| Message ID | 1501652310-3638-2-git-send-email-anup.patel@broadcom.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Wed, 2 Aug 2017 11:08:30 +0530 Anup Patel <anup.patel@broadcom.com> wrote: > This patch adds Broadcom FlexRM low-level reset for > VFIO platform. > > It will do the following: > 1. Disable/Deactivate each FlexRM ring > 2. Flush each FlexRM ring > > The cleanup sequence for FlexRM rings is adapted from > Broadcom FlexRM mailbox driver. > > Signed-off-by: Anup Patel <anup.patel@broadcom.com> > Reviewed-by: Oza Oza <oza.oza@broadcom.com> > Reviewed-by: Scott Branden <scott.branden@broadcom.com> > Reviewed-by: Eric Auger <eric.auger@redhat.com> > --- > drivers/vfio/platform/reset/Kconfig | 8 ++ > drivers/vfio/platform/reset/Makefile | 1 + > .../vfio/platform/reset/vfio_platform_bcmflexrm.c | 100 +++++++++++++++++++++ > 3 files changed, 109 insertions(+) > create mode 100644 drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c > > diff --git a/drivers/vfio/platform/reset/Kconfig b/drivers/vfio/platform/reset/Kconfig > index 70cccc5..8833805 100644 > --- a/drivers/vfio/platform/reset/Kconfig > +++ b/drivers/vfio/platform/reset/Kconfig > @@ -13,3 +13,11 @@ config VFIO_PLATFORM_AMDXGBE_RESET > Enables the VFIO platform driver to handle reset for AMD XGBE > > If you don't know what to do here, say N. > + > +config VFIO_PLATFORM_BCMFLEXRM_RESET > + tristate "VFIO support for Broadcom FlexRM reset" > + depends on VFIO_PLATFORM && (ARCH_BCM_IPROC || COMPILE_TEST) > + help > + Enables the VFIO platform driver to handle reset for Broadcom FlexRM > + > + If you don't know what to do here, say N. > diff --git a/drivers/vfio/platform/reset/Makefile b/drivers/vfio/platform/reset/Makefile > index 93f4e23..8d9874b 100644 > --- a/drivers/vfio/platform/reset/Makefile > +++ b/drivers/vfio/platform/reset/Makefile > @@ -5,3 +5,4 @@ ccflags-y += -Idrivers/vfio/platform > > obj-$(CONFIG_VFIO_PLATFORM_CALXEDAXGMAC_RESET) += vfio-platform-calxedaxgmac.o > obj-$(CONFIG_VFIO_PLATFORM_AMDXGBE_RESET) += vfio-platform-amdxgbe.o > +obj-$(CONFIG_VFIO_PLATFORM_BCMFLEXRM_RESET) += vfio_platform_bcmflexrm.o > diff --git a/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c b/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c > new file mode 100644 > index 0000000..104c3c1 > --- /dev/null > +++ b/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c > @@ -0,0 +1,100 @@ > +/* > + * Copyright (C) 2017 Broadcom > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program. If not, see <http://www.gnu.org/licenses/>. > + */ > + > +/* > + * This driver provides reset support for Broadcom FlexRM ring manager > + * to VFIO platform. > + */ > + > +#include <linux/delay.h> > +#include <linux/init.h> > +#include <linux/io.