| Message ID | 1495207218-11372-3-git-send-email-philippe.cornu@st.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Fri, May 19, 2017 at 05:20:15PM +0200, Philippe CORNU wrote: > This patch adds documentation of device tree bindings for the > Synopsys DesignWare MIPI DSI host DRM bridge driver. > > Signed-off-by: Philippe CORNU <philippe.cornu@st.com> > --- > .../bindings/display/bridge/dw_mipi_dsi.txt | 36 ++++++++++++++++++++++ > 1 file changed, 36 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt > > diff --git a/Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt b/Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt > new file mode 100644 > index 0000000..652c0f5 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt > @@ -0,0 +1,36 @@ > +Synopsys DesignWare MIPI DSI host controller > +============================================ > + > +This document defines device tree properties for the Synopsys DesignWare MIPI > +DSI host controller. It doesn't constitue a device tree binding specification > +by itself but is meant to be referenced by platform-specific device tree > +bindings. > + > +When referenced from platform device tree bindings the properties defined in > +this document are defined as follows. The platform device tree bindings are > +responsible for defining whether each property is required or optional. > + > +- reg: Memory mapped base address and length of the DWC MIPI DSI registers. > + > +- clocks: References to all the clocks specified in the clock-names property > + as specified in [1]. > + > +- clock-names: The DWC MIPI DSI host uses the following clocks. > + > + - "pclk" is the peripheral clock for either AHB and APB (mandatory). > + - "ref" is the pll reference clock (mandatory). > + > +- resets: References to all the resets specified in the reset-names property > + as specified in [2]. (optional) > + > +- reset-names: string reset name, must be "apb" if used. (optional) > + > +- ports: The connectivity of the DWC MIPI DSI host controller > + with the rest of the system is expressed in using ports as specified in the > + device graph bindings in [3] & [4]. The numbering of the ports > + is platform-specific. Why is numbering platform specific? Are there differing numbers of independent channels? I'm fine if platforms can override, but can we define what is the default or common case? > + > +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt > +[2] Documentation/devicetree/bindings/reset/reset.txt > +[3] Documentation/devicetree/bindings/media/video-interfaces.txt > +[4] Documentation/devicetree/bindings/graph.txt > -- > 1.9.1 >
diff --git a/Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt b/Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt new file mode 100644 index 0000000..652c0f5 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt @@ -0,0 +1,36 @@ +Synopsys DesignWare MIPI DSI host controller +============================================ + +This document defines device tree properties for the Synopsys DesignWare MIPI +DSI host controller. It doesn't constitue a device tree binding specification +by itself but is meant to be referenced by platform-specific device tree +bindings. + +When referenced from platform device tree bindings the properties defined in +this document are defined as follows. The platform device tree bindings are +responsible for defining whether each property is required or optional. + +- reg: Memory mapped base address and length of the DWC MIPI DSI registers. + +- clocks: References to all the clocks specified in the clock-names property + as specified in [1]. + +- clock-names: The DWC MIPI DSI host uses the following clocks. + + - "pclk" is the peripheral clock for either AHB and APB (mandatory). + - "ref" is the pll reference clock (mandatory). + +- resets: References to all the resets specified in the reset-names property + as specified in [2]. (optional) + +- reset-names: string reset name, must be "apb" if used. (optional) + +- ports: The connectivity of the DWC MIPI DSI host controller + with the rest of the system is expressed in using ports as specified in the + device graph bindings in [3] & [4]. The numbering of the ports + is platform-specific. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt +[2] Documentation/devicetree/bindings/reset/reset.txt +[3] Documentation/devicetree/bindings/media/video-interfaces.txt +[4] Documentation/devicetree/bindings/graph.txt
This patch adds documentation of device tree bindings for the Synopsys DesignWare MIPI DSI host DRM bridge driver. Signed-off-by: Philippe CORNU <philippe.cornu@st.com> --- .../bindings/display/bridge/dw_mipi_dsi.txt | 36 ++++++++++++++++++++++ 1 file changed, 36 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt