@@ -292,13 +292,13 @@ enum rk3288_plls {
COMPOSITE_NOMUX(0, "aclk_core_mp", "armclk", CLK_IGNORE_UNUSED,
RK3288_CLKSEL_CON(0), 4, 4, DFLAGS | CLK_DIVIDER_READ_ONLY,
RK3288_CLKGATE_CON(12), 6, GFLAGS),
- COMPOSITE_NOMUX(0, "atclk", "armclk", 0,
+ COMPOSITE_NOMUX(0, "atclk", "armclk", CLK_IGNORE_UNUSED,
RK3288_CLKSEL_CON(37), 4, 5, DFLAGS | CLK_DIVIDER_READ_ONLY,
RK3288_CLKGATE_CON(12), 7, GFLAGS),
COMPOSITE_NOMUX(0, "pclk_dbg_pre", "armclk", CLK_IGNORE_UNUSED,
RK3288_CLKSEL_CON(37), 9, 5, DFLAGS | CLK_DIVIDER_READ_ONLY,
RK3288_CLKGATE_CON(12), 8, GFLAGS),
- GATE(0, "pclk_dbg", "pclk_dbg_pre", 0,
+ GATE(0, "pclk_dbg", "pclk_dbg_pre", CLK_IGNORE_UNUSED,
RK3288_CLKGATE_CON(12), 9, GFLAGS),
GATE(0, "cs_dbg", "pclk_dbg_pre", CLK_IGNORE_UNUSED,
RK3288_CLKGATE_CON(12), 10, GFLAGS),
@@ -626,7 +626,7 @@ enum rk3288_plls {
INVERTER(SCLK_HSADC, "sclk_hsadc", "sclk_hsadc_out",
RK3288_CLKSEL_CON(22), 7, IFLAGS),
- GATE(0, "jtag", "ext_jtag", 0,
+ GATE(0, "jtag", "ext_jtag", CLK_IGNORE_UNUSED,
RK3288_CLKGATE_CON(4), 14, GFLAGS),
COMPOSITE_NODIV(SCLK_USBPHY480M_SRC, "usbphy480m_src", mux_usbphy480m_p, 0,
@@ -635,7 +635,7 @@ enum rk3288_plls {
COMPOSITE_NODIV(SCLK_HSICPHY480M, "sclk_hsicphy480m", mux_hsicphy480m_p, 0,
RK3288_CLKSEL_CON(29), 0, 2, MFLAGS,
RK3288_CLKGATE_CON(3), 6, GFLAGS),
- GATE(0, "hsicphy12m_xin12m", "xin12m", 0,
+ GATE(0, "hsicphy12m_xin12m", "xin12m", CLK_IGNORE_UNUSED,
RK3288_CLKGATE_CON(13), 9, GFLAGS),
DIV(0, "hsicphy12m_usbphy", "sclk_hsicphy480m", 0,
RK3288_CLKSEL_CON(11), 8, 6, DFLAGS),
@@ -816,6 +816,12 @@ enum rk3288_plls {
"pclk_alive_niu",
"pclk_pd_pmu",
"pclk_pmu_niu",
+ "pclk_core_niu",
+ "pclk_ddrupctl0",
+ "pclk_publ0",
+ "pclk_ddrupctl1",
+ "pclk_publ1",
+ "pmu_hclk_otg0",
};
static void __iomem *rk3288_cru_base;
The atclk\dbg\jtag\xin12m\pclk_core clks no driver to handle them. But this clks need enable,so make it as critical. The ddrupctl0\ddrupctl1\publ0\publ1 clks no driver to handle them, Chip design requirements for these clock to always on, The new document will update the description of these clock. The pmu_hclk_otg0 is Chip design defect, must be always on, The new document will update the description of this clock. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> --- drivers/clk/rockchip/clk-rk3288.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-)