by the Free Software Foundation. >> + * >> + * This program is distributed in the hope that it will be useful, >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + */ >> +#include "ipq8074.dtsi" >> + >> +/ { >> + #address-cells = <0x2>; >> + #size-cells = <0x2>; >> + model = "Qualcomm Technologies, Inc. IPQ8074-HK01"; >> + compatible = "qcom,ipq8074-hk01", "qcom,ipq8074"; >> + interrupt-parent = <&intc>; >> + >> + chosen { >> + bootargs = "console=ttyMSM0,115200,n8 root=/dev/ram0 rw init=/init"; > > Add an aliases node for serial0 and use a chosen node with stdout-path = "serial0" instead please. Ok > >> + }; >> + >> + memory { >> + device_type = "memory"; >> + reg = <0x0 0x40000000 0x0 0x20000000>; >> + }; >> + >> + soc: soc { > > Do you need the soc label here? Please remove. Ok > >> + pinctrl@1000000 { >> + serial_4_pins: serial4_pinmux { >> + mux { >> + pins = "gpio23", "gpio24"; >> + function = "blsp4_uart1"; >> + bias-disable; >> + }; >> + }; >> + }; >> + >> + serial@78b3000 { >> + pinctrl-0 = <&serial_4_pins>; >> + pinctrl-names = "default"; >> + status = "ok"; >> + }; >> + }; >> +}; >> diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi >> new file mode 100644 >> index 0000000..f910cc0 >> --- /dev/null >> +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi >> @@ -0,0 +1,153 @@ >> +/* >> + * Copyright (c) 2017, The Linux Foundation. All rights reserved. >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License version 2 and >> + * only version 2 as published by the Free Software Foundation. >> + * >> + * This program is distributed in the hope that it will be useful, >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + */ >> + >> +#include <dt-bindings/interrupt-controller/arm-gic.h> >> +#include <dt-bindings/clock/qcom,gcc-ipq8074.h> >> + >> +/ { >> + model = "Qualcomm Technologies, Inc. IPQ8074"; >> + compatible = "qcom,ipq8074"; >> + >> + soc: soc { >> + #address-cells = <0x1>; >> + #size-cells = <0x1>; >> + ranges = <0 0 0 0xffffffff>; >> + compatible = "simple-bus"; >> + >> + pinctrl@1000000 { >> + compatible = "qcom,ipq8074-pinctrl"; >> + reg = <0x1000000 0x300000>; >> + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; >> + gpio-controller; >> + #gpio-cells = <0x2>; >> + interrupt-controller; >> + #interrupt-cells = <0x2>; >> + }; >> + >> + intc: interrupt-controller@b000000 { >> + compatible = "qcom,msm-qgic2"; >> + interrupt-controller; >> + #interrupt-cells = <0x3>; >> + reg = <0xb000000 0x1000>, >> + <0xb002000 0x1000>; > > Please align this up with previous reg property. Ok > >> + }; >> + >> + timer { >> + compatible = "arm,armv8-timer"; >> + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, >> + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, >> + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, >> + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; >> + }; > > Is there an mmio timer as well? We should add it too. Ok > >> + >> + gcc: gcc@1800000 { >> + compatible = "qcom,gcc-ipq8074"; >> + reg = <0x1800000 0x80000>; > > Wow that is a huge area! Is it really that large? Yes, per the memory map this region is 512K. > >> + #clock-cells = <0x1>; >> + #reset-cells = <0x1>; >> + }; >> + >> + serial@78b3000 { >> + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; >> + reg = <0x78b3000 0x200>; >> + interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>; >> + clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>, >> + <&gcc GCC_BLSP1_AHB_CLK>; >> + clock-names = "core", "iface"; >> + status = "disabled"; >> + }; >> + }; >> + >> + cpus { >> + #address-cells = <0x1>; >> + #size-cells = <0x0>; >> + >> + cpu-map { >> + >> + cluster0 { >> + >> + core0 { >> + cpu = <&CPU0>; >> + }; >> + >> + core1 { >> + cpu = <&CPU1>; >> + }; >> + >> + core2 { >> + cpu = <&CPU2>; >> + }; >> + >> + core3 { >> + cpu = <&CPU3>; >> + }; >> + }; >> + }; > > Is this needed? Looks ok, but just curious if we need to do it > for other arm64 platforms we support. Don't see the need for topology at this time, will add it later if needed. > >> + >> + CPU0: cpu@0 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a53", "arm,armv8"; >> + reg = <0x0>; >> + next-level-cache = <&L2_0>; >> + enable-method = "psci"; >> + }; >> + >> + CPU1: cpu@1 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a53", "arm,armv8"; >> + enable-method = "psci"; >> + reg = <0x1>; >> + next-level-cache = <&L2_0>; >> + }; >> + >> + CPU2: cpu@2 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a53", "arm,armv8"; >> + enable-method = "psci"; >> + reg = <0x2>; >> + next-level-cache = <&L2_0>; >> + }; >> + >> + CPU3: cpu@3 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a53", "arm,armv8"; >> + enable-method = "psci"; >> + reg = <0x3>; >> + next-level-cache = <&L2_0>; >> + }; >> + >> + L2_0: l2-cache { >> + compatible = "cache"; >> + cache-level = <0x2>; >> + }; > > This should be inside some CPU? CPU0? There is only one L2. We followed the same convention as in msm8916.dtsi. > >> + }; > > We should be able to add the performance monitor node too? > Ok >> + >> + psci { >> + compatible = "arm,psci-1.0"; >> + method = "smc"; >> + }; >> + >> + clocks { >> + sleep_clk: sleep_clk { >> + compatible = "fixed-clock"; >> + clock-frequency = <32000>; > > Not 32765 or 32768? It is 32000. > >> + #clock-cells = <0>; >> + }; >> + >> + xo: xo { >> + compatible = "fixed-clock"; >> + clock-frequency = <19200000>; >> + #clock-cells = <0>; >> + }; >> + }; > -Varada
