| Message ID | 1496395441-29526-1-git-send-email-j-keerthy@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
* Keerthy <j-keerthy@ti.com> [170602 02:27]: > dcdc3 supplies to DDR on AM43x series. When we set both > min and max values to the same value. The regulator framework > sets that particular voltage. This is bad as we are changing > the ddr voltage when executing from ddr. Hence remove the min and > max values. The ddr supply voltage shall be set from bootloader > when not executing from ddr and not while executing from kernel. > > The previous discussion can be found here: > > http://www.spinics.net/lists/devicetree/msg56399.html > > Signed-off-by: Keerthy <j-keerthy@ti.com> Applying into omap-for-v4.13/dt thanks. Tony
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index 397e98b..29a538e 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -549,8 +549,6 @@ dcdc3: regulator-dcdc3 { regulator-name = "vdcdc3"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; regulator-boot-on; regulator-always-on; regulator-state-mem { diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts index a62e158..2c6bf06 100644 --- a/arch/arm/boot/dts/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -451,8 +451,6 @@ dcdc3: regulator-dcdc3 { regulator-name = "vdds_ddr"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; regulator-boot-on; regulator-always-on; regulator-state-mem { diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index f6648ab..54f40f3 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -442,8 +442,6 @@ dcdc3: regulator-dcdc3 { regulator-name = "vdcdc3"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; regulator-boot-on; regulator-always-on; };
dcdc3 supplies to DDR on AM43x series. When we set both min and max values to the same value. The regulator framework sets that particular voltage. This is bad as we are changing the ddr voltage when executing from ddr. Hence remove the min and max values. The ddr supply voltage shall be set from bootloader when not executing from ddr and not while executing from kernel. The previous discussion can be found here: http://www.spinics.net/lists/devicetree/msg56399.html Signed-off-by: Keerthy <j-keerthy@ti.com> --- Changes in v2: * Corrected $subject arch/arm/boot/dts/am437x-gp-evm.dts | 2 -- arch/arm/boot/dts/am437x-sk-evm.dts | 2 -- arch/arm/boot/dts/am43x-epos-evm.dts | 2 -- 3 files changed, 6 deletions(-)