@@ -1,17 +1,25 @@
STM32 Real Time Clock
Required properties:
-- compatible: "st,stm32-rtc".
+- compatible: can be either "st,stm32-rtc" or "st,stm32h7-rtc", depending on
+ the device is compatible with stm32(f4/f7) or stm32h7.
- reg: address range of rtc register set.
-- clocks: reference to the clock entry ck_rtc.
+- clocks: can use up to two clocks, depending on part used:
+ - "rtc_ck": RTC clock source.
+ It is required on stm32(f4/f7) and stm32h7.
+ - "pclk": RTC APB interface clock.
+ It is not present on stm32(f4/f7).
+ It is required on stm32h7.
+- clock-names: must be "rtc_ck" and "pclk".
+ It is required only on stm32h7.
- interrupt-parent: phandle for the interrupt controller.
- interrupts: rtc alarm interrupt.
- st,syscfg: phandle for pwrcfg, mandatory to disable/enable backup domain
(RTC registers) write protection.
-Optional properties (to override default ck_rtc parent clock):
-- assigned-clocks: reference to the ck_rtc clock entry.
-- assigned-clock-parents: phandle of the new parent clock of ck_rtc.
+Optional properties (to override default rtc_ck parent clock):
+- assigned-clocks: reference to the rtc_ck clock entry.
+- assigned-clock-parents: phandle of the new parent clock of rtc_ck.
Example:
@@ -25,3 +33,17 @@ Example:
interrupts = <17 1>;
st,syscfg = <&pwrcfg>;
};
+
+ rtc: rtc@58004000 {
+ compatible = "st,stm32h7-rtc";
+ reg = <0x58004000 0x400>;
+ clocks = <&rcc RTCAPB_CK>, <&rcc RTC_CK>;
+ clock-names = "pclk", "rtc_ck";
+ assigned-clocks = <&rcc RTC_CK>;
+ assigned-clock-parents = <&rcc LSE_CK>;
+ interrupt-parent = <&exti>;
+ interrupts = <17 1>;
+ interrupt-names = "alarm";
+ st,syscfg = <&pwrcfg>;
+ status = "disabled";
+ };