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > + > +#include "vfio_platform_private.h" > + > +/* FlexRM configuration */ > +#define RING_REGS_SIZE 0x10000 > +#define RING_VER_MAGIC 0x76303031 > + > +/* Per-Ring register offsets */ > +#define RING_VER 0x000 > +#define RING_CONTROL 0x034 > +#define RING_FLUSH_DONE 0x038 > + > +/* Register RING_CONTROL fields */ > +#define CONTROL_FLUSH_SHIFT 5 > + > +/* Register RING_FLUSH_DONE fields */ > +#define FLUSH_DONE_MASK 0x1 > + > +static int vfio_platform_bcmflexrm_shutdown(void __iomem *ring) > +{ > + unsigned int timeout; > + > + /* Disable/inactivate ring */ > + writel_relaxed(0x0, ring + RING_CONTROL); > + > + /* Flush ring with timeout of 1s */ > + timeout = 1000; > + writel_relaxed(BIT(CONTROL_FLUSH_SHIFT), ring + RING_CONTROL); > + do { > + if (readl_relaxed(ring + RING_FLUSH_DONE) & FLUSH_DONE_MASK) > + break; > + mdelay(1); > + } while (timeout--); > + > + if (!timeout) { > + pr_warn("VFIO FlexRM shutdown timeout\n"); > + return -ETIMEDOUT; > + } This doesn't work, timeout is ~0 here. > + > + return 0; > +} > + > +static int vfio_platform_bcmflexrm_reset(struct vfio_platform_device *vdev) > +{ > + int rc = 0; > + void __iomem *ring; > + struct vfio_platform_region *reg = &vdev->regions[0]; > + > + /* Map FlexRM ring registers if not mapped */ > + if (!reg->ioaddr) { > + reg->ioaddr = ioremap_nocache(reg->addr, reg->size); > + if (!reg->ioaddr) > + return -ENOMEM; > + } > + > + /* Discover and shutdown each FlexRM ring */ > + for (ring = reg->ioaddr; > + ring < (reg->ioaddr + reg->size); ring += RING_REGS_SIZE) { > + if (readl_relaxed(ring + RING_VER) == RING_VER_MAGIC) { > + rc = vfio_platform_bcmflexrm_shutdown(ring); > + if (rc) > + break; > + } > + } > + > + return rc; > +} > + > +module_vfio_reset_handler("brcm,iproc-flexrm-mbox", > + vfio_platform_bcmflexrm_reset); > + > +MODULE_LICENSE("GPL v2"); > +MODULE_AUTHOR("Anup Patel <anup.patel@broadcom.com>"); > +MODULE_DESCRIPTION("Reset support for Broadcom FlexRM VFIO platform device");
On Fri, Aug 11, 2017 at 12:53 AM, Alex Williamson <alex.williamson@redhat.com> wrote: > On Wed, 2 Aug 2017 11:08:30 +0530 > Anup Patel <anup.patel@broadcom.com> wrote: > >> This patch adds Broadcom FlexRM low-level reset for >> VFIO platform. >> >> It will do the following: >> 1. Disable/Deactivate each FlexRM ring >> 2. Flush each FlexRM ring >> >> The cleanup sequence for FlexRM rings is adapted from >> Broadcom FlexRM mailbox driver. >> >> Signed-off-by: Anup Patel <anup.patel@broadcom.com> >> Reviewed-by: Oza Oza <oza.oza@broadcom.com> >> Reviewed-by: Scott Branden <scott.branden@broadcom.com> >> Reviewed-by: Eric Auger <eric.auger@redhat.com> >> --- >> drivers/vfio/platform/reset/Kconfig | 8 ++ >> drivers/vfio/platform/reset/Makefile | 1 + >> .../vfio/platform/reset/vfio_platform_bcmflexrm.c | 100 +++++++++++++++++++++ >> 3 files changed, 109 insertions(+) >> create mode 100644 drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c >> >> diff --git a/drivers/vfio/platform/reset/Kconfig b/drivers/vfio/platform/reset/Kconfig >> index 70cccc5..8833805 100644 >> --- a/drivers/vfio/platform/reset/Kconfig >> +++ b/drivers/vfio/platform/reset/Kconfig >> @@ -13,3 +13,11 @@ config VFIO_PLATFORM_AMDXGBE_RESET >> Enables the VFIO platform driver to handle reset for AMD XGBE >> >> If you don't know what to do here, say N. >> + >> +config VFIO_PLATFORM_BCMFLEXRM_RESET >> + tristate "VFIO support for Broadcom FlexRM reset" >> + depends on VFIO_PLATFORM && (ARCH_BCM_IPROC || COMPILE_TEST) >> + help >> + Enables the VFIO platform driver to handle reset for Broadcom FlexRM >> + >> + If you don't know what to do here, say N. >> diff --git a/drivers/vfio/platform/reset/Makefile b/drivers/vfio/platform/reset/Makefile >> index 93f4e23..8d9874b 100644 >> --- a/drivers/vfio/platform/reset/Makefile >> +++ b/drivers/vfio/platform/reset/Makefile >> @@ -5,3 +5,4 @@ ccflags-y += -Idrivers/vfio/platform >> >> obj-$(CONFIG_VFIO_PLATFORM_CALXEDAXGMAC_RESET) += vfio-platform-calxedaxgmac.o >> obj-$(CONFIG_VFIO_PLATFORM_AMDXGBE_RESET) += vfio-platform-amdxgbe.o >> +obj-$(CONFIG_VFIO_PLATFORM_BCMFLEXRM_RESET) += vfio_platform_bcmflexrm.o >> diff --git a/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c b/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c >> new file mode 100644 >> index 0000000..104c3c1 >> --- /dev/null >> +++ b/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c >> @@ -0,0 +1,100 @@ >> +/* >> + * Copyright (C) 2017 Broadcom >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License version 2 as >> + * published by the Free Software Foundation. >> + * >> + * This program is distributed in the hope that it will be useful, >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + * >> + * You should have received a copy of the GNU General Public License >> + * along with this program. If not, see <http://www.gnu.org/licenses/>. >> + */ >> + >> +/* >> + * This driver provides reset support for Broadcom FlexRM ring manager >> + * to VFIO platform. >> + */ >> + >> +#include <linux/delay.h> >> +#include <linux/init.h> >> +#include <linux/io.h> >> +#include <linux/kernel.h> >> +#include <linux/module.h> >> + >> +#include "vfio_platform_private.h" >> + >> +/* FlexRM configuration */ >> +#define RING_REGS_SIZE 0x10000 >> +#define RING_VER_MAGIC 0x76303031 >> + >> +/* Per-Ring register offsets */ >> +#define RING_VER 0x000 >> +#define RING_CONTROL 0x034 >> +#define RING_FLUSH_DONE 0x038 >> + >> +/* Register RING_CONTROL fields */ >> +#define CONTROL_FLUSH_SHIFT 5 >> + >> +/* Register RING_FLUSH_DONE fields */ >> +#define FLUSH_DONE_MASK 0x1 >> + >> +static int vfio_platform_bcmflexrm_shutdown(void __iomem *ring) >> +{ >> + unsigned int timeout; >> + >> + /* Disable/inactivate ring */ >> + writel_relaxed(0x0, ring + RING_CONTROL); >> + >> + /* Flush ring with timeout of 1s */ >> + timeout = 1000; >> + writel_relaxed(BIT(CONTROL_FLUSH_SHIFT), ring + RING_CONTROL); >> + do { >> + if (readl_relaxed(ring + RING_FLUSH_DONE) & FLUSH_DONE_MASK) >> + break; >> + mdelay(1); >> + } while (timeout--); >> + >> + if (!timeout) { >> + pr_warn("VFIO FlexRM shutdown timeout\n"); >> + return -ETIMEDOUT; >> + } > > > This doesn't work, timeout is ~0 here. Sure, I will use "--timeout" instead of "timeout--" which will fix the issue. Thanks for pointing. Regards, Anup
