diff mbox

[v2,2/3] dt-bindings: display: panel: Add support for Orise Tech otm8009a dsi panel

Message ID 1499677333-10571-3-git-send-email-philippe.cornu@st.com (mailing list archive)
State New, archived
Headers show

Commit Message

Philippe CORNU July 10, 2017, 9:02 a.m. UTC
The Orise Tech OTM8009A is a 3.97" 480x800 TFT LCD panel connected using
a MIPI-DSI video interface. Its backlight is managed through the DSI link.

Signed-off-by: Philippe CORNU <philippe.cornu@st.com>
---
 .../bindings/display/panel/orisetech,otm8009a.txt   | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt

Comments

Rob Herring (Arm) July 11, 2017, 2:57 a.m. UTC | #1
On Mon, Jul 10, 2017 at 11:02:12AM +0200, Philippe CORNU wrote:
> The Orise Tech OTM8009A is a 3.97" 480x800 TFT LCD panel connected using
> a MIPI-DSI video interface. Its backlight is managed through the DSI link.
> 
> Signed-off-by: Philippe CORNU <philippe.cornu@st.com>
> ---
>  .../bindings/display/panel/orisetech,otm8009a.txt   | 21 +++++++++++++++++++++
>  1 file changed, 21 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt

Acked-by: Rob Herring <robh@kernel.org>
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt
new file mode 100644
index 0000000..6862028
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt
@@ -0,0 +1,21 @@ 
+Orise Tech OTM8009A 3.97" 480x800 TFT LCD panel (MIPI-DSI video mode)
+
+The Orise Tech OTM8009A is a 3.97" 480x800 TFT LCD panel connected using
+a MIPI-DSI video interface. Its backlight is managed through the DSI link.
+
+Required properties:
+  - compatible: "orisetech,otm8009a"
+  - reg: the virtual channel number of a DSI peripheral
+
+Optional properties:
+  - reset-gpios: a GPIO spec for the reset pin (active low).
+
+Example:
+&dsi {
+	...
+	panel@0 {
+		compatible = "orisetech,otm8009a";
+		reg = <0>;
+		reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>;
+	};
+};