From patchwork Thu Jun 1 21:08:13 2017 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Timur Tabi X-Patchwork-Id: 9761251 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork.web.codeaurora.org (Postfix) with ESMTP id 386F6602BC for ; Thu, 1 Jun 2017 21:08:44 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 28B32283BA for ; Thu, 1 Jun 2017 21:08:44 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id 1D3B828508; Thu, 1 Jun 2017 21:08:44 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-1.9 required=2.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID autolearn=ham version=3.3.1 Received: from bombadil.infradead.org (bombadil.infradead.org [65.50.211.133]) (using TLSv1.2 with cipher AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.wl.linuxfoundation.org (Postfix) with ESMTPS id 5A70E283BA for ; Thu, 1 Jun 2017 21:08:43 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20170209; h=Sender: Content-Transfer-Encoding:Content-Type:MIME-Version:Cc:List-Subscribe: List-Help:List-Post:List-Archive:List-Unsubscribe:List-Id:Message-Id:Date: Subject:To:From:Reply-To:Content-ID:Content-Description:Resent-Date: Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:In-Reply-To: References:List-Owner; bh=6ZnWnWbR1umBhmBqprlSyfOzY+J0ZYrmJ3SthYvOW4I=; b=dmZ nitzFI9PPBzKBAQYvi2o0RsuIIZrJQomQDtjncThlHYorS8CFvEf9elw/kfAbgDV/K/QgIalUcEIM jVX5Imvir0I82yo44hMQVa07sx1ZfXRLrD+iusykwxSF/JiFyfAJsPiwBQsQ6GtgHZxomBSdDxNsj dicTQnBvK8igW8NQ2+XukM4IKV3KjG048zkgpZeYDbW6BUSn2oonK2bfhNBuJp2eCM2poolZ0u+Sx +BEDnO95/eqSu6ze/TSZzKhCYEaLJ5yjlnM0RsmNhYgwSRHW4pZwSzf56WVXt3t3MLNTj16HUGB0M kWMFihUC4Gq0pegfotO3a3xCtcwoL0A==; Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.87 #1 (Red Hat Linux)) id 1dGXKk-0000rs-Ae; Thu, 01 Jun 2017 21:08:42 +0000 Received: from smtp.codeaurora.org ([198.145.29.96]) by bombadil.infradead.org with esmtps (Exim 4.87 #1 (Red Hat Linux)) id 1dGXKh-0000q0-0k for linux-arm-kernel@lists.infradead.org; Thu, 01 Jun 2017 21:08:40 +0000 Received: by smtp.codeaurora.org (Postfix, from userid 1000) id 55E3260861; Thu, 1 Jun 2017 21:08:17 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=codeaurora.org; s=default; t=1496351297; bh=vINSsaPtC34OoSO5NPP1jadMQ6cin/s2ImBAEKiD+fY=; h=From:To:Cc:Subject:Date:From; b=fOyyvTGE6Nzx1/HCMJ7qZocznpPHwRS8MtSrinNWwyVMgCONgOoTLXbFi1fDG0sxD yns9WDPdrpmoLHhB8T3jeJuqrCU+kvRU4Pi+SKfBaGO3LvmgnhBKQFAx0lnqC/+fdO xYQT4sIHNyjipsjvebfeu80nLShRmBOoAcsoZiUk= Received: from timur-ubuntu.qualcomm.com (i-global254.qualcomm.com [199.106.103.254]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-SHA256 (128/128 bits)) (No client certificate requested) (Authenticated sender: timur@smtp.codeaurora.org) by smtp.codeaurora.org (Postfix) with ESMTPSA id 4875D6022B; Thu, 1 Jun 2017 21:08:15 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=codeaurora.org; s=default; t=1496351296; bh=vINSsaPtC34OoSO5NPP1jadMQ6cin/s2ImBAEKiD+fY=; h=From:To:Cc:Subject:Date:From; b=BV/4TN3mgFGBK8UUEwR42BdqMoC1NnfjWm40+d4AJJwU1Cqj46/JP/Sn6FEvvjAef nb5pT1j/X4wIrnRSLKRrRQ8/tIUaI7w6jLo8HLR9ekRBTTe8PG7MqaxRKVkvq9aQBC aovr+bdbCkCOUV5A5cqywvnava6NKfKitshbvpBg= DMARC-Filter: OpenDMARC Filter v1.3.2 smtp.codeaurora.org 4875D6022B Authentication-Results: pdx-caf-mail.web.codeaurora.org; dmarc=none (p=none dis=none) header.from=codeaurora.org Authentication-Results: pdx-caf-mail.web.codeaurora.org; spf=none smtp.mailfrom=timur@codeaurora.org From: Timur Tabi To: linux-arm-kernel@lists.infradead.org, "David S. Miller" , Florian Fainelli , Manoj Iyer , netdev@vger.kernel.org, stable@vger.kernel.org, zefir.kurtisi@neratec.com, andrew@lunn.ch, matthias.may@neratec.com Subject: [for 4.12] net: qcom/emac: do not