diff --git a/drivers/vfio/platform/reset/Kconfig b/drivers/vfio/platform/reset/Kconfig index 70cccc5..8833805 100644 --- a/drivers/vfio/platform/reset/Kconfig +++ b/drivers/vfio/platform/reset/Kconfig @@ -13,3 +13,11 @@ config VFIO_PLATFORM_AMDXGBE_RESET Enables the VFIO platform driver to handle reset for AMD XGBE If you don't know what to do here, say N. + +config VFIO_PLATFORM_BCMFLEXRM_RESET + tristate "VFIO support for Broadcom FlexRM reset" + depends on VFIO_PLATFORM && (ARCH_BCM_IPROC || COMPILE_TEST) + help + Enables the VFIO platform driver to handle reset for Broadcom FlexRM + + If you don't know what to do here, say N. diff --git a/drivers/vfio/platform/reset/Makefile b/drivers/vfio/platform/reset/Makefile index 93f4e23..8d9874b 100644 --- a/drivers/vfio/platform/reset/Makefile +++ b/drivers/vfio/platform/reset/Makefile @@ -5,3 +5,4 @@ ccflags-y += -Idrivers/vfio/platform obj-$(CONFIG_VFIO_PLATFORM_CALXEDAXGMAC_RESET) += vfio-platform-calxedaxgmac.o obj-$(CONFIG_VFIO_PLATFORM_AMDXGBE_RESET) += vfio-platform-amdxgbe.o +obj-$(CONFIG_VFIO_PLATFORM_BCMFLEXRM_RESET) += vfio_platform_bcmflexrm.o diff --git a/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c b/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c new file mode 100644 index 0000000..104c3c1 --- /dev/null +++ b/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c @@ -0,0 +1,100 @@ +/* + * Copyright (C) 2017 Broadcom + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +/* + * This driver provides reset support for Broadcom FlexRM ring manager + * to VFIO platform. + */ + +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> + +#include "vfio_platform_private.h" + +/* FlexRM configuration */ +#define RING_REGS_SIZE 0x10000 +#define RING_VER_MAGIC 0x76303031 + +/* Per-Ring register offsets */ +#define RING_VER 0x000 +#define RING_CONTROL 0x034 +#define RING_FLUSH_DONE 0x038 + +/* Register RING_CONTROL fields */ +#define CONTROL_FLUSH_SHIFT 5 + +/* Register RING_FLUSH_DONE fields */ +#define FLUSH_DONE_MASK 0x1 + +static int vfio_platform_bcmflexrm_shutdown(void __iomem *ring) +{ + unsigned int timeout; + + /* Disable/inactivate ring */ + writel_relaxed(0x0, ring + RING_CONTROL); + + /* Flush ring with timeout of 1s */ + timeout = 1000; + writel_relaxed(BIT(CONTROL_FLUSH_SHIFT), ring + RING_CONTROL); + do { + if (readl_relaxed(ring + RING_FLUSH_DONE) & FLUSH_DONE_MASK) + break; + mdelay(1); + } while (timeout--); + + if (!timeout) { + pr_warn("VFIO FlexRM shutdown timeout\n"); + return -ETIMEDOUT; + } + + return 0; +} + +static int vfio_platform_bcmflexrm_reset(struct vfio_platform_device *vdev) +{ + int rc = 0; + void __iomem *ring; + struct vfio_platform_region *reg = &vdev->regions[0]; + + /* Map FlexRM ring registers if not mapped */ + if (!reg->ioaddr) { + reg->ioaddr = ioremap_nocache(reg->addr, reg->size); + if (!reg->ioaddr) + return -ENOMEM; + } + + /* Discover and shutdown each FlexRM ring */ + for (ring = reg->ioaddr; + ring < (reg->ioaddr + reg->size); ring += RING_REGS_SIZE) { + if (readl_relaxed(ring + RING_VER) == RING_VER_MAGIC) { + rc = vfio_platform_bcmflexrm_shutdown(ring); + if (rc) + break; + } + } + + return rc; +} + +module_vfio_reset_handler("brcm,iproc-flexrm-mbox", + vfio_platform_bcmflexrm_reset); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Anup Patel <anup.patel@broadcom.com>"); +MODULE_DESCRIPTION("Reset support for Broadcom FlexRM VFIO platform device");