@@ -401,21 +401,42 @@ static int qm_init_pfdr(struct device *dev, u32 pfdr_start, u32 num)
}
/*
- * Ideally we would use the DMA API to turn rmem->base into a DMA address
- * (especially if iommu translations ever get involved). Unfortunately, the
- * DMA API currently does not allow mapping anything that is not backed with
- * a struct page.
+ * QMan needs two global memory areas initialized at boot time:
+ * 1) FQD: Frame Queue Descriptors used to manage frame queues
+ * 2) PFDR: Packed Frame Queue Descriptor Records used to store frames
+ * Both areas are reserved using the device tree reserved memory framework
+ * and the addresses and sizes are initialized when the QMan device is probed
*/
static dma_addr_t fqd_a, pfdr_a;
static size_t fqd_sz, pfdr_sz;
+#ifdef CONFIG_PPC
+/*
+ * Support for PPC Device Tree backward compatibility when compatiable
+ * string is set to fsl-qman-fqd and fsl-qman-pfdr
+ */
+static int zero_priv_mem(phys_addr_t addr, size_t sz)
+{
+ /* map as cacheable, non-guarded */
+ void __iomem *tmpp = ioremap_prot(addr, sz, 0);
+
+ if (!tmpp)
+ return -ENOMEM;
+
+ memset_io(tmpp, 0, sz);
+ flush_dcache_range((unsigned long)tmpp,
+ (unsigned long)tmpp + sz);
+ iounmap(tmpp);
+
+ return 0;
+}
+
static int qman_fqd(struct reserved_mem *rmem)
{
fqd_a = rmem->base;
fqd_sz = rmem->size;
WARN_ON(!(fqd_a && fqd_sz));
-
return 0;
}
RESERVEDMEM_OF_DECLARE(qman_fqd, "fsl,qman-fqd", qman_fqd);
@@ -431,32 +452,13 @@ static int qman_pfdr(struct reserved_mem *rmem)
}
RESERVEDMEM_OF_DECLARE(qman_pfdr, "fsl,qman-pfdr", qman_pfdr);
+#endif
+
static unsigned int qm_get_fqid_maxcnt(void)
{
return fqd_sz / 64;
}
-/*
- * Flush this memory range from data cache so that QMAN originated
- * transactions for this memory region could be marked non-coherent.
- */
-static int zero_priv_mem(struct device *dev, struct device_node *node,
- phys_addr_t addr, size_t sz)
-{
- /* map as cacheable, non-guarded */
- void __iomem *tmpp = ioremap_prot(addr, sz, 0);
-
- if (!tmpp)
- return -ENOMEM;
-
- memset_io(tmpp, 0, sz);
- flush_dcache_range((unsigned long)tmpp,
- (unsigned long)tmpp + sz);
- iounmap(tmpp);
-
- return 0;
-}
-
static void log_edata_bits(struct device *dev, u32 bit_count)
{
u32 i, j, mask = 0xffffffff;
@@ -687,11 +689,12 @@ static int qman_resource_init(struct device *dev)
static int fsl_qman_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
- struct device_node *node = dev->of_node;
+ struct device_node *mem_node, *node = dev->of_node;
struct resource *res;
int ret, err_irq;
u16 id;
u8 major, minor;
+ u64 size;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
@@ -727,10 +730,83 @@ static int fsl_qman_probe(struct platform_device *pdev)
qm_channel_caam = QMAN_CHANNEL_CAAM_REV3;
}
- ret = zero_priv_mem(dev, node, fqd_a, fqd_sz);
- WARN_ON(ret);
- if (ret)
- return -ENODEV;
+ if (fqd_a) {
+#ifdef CONFIG_PPC
+ /*
+ * For PPC backward DT compatibility
+ * FQD memory MUST be zero'd by software
