@@ -62,7 +62,7 @@ struct mpu_rgn {
};
struct mpu_rgn_info {
- u32 mpuir;
+ unsigned int used;
struct mpu_rgn rgns[MPU_MAX_REGIONS];
};
extern struct mpu_rgn_info mpu_rgn_info;
@@ -60,7 +60,7 @@ asmlinkage void secondary_start_kernel(void);
*/
struct secondary_data {
union {
- unsigned long mpu_rgn_szr;
+ struct mpu_rgn_info *mpu_rgn_info;
u64 pgdir;
};
unsigned long swapper_pg_dir;
@@ -23,6 +23,7 @@
#include <asm/mach/arch.h>
#include <asm/thread_info.h>
#include <asm/memory.h>
+#include <asm/mpu.h>
#include <asm/procinfo.h>
#include <asm/suspend.h>
#include <asm/vdso_datapage.h>
@@ -183,5 +184,15 @@ int main(void)
#ifdef CONFIG_VDSO
DEFINE(VDSO_DATA_SIZE, sizeof(union vdso_data_store));
#endif
+ BLANK();
+#ifdef CONFIG_ARM_MPU
+ DEFINE(MPU_RNG_INFO_RNGS, offsetof(struct mpu_rgn_info, rgns));
+ DEFINE(MPU_RNG_INFO_USED, offsetof(struct mpu_rgn_info, used));
+
+ DEFINE(MPU_RNG_SIZE, sizeof(struct mpu_rgn));
+ DEFINE(MPU_RGN_DRBAR, offsetof(struct mpu_rgn, drbar));
+ DEFINE(MPU_RGN_DRSR, offsetof(struct mpu_rgn, drsr));
+ DEFINE(MPU_RGN_DRACR, offsetof(struct mpu_rgn, dracr));
+#endif
return 0;
}
@@ -13,6 +13,7 @@
*/
#include <linux/linkage.h>
#include <linux/init.h>
+#include <linux/errno.h>
#include <asm/assembler.h>
#include <asm/ptrace.h>
@@ -110,8 +111,8 @@ ENTRY(secondary_startup)
#ifdef CONFIG_ARM_MPU
/* Use MPU region info supplied by __cpu_up */
- ldr r6, [r7] @ get secondary_data.mpu_szr
- bl __setup_mpu @ Initialize the MPU
+ ldr r6, [r7] @ get secondary_data.mpu_rgn_info
+ bl __secondary_setup_mpu @ Initialize the MPU
#endif
badr lr, 1f @ return (PIC) address
@@ -204,13 +205,13 @@ ENTRY(__setup_mpu)
mrc p15, 0, r0, c0, c1, 4 @ Read ID_MMFR0
and r0, r0, #(MMFR0_PMSA) @ PMSA field
teq r0, #(MMFR0_PMSAv7) @ PMSA v7
- bne __error_p @ Fail: ARM_MPU on NOT v7 PMSA
+ bxne lr
/* Determine whether the D/I-side memory map is unified. We set the
* flags here and continue to use them for the rest of this function */
mrc p15, 0, r0, c0, c0, 4 @ MPUIR
ands r5, r0, #MPUIR_DREGION_SZMASK @ 0 size d region => No MPU
- beq __error_p @ Fail: ARM_MPU and no MPU
+ bxeq lr
tst r0, #MPUIR_nU @ MPUIR_nU = 0 for unified
/* Setup second region first to free up r6 */
@@ -238,27 +239,70 @@ ENTRY(__setup_mpu)
setup_region r0, r5, r6, MPU_INSTR_SIDE @ 0x0, BG region, enabled
2: isb
- /* Vectors region */
- set_region_nr r0, #MPU_VECTORS_REGION
+ /* Enable the MPU */
+ mrc p15, 0, r0, c1, c0, 0 @ Read SCTLR
+ bic r0, r0, #CR_BR @ Disable the 'default mem-map'
+ orr r0, r0, #CR_M @ Set SCTRL.M (MPU on)
+ mcr p15, 0, r0, c1, c0, 0 @ Enable MPU
+ isb
+
+ ret lr
+ENDPROC(__setup_mpu)
+
+#ifdef CONFIG_SMP
+/*
+ * r6: pointer at mpu_rgn_info
+ */
+
+ENTRY(__secondary_setup_mpu)
+ /* Probe for v7 PMSA compliance */
+ mrc p15, 0, r0, c0, c1, 4 @ Read ID_MMFR0
+ and r0, r0, #(MMFR0_PMSA) @ PMSA field
+ teq r0, #(MMFR0_PMSAv7) @ PMSA v7
+ bne __error_p
+
+ /* Determine whether the D/I-side memory map is unified. We set the
+ * flags here and continue to use them for the rest of this function */