On 4/29/2017 12:28 AM, Jonathan Neuschäfer wrote: > Hi, > > On Fri, Apr 28, 2017 at 03:26:42PM +0530, Varadarajan Narayanan wrote: >> Subject: [PATCH 4/5] arm64: dts: Add ipq8074 SoC and MTP board support > > s/MTP/HK01/ ? Have posted v2 with MTP changed as HK01. Please refer to https://www.spinics.net/lists/arm-kernel/msg579470.html. Thanks Varada > >> Add initial device tree support for the Qualcomm IPQ8074 SoC and >> HK01 evaluation board. >> >> Signed-off-by: Manoharan Vijaya Raghavan <mraghava@codeaurora.org> >> Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> >> Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> >> --- >> arch/arm64/boot/dts/qcom/Makefile | 1 + >> arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 48 ++++++++++ >> arch/arm64/boot/dts/qcom/ipq8074.dtsi | 153 ++++++++++++++++++++++++++++++ >> 3 files changed, 202 insertions(+) >> create mode 100644 arch/arm64/boot/dts/qcom/ipq8074-hk01.dts >> create mode 100644 arch/arm64/boot/dts/qcom/ipq8074.dtsi >> >> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile >> index cc0f02d..7c6963e 100644 >> --- a/arch/arm64/boot/dts/qcom/Makefile >> +++ b/arch/arm64/boot/dts/qcom/Makefile >> @@ -4,6 +4,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb >> dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb >> dtb-$(CONFIG_ARCH_QCOM) += msm8994-angler-rev-101.dtb >> dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb >> +dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb > > Maybe this list should be alphabetically sorted ('i' before 'm'). > (I have no strong preference) > > > Thanks, > Jonathan Neuschäfer >
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index cc0f02d..7c6963e 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -4,6 +4,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8994-angler-rev-101.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb always := $(dtb-y) subdir-y := $(dts-dirs) diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts new file mode 100644 index 0000000..c150bea --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts @@ -0,0 +1,48 @@ +/dts-v1/; +/* Copyright (c) 2017, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include "ipq8074.dtsi" + +/ { + #address-cells = <0x2>; + #size-cells = <0x2>; + model = "Qualcomm Technologies, Inc. IPQ8074-HK01"; + compatible = "qcom,ipq8074-hk01", "qcom,ipq8074"; + interrupt-parent = <&intc>; + + chosen { + bootargs = "console=ttyMSM0,115200,n8 root=/dev/ram0 rw init=/init"; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x40000000 0x0 0x20000000>; + }; + + soc: soc { + pinctrl@1000000 { + serial_4_pins: serial4_pinmux { + mux { + pins = "gpio23", "gpio24"; + function = "blsp4_uart1"; + bias-disable; + }; + }; + }; + + serial@78b3000 { + pinctrl-0 = <&serial_4_pins>; + pinctrl-names = "default"; + status = "ok"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi new file mode 100644 index 0000000..f910cc0 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -0,0 +1,153 @@ +/* + * Copyright (c) 2017, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,gcc-ipq8074.h> + +/ { + model = "Qualcomm Technologies, Inc. IPQ8074"; + compatible = "qcom,ipq8074"; + + soc: soc { + #address-cells = <0x1>; + #size-cells = <0x1>; + ranges = <0 0 0 0xffffffff>; + compatible = "simple-bus"; + + pinctrl@1000000 { + compatible = "qcom,ipq8074-pinctrl"; + reg = <0x1000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <0x2>; + interrupt-controller; + #interrupt-cells = <0x2>; + }; + + intc: interrupt-controller@b000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <0x3>; + reg = <0xb000000 0x1000>, + <0xb002000 0x1000>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + gcc: gcc@1800000 { + compatible = "qcom,gcc-ipq8074"; + reg = <0x1800000 0x80000>; + #clock-cells = <0x1>; + #reset-cells = <0x1>; + }; + + serial@78b3000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x78b3000 0x200>; + interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + }; + + cpus { + #address-cells = <0x1>; + #size-cells = <0x0>; + + cpu-map { + + cluster0 { + + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + }; + }; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + enable-method = "psci"; + reg = <0x1>; + next-level-cache = <&L2_0>; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + enable-method = "psci"; + reg = <0x2>; + next-level-cache = <&L2_0>; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + enable-method = "psci"; + reg = <0x3>; + next-level-cache = <&L2_0>; + }; + + L2_0: l2-cache { + compatible = "cache"; + cache-level = <0x2>; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + clocks { + sleep_clk: sleep_clk { + compatible = "fixed-clock"; + clock-frequency = <32000>; + #clock-cells = <0>; + }; + + xo: xo { + compatible = "fixed-clock"; + clock-frequency = <19200000>; + #clock-cells = <0>; + }; + }; +};