use hardware mdio automatic polling Date: Thu, 1 Jun 2017 16:08:13 -0500 Message-Id: <1496351293-6846-1-git-send-email-timur@codeaurora.org> X-Mailer: git-send-email 1.9.1 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20170601_140839_104721_BAB0AA0C X-CRM114-Status: GOOD ( 23.43 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.21 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: timur@codeaurora.org MIME-Version: 1.0 Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org X-Virus-Scanned: ClamAV using ClamSMTP Use software polling (PHY_POLL) to check for link state changes instead of relying on the EMAC's hardware polling feature. Some PHY drivers are unable to get a functioning link because the HW polling is not robust enough. The EMAC is able to poll the PHY on the MDIO bus looking for link state changes (via the Link Status bit in the Status Register at address 0x1). When the link state changes, the EMAC triggers an interrupt and tells the driver what the new state is. The feature eliminates the need for software to poll the MDIO bus. Unfortunately, this feature is incompatible with phylib, because it ignores everything that the PHY core and PHY drivers are trying to do. In particular: 1. It assumes a compatible register set, so PHYs with different registers may not work. 2. It doesn't allow for hardware errata that have work-arounds implemented in the PHY driver. 3. It doesn't support multiple register pages. If the PHY core switches the register set to another page, the EMAC won't know the page has changed and will still attempt to read the same PHY register. 4. It only checks the copper side of the link, not the SGMII side. Some PHY drivers (e.g. at803x) may also check the SGMII side, and report the link as not ready during autonegotiation if the SGMII link is still down. Phylib then waits for another interrupt to query the PHY again, but the EMAC won't send another interrupt because it thinks the link is up. Cc: stable@vger.kernel.org # 4.11.x Tested-by: Manoj Iyer Signed-off-by: Timur Tabi --- drivers/net/ethernet/qualcomm/emac/emac-mac.c | 2 +- drivers/net/ethernet/qualcomm/emac/emac-phy.c | 75 ++------------------------- drivers/net/ethernet/qualcomm/emac/emac.c | 22 +------- 3 files changed, 6 insertions(+), 93 deletions(-) diff --git a/drivers/net/ethernet/qualcomm/emac/emac-mac.c b/drivers/net/ethernet/qualcomm/emac/emac-mac.c index e635605..1c0dbaa 100644 --- a/drivers/net/ethernet/qualcomm/emac/emac-mac.c +++ b/drivers/net/ethernet/qualcomm/emac/emac-mac.c @@ -932,7 +932,7 @@ int emac_mac_up(struct emac_adapter *adpt) emac_mac_config(adpt); emac_mac_rx_descs_refill(adpt, &adpt->rx_q); - adpt->phydev->irq = PHY_IGNORE_INTERRUPT; + adpt->phydev->irq = PHY_POLL; ret = phy_connect_direct(netdev, adpt->phydev, emac_adjust_link, PHY_INTERFACE_MODE_SGMII); if (ret) { diff --git a/drivers/net/ethernet/qualcomm/emac/emac-phy.c b/drivers/net/ethernet/qualcomm/emac/emac-phy.c index 441c1936..18461fc 100644 --- a/drivers/net/ethernet/qualcomm/emac/emac-phy.c +++ b/drivers/net/ethernet/qualcomm/emac/emac-phy.c @@ -13,15 +13,11 @@ /* Qualcomm Technologies, Inc. EMAC PHY Controller driver. */ -#include -#include -#include #include #include #include #include #include "emac.h" -#include "emac-mac.h" /* EMAC base register offsets */ #define EMAC_MDIO_CTRL 0x001414 @@ -52,62 +48,10 @@ #define MDIO_WAIT_TIMES 1000 -#define EMAC_LINK_SPEED_DEFAULT (\ - EMAC_LINK_SPEED_10_HALF |\ - EMAC_LINK_SPEED_10_FULL |\ - EMAC_LINK_SPEED_100_HALF |\ - EMAC_LINK_SPEED_100_FULL |\ - EMAC_LINK_SPEED_1GB_FULL) - -/** - * emac_phy_mdio_autopoll_disable() - disable mdio autopoll - * @adpt: the emac adapter - * - * The autopoll feature takes over the MDIO bus. In order for - * the PHY driver to be able to talk to the PHY over the MDIO - * bus, we need to temporarily disable the autopoll feature. - */ -static int emac_phy_mdio_autopoll_disable(struct emac_adapter *adpt) -{ - u32 val; - - /* disable autopoll */ - emac_reg_update32(adpt->base + EMAC_MDIO_CTRL, MDIO_AP_EN, 0); - - /* wait for any mdio polling to complete */ - if (!readl_poll_timeout(adpt->base + EMAC_MDIO_CTRL, val, - !