+ mrc p15, 0, r0, c0, c0, 4 @ MPUIR
+ ands r5, r0, #MPUIR_DREGION_SZMASK @ 0 size d region => No MPU
+ beq __error_p
+
+ ldr r4, [r6, #MPU_RNG_INFO_USED]
+ mov r5, #MPU_RNG_SIZE
+ add r3, r6, #MPU_RNG_INFO_RNGS
+ mla r3, r4, r5, r3
+
+1:
+ tst r0, #MPUIR_nU @ MPUIR_nU = 0 for unified
+ sub r3, r3, #MPU_RNG_SIZE
+ sub r4, r4, #1
+
+ set_region_nr r0, r4
isb
- /* Shared, inaccessible to PL0, rw PL1 */
- mov r0, #CONFIG_VECTORS_BASE @ Cover from VECTORS_BASE
- ldr r5,=(MPU_AP_PL1RW_PL0NA | MPU_RGN_NORMAL)
- /* Writing N to bits 5:1 (RSR_SZ) --> region size 2^N+1 */
- mov r6, #(((2 * PAGE_SHIFT - 1) << MPU_RSR_SZ) | 1 << MPU_RSR_EN)
- setup_region r0, r5, r6, MPU_DATA_SIDE @ VECTORS_BASE, PL0 NA, enabled
- beq 3f @ Memory-map not unified
- setup_region r0, r5, r6, MPU_INSTR_SIDE @ VECTORS_BASE, PL0 NA, enabled
-3: isb
+ ldr r0, [r3, #MPU_RGN_DRBAR]
+ ldr r6, [r3, #MPU_RGN_DRSR]
+ ldr r5, [r3, #MPU_RGN_DRACR]
+
+ setup_region r0, r5, r6, MPU_DATA_SIDE
+ beq 2f
+ setup_region r0, r5, r6, MPU_INSTR_SIDE
+2: isb
+
+ mrc p15, 0, r0, c0, c0, 4 @ Reevaluate the MPUIR
+ cmp r4, #0
+ bgt 1b
/* Enable the MPU */
mrc p15, 0, r0, c1, c0, 0 @ Read SCTLR
- bic r0, r0, #CR_BR @ Disable the 'default mem-map'
+ bic r0, r0, #CR_BR @ Disable the 'default mem-map'
orr r0, r0, #CR_M @ Set SCTRL.M (MPU on)
mcr p15, 0, r0, c1, c0, 0 @ Enable MPU
isb
+
ret lr
-ENDPROC(__setup_mpu)
-#endif
+ENDPROC(__secondary_setup_mpu)
+
+#endif /* CONFIG_SMP */
+#endif /* CONFIG_ARM_MPU */
#include "head-common.S"
@@ -114,7 +114,7 @@ int __cpu_up(unsigned int cpu, struct task_struct *idle)
*/
secondary_data.stack = task_stack_page(idle) + THREAD_START_SP;
#ifdef CONFIG_ARM_MPU
- secondary_data.mpu_rgn_szr = mpu_rgn_info.rgns[MPU_RAM_REGION].drsr;
+ secondary_data.mpu_rgn_info = &mpu_rgn_info;
#endif
#ifdef CONFIG_MMU
@@ -12,6 +12,9 @@
#include "mm.h"
+static unsigned int __initdata mpu_min_region_order;
+static unsigned int __initdata mpu_max_regions;
+
#define DRBAR __ACCESS_CP15(c6, 0, c1, 0)
#define IRBAR __ACCESS_CP15(c6, 0, c1, 1)
#define DRSR __ACCESS_CP15(c6, 0, c1, 2)
@@ -75,6 +78,11 @@ static inline u32 irbar_read(void)
return read_sysreg(IRBAR);
}
+static int __init mpu_present(void)
+{
+ return ((read_cpuid_ext(CPUID_EXT_MMFR0) & MMFR0_PMSA) == MMFR0_PMSAv7);
+}
+
/* MPU initialisation functions */
void __init adjust_lowmem_bounds_mpu(void)
{
@@ -85,6 +93,9 @@ void __init adjust_lowmem_bounds_mpu(void)
phys_addr_t mem_start;
phys_addr_t mem_end;
+ if (!mpu_present())
+ return;
+
for_each_memblock(memory, reg) {
if (first) {
/*
@@ -146,12 +157,7 @@ void __init adjust_lowmem_bounds_mpu(void)
}
-static int mpu_present(void)
-{
- return ((read_cpuid_ext(CPUID_EXT_MMFR0) & MMFR0_PMSA) == MMFR0_PMSAv7);
-}
-
-static int mpu_max_regions(void)
+static int __init __mpu_max_regions(void)
{
/*
* We don't support a different number of I/D side regions so if we
@@ -159,6 +165,7 @@ static int mpu_max_regions(void)
* whichever side has a smaller number of supported regions.
