@@ -110,43 +110,35 @@ static int orion_mdio_read(struct mii_bus *bus, int mii_id,
int regnum)
{
struct orion_mdio_dev *dev = bus->priv;
- int count;
u32 val;
int ret;
mutex_lock(&dev->lock);
ret = orion_mdio_wait_ready(bus);
- if (ret < 0) {
- mutex_unlock(&dev->lock);
- return ret;
- }
+ if (ret < 0)
+ goto out;
writel(((mii_id << MVMDIO_SMI_PHY_ADDR_SHIFT) |
(regnum << MVMDIO_SMI_PHY_REG_SHIFT) |
MVMDIO_SMI_READ_OPERATION),
dev->regs);
- /* Wait for the value to become available */
- count = 0;
- while (1) {
- val = readl(dev->regs);
- if (val & MVMDIO_SMI_READ_VALID)
- break;
-
- if (count > 100) {
- dev_err(bus->parent, "Timeout when reading PHY\n");
- mutex_unlock(&dev->lock);
- return -ETIMEDOUT;
- }
+ ret = orion_mdio_wait_ready(bus);
+ if (ret < 0)
+ goto out;
- udelay(10);
- count++;
+ val = readl(dev->regs);
+ if (!(val & MVMDIO_SMI_READ_VALID)) {
+ dev_err(bus->parent, "SMI bus read not valid\n");
+ ret = -ENODEV;
+ goto out;
}
+ ret = val & 0xFFFF;
+out:
mutex_unlock(&dev->lock);
-
- return val & 0xFFFF;
+ return ret;
}
static int orion_mdio_write(struct mii_bus *bus, int mii_id,
Replace manual poll of MVMDIO_SMI_READ_VALID with a call to orion_mdio_wait_ready. This ensures a consistent timeout, eliminates a busy loop, and allows for use of interrupts on systems that support them. Signed-off-by: Leigh Brown <leigh@solinno.co.uk> --- drivers/net/ethernet/marvell/mvmdio.c | 34 +++++++++++++--------------------- 1 file changed, 13 insertions(+), 21 deletions(-)