(val & MDIO_BUSY), 100, MDIO_WAIT_TIMES * 100)) - return 0; - - /* failed to disable; ensure it is enabled before returning */ - emac_reg_update32(adpt->base + EMAC_MDIO_CTRL, 0, MDIO_AP_EN); - - return -EBUSY; -} - -/** - * emac_phy_mdio_autopoll_disable() - disable mdio autopoll - * @adpt: the emac adapter - * - * The EMAC has the ability to poll the external PHY on the MDIO - * bus for link state changes. This eliminates the need for the - * driver to poll the phy. If if the link state does change, - * the EMAC issues an interrupt on behalf of the PHY. - */ -static void emac_phy_mdio_autopoll_enable(struct emac_adapter *adpt) -{ - emac_reg_update32(adpt->base + EMAC_MDIO_CTRL, 0, MDIO_AP_EN); -} - static int emac_mdio_read(struct mii_bus *bus, int addr, int regnum) { struct emac_adapter *adpt = bus->priv; u32 reg; - int ret; - - ret = emac_phy_mdio_autopoll_disable(adpt); - if (ret) - return ret; emac_reg_update32(adpt->base + EMAC_PHY_STS, PHY_ADDR_BMSK, (addr << PHY_ADDR_SHFT)); @@ -122,24 +66,15 @@ static int emac_mdio_read(struct mii_bus *bus, int addr, int regnum) if (readl_poll_timeout(adpt->base + EMAC_MDIO_CTRL, reg, !(reg & (MDIO_START | MDIO_BUSY)), 100, MDIO_WAIT_TIMES * 100)) - ret = -EIO; - else - ret = (reg >> MDIO_DATA_SHFT) & MDIO_DATA_BMSK; + return -EIO; - emac_phy_mdio_autopoll_enable(adpt); - - return ret; + return (reg >> MDIO_DATA_SHFT) & MDIO_DATA_BMSK; } static int emac_mdio_write(struct mii_bus *bus, int addr, int regnum, u16 val) { struct emac_adapter *adpt = bus->priv; u32 reg; - int ret; - - ret = emac_phy_mdio_autopoll_disable(adpt); - if (ret) - return ret; emac_reg_update32(adpt->base + EMAC_PHY_STS, PHY_ADDR_BMSK, (addr << PHY_ADDR_SHFT)); @@ -155,11 +90,9 @@ static int emac_mdio_write(struct mii_bus *bus, int addr, int regnum, u16 val) if (readl_poll_timeout(adpt->base + EMAC_MDIO_CTRL, reg, !(reg & (MDIO_START | MDIO_BUSY)), 100, MDIO_WAIT_TIMES * 100)) - ret = -EIO; + return -EIO; - emac_phy_mdio_autopoll_enable(adpt); - - return ret; + return 0; } /* Configure the MDIO bus and connect the external PHY */ diff --git a/drivers/net/ethernet/qualcomm/emac/emac.c b/drivers/net/ethernet/qualcomm/emac/emac.c index 28a8cdc..98a326f 100644 --- a/drivers/net/ethernet/qualcomm/emac/emac.c +++ b/drivers/net/ethernet/qualcomm/emac/emac.c @@ -50,19 +50,7 @@ #define DMAR_DLY_CNT_DEF 15 #define DMAW_DLY_CNT_DEF 4 -#define IMR_NORMAL_MASK (\ - ISR_ERROR |\ - ISR_GPHY_LINK |\ - ISR_TX_PKT |\ - GPHY_WAKEUP_INT) - -#define IMR_EXTENDED_MASK (\ - SW_MAN_INT |\ - ISR_OVER |\ - ISR_ERROR |\ - ISR_GPHY_LINK |\ - ISR_TX_PKT |\ - GPHY_WAKEUP_INT) +#define IMR_NORMAL_MASK (ISR_ERROR | ISR_OVER | ISR_TX_PKT) #define ISR_TX_PKT (\ TX_PKT_INT |\ @@ -70,10 +58,6 @@ TX_PKT_INT2 |\ TX_PKT_INT3) -#define ISR_GPHY_LINK (\ - GPHY_LINK_UP_INT |\ - GPHY_LINK_DOWN_INT) - #define ISR_OVER (\ RFD0_UR_INT |\ RFD1_UR_INT |\ @@ -187,10 +171,6 @@ irqreturn_t emac_isr(int _irq, void *data) if (status & ISR_OVER) net_warn_ratelimited("warning: TX/RX overflow\n"); - /* link event */ - if (status & ISR_GPHY_LINK) - phy_mac_interrupt(adpt->phydev, !!(status & GPHY_LINK_UP_INT)); - exit: /* enable the interrupt */ writel(irq->mask, adpt->base + EMAC_INT_MASK);