*/
u32 dregions, iregions, mpuir;
+
mpuir = read_cpuid(CPUID_MPUIR);
dregions = iregions = (mpuir & MPUIR_DREGION_SZMASK) >> MPUIR_DREGION;
@@ -171,15 +178,16 @@ static int mpu_max_regions(void)
return min(dregions, iregions);
}
-static int mpu_iside_independent(void)
+static int __init mpu_iside_independent(void)
{
/* MPUIR.nU specifies whether there is *not* a unified memory map */
return read_cpuid(CPUID_MPUIR) & MPUIR_nU;
}
-static int mpu_min_region_order(void)
+static int __init __mpu_min_region_order(void)
{
u32 drbar_result, irbar_result;
+
/* We've kept a region free for this probing */
rgnr_write(MPU_PROBE_REGION);
isb();
@@ -198,22 +206,24 @@ static int mpu_min_region_order(void)
}
isb(); /* Ensure that MPU region operations have completed */
/* Return whichever result is larger */
+
return __ffs(max(drbar_result, irbar_result));
}
-static int mpu_setup_region(unsigned int number, phys_addr_t start,
+static int __init mpu_setup_region(unsigned int number, phys_addr_t start,
unsigned int size_order, unsigned int properties)
{
u32 size_data;
/* We kept a region free for probing resolution of MPU regions*/
- if (number > mpu_max_regions() || number == MPU_PROBE_REGION)
+ if (number > mpu_max_regions
+ || number >= MPU_MAX_REGIONS)
return -ENOENT;
if (size_order > 32)
return -ENOMEM;
- if (size_order < mpu_min_region_order())
+ if (size_order < mpu_min_region_order)
return -ENOMEM;
/* Writing N to bits 5:1 (RSR_SZ) specifies region size 2^N+1 */
@@ -240,6 +250,9 @@ static int mpu_setup_region(unsigned int number, phys_addr_t start,
mpu_rgn_info.rgns[number].dracr = properties;
mpu_rgn_info.rgns[number].drbar = start;
mpu_rgn_info.rgns[number].drsr = size_data;
+
+ mpu_rgn_info.used++;
+
return 0;
}
@@ -248,19 +261,38 @@ static int mpu_setup_region(unsigned int number, phys_addr_t start,
*/
void __init mpu_setup(void)
{
- int region_err;
+ int region = 0, err = 0;
+
if (!mpu_present())
return;
- region_err = mpu_setup_region(MPU_RAM_REGION, PHYS_OFFSET,
- ilog2(memblock.memory.regions[0].size),
- MPU_AP_PL1RW_PL0RW | MPU_RGN_NORMAL);
- if (region_err) {
- panic("MPU region initialization failure! %d", region_err);
+ /* Free-up MPU_PROBE_REGION */
+ mpu_min_region_order = __mpu_min_region_order();
+
+ /* How many regions are supported */
+ mpu_max_regions = __mpu_max_regions();
+
+ /* Now setup MPU (order is important) */
+
+ /* Background */
+ err |= mpu_setup_region(region++, 0, 32,
+ MPU_ACR_XN | MPU_RGN_STRONGLY_ORDERED | MPU_AP_PL1RW_PL0NA);
+
+ /* RAM */
+ err |= mpu_setup_region(region++, PHYS_OFFSET,
+ ilog2(memblock.memory.regions[0].size),
+ MPU_AP_PL1RW_PL0RW | MPU_RGN_NORMAL);
+
+ /* Vectors */
+ err |= mpu_setup_region(region++, vectors_base,
+ ilog2(2 * PAGE_SIZE),
+ MPU_AP_PL1RW_PL0NA | MPU_RGN_NORMAL);
+ if (err) {
+ panic("MPU region initialization failure! %d", err);
} else {
pr_info("Using ARMv7 PMSA Compliant MPU. "
- "Region independence: %s, Max regions: %d\n",
+ "Region independence: %s, Used %d of %d regions\n",
mpu_iside_independent() ? "Yes" : "No",
- mpu_max_regions());
+ mpu_rgn_info.used, mpu_max_regions);
}
}