+ */
+ zero_priv_mem(fqd_a, fqd_sz);
+#else
+ WARN(1, "Unexpected archiceture using non shared-dma-mem reservations");
+#endif
+ } else {
+ /*
+ * Order of memory regions is assumed as FQD followed by PFDR
+ * in order to ensure allocations from the correct regions the
+ * driver initializes then allocates each piece in order
+ */
+ ret = of_reserved_mem_device_init_by_idx(dev, dev->of_node, 0);
+ if (ret) {
+ dev_err(dev, "of_reserved_mem_device_init_by_idx(0) failed 0x%x\n",
+ ret);
+ return -ENODEV;
+ }
+ mem_node = of_parse_phandle(dev->of_node, "memory-region", 0);
+ if (mem_node) {
+ ret = of_property_read_u64(mem_node, "size", &size);
+ if (ret) {
+ dev_err(dev, "FQD: of_address_to_resource fails 0x%x\n",
+ ret);
+ return -ENODEV;
+ }
+ fqd_sz = size;
+ } else {
+ dev_err(dev, "No memory-region found for FQD\n");
+ return -ENODEV;
+ }
+ if (!dma_zalloc_coherent(dev, fqd_sz, &fqd_a, 0)) {
+ dev_err(dev, "Alloc FQD memory failed\n");
+ return -ENODEV;
+ }
+
+ /*
+ * Disassociate the FQD reserved memory area from the device
+ * because a device can only have one DMA memory area. This
+ * should be fine since the memory is allocated and initialized
+ * and only ever accessed by the QMan device from now on
+ */
+ of_reserved_mem_device_release(dev);
+ }
+ dev_dbg(dev, "Allocated FQD 0x%llx 0x%zx\n", fqd_a, fqd_sz);
+
+ if (!pfdr_a) {
+ /* Setup PFDR memory */
+ ret = of_reserved_mem_device_init_by_idx(dev, dev->of_node, 1);
+ if (ret) {
+ dev_err(dev, "of_reserved_mem_device_init(1) failed 0x%x\n",
+ ret);
+ return -ENODEV;
+ }
+ mem_node = of_parse_phandle(dev->of_node, "memory-region", 1);
+ if (mem_node) {
+ ret = of_property_read_u64(mem_node, "size", &size);
+ if (ret) {
+ dev_err(dev, "PFDR: of_address_to_resource fails 0x%x\n",
+ ret);
+ return -ENODEV;
+ }
+ pfdr_sz = size;
+ } else {
+ dev_err(dev, "No memory-region found for PFDR\n");
+ return -ENODEV;
+ }
+ if (!dma_zalloc_coherent(dev, pfdr_sz, &pfdr_a, 0)) {
+ dev_err(dev, "Alloc PFDR Failed size 0x%zx\n", pfdr_sz);
+ return -ENODEV;
+ }
+ }
+ dev_info(dev, "Allocated PFDR 0x%llx 0x%zx\n", pfdr_a, pfdr_sz);
ret = qman_init_ccsr(dev);
if (ret) {
@@ -28,12 +28,12 @@
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
#include "dpaa_sys.h"
#include <soc/fsl/qman.h>
#include <linux/iommu.h>
+#include <linux/dma-contiguous.h>
+#include <linux/of_address.h>
#if defined(CONFIG_FSL_PAMU)
#include <asm/fsl_pamu_stash.h>
@@ -30,7 +30,5 @@
#include "qman_priv.h"
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
int qman_test_stash(void);
int qman_test_api(void);
Use the shared-memory-pool mechanism for frame queue descriptor and packed frame descriptor record area allocations. Signed-off-by: Roy Pledge <roy.pledge@nxp.com> --- drivers/soc/fsl/qbman/qman_ccsr.c | 138 +++++++++++++++++++++++++++++--------- drivers/soc/fsl/qbman/qman_priv.h | 4 +- drivers/soc/fsl/qbman/qman_test.h | 2 - 3 files changed, 109 insertions(+), 35 deletions(-)