| Message ID | 1501143817-15843-2-git-send-email-shawnguo@kernel.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Thu, Jul 27, 2017 at 04:23:36PM +0800, Shawn Guo wrote: > From: Shawn Guo <shawn.guo@linaro.org> > > It adds bindings document for ZTE ZX PWM controller. The device > has two clocks: PCLK and WCLK. The PCLK is for register access, and > WCLK is the reference clock for calculating period and duty cycles. > Also, the device supports polarity configuration, so #pwm-cells should > be 3. > > Signed-off-by: Shawn Guo <shawn.guo@linaro.org> > Acked-by: Rob Herring <robh@kernel.org> > --- > Documentation/devicetree/bindings/pwm/pwm-zx.txt | 22 ++++++++++++++++++++++ > 1 file changed, 22 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pwm/pwm-zx.txt Applied to for-4.14/drivers, thanks. Thierry
diff --git a/Documentation/devicetree/bindings/pwm/pwm-zx.txt b/Documentation/devicetree/bindings/pwm/pwm-zx.txt new file mode 100644 index 000000000000..a6bcc75c9164 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/pwm-zx.txt @@ -0,0 +1,22 @@ +ZTE ZX PWM controller + +Required properties: + - compatible: Should be "zte,zx296718-pwm". + - reg: Physical base address and length of the controller's registers. + - clocks : The phandle and specifier referencing the controller's clocks. + - clock-names: "pclk" for PCLK, "wclk" for WCLK to the PWM controller. The + PCLK is for register access, while WCLK is the reference clock for + calculating period and duty cycles. + - #pwm-cells: Should be 3. See pwm.txt in this directory for a description of + the cells format. + +Example: + + pwm: pwm@1439000 { + compatible = "zte,zx296718-pwm"; + reg = <0x1439000 0x1000>; + clocks = <&lsp1crm LSP1_PWM_PCLK>, + <&lsp1crm LSP1_PWM_WCLK>; + clock-names = "pclk", "wclk"; + #pwm-cells = <3>; + };