diff mbox

[v3,13/13] ARM: dts: rockchip: add accelerometer bma250e dt node for rv1108 evb

Message ID 1502423358-31375-1-git-send-email-andy.yan@rock-chips.com (mailing list archive)
State New, archived
Headers show

Commit Message

Andy Yan Aug. 11, 2017, 3:49 a.m. UTC 
Add dt node of bosch accelerometer bma250e on rv1108 evb.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
---

Changes in v3: None
Changes in v2: None

 arch/arm/boot/dts/rv1108-evb.dts | 7 +++++++
 1 file changed, 7 insertions(+)

Comments

Heiko Stübner Aug. 13, 2017, 12:16 p.m. UTC | #1 
Am Freitag, 11. August 2017, 11:49:18 CEST schrieb Andy Yan:
> Add dt node of bosch accelerometer bma250e on rv1108 evb.
> 
> Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
> ---
> 
> Changes in v3: None
> Changes in v2: None
> 
>  arch/arm/boot/dts/rv1108-evb.dts | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/rv1108-evb.dts b/arch/arm/boot/dts/rv1108-evb.dts
> index a1bd95e..6690083 100644
> --- a/arch/arm/boot/dts/rv1108-evb.dts
> +++ b/arch/arm/boot/dts/rv1108-evb.dts
> @@ -110,6 +110,13 @@
>  	i2c-scl-falling-time-ns = <16>;
>  	clock-frequency = <400000>;
>  
> +	bma250: accelerometer@19 {

please order such things by address,
foo@19 should come after bar@18 of course


Thanks
Heiko

> +		compatible = "bosch,bma250e";
> +		reg = <0x19>;
> +		interrupt-parent = <&gpio0>;
> +		interrupts = <RK_PB3 IRQ_TYPE_LEVEL_LOW>;
> +	};
> +
>  	rk805: pmic@18 {
>  		compatible = "rockchip,rk805";
>  		reg = <0x18>;
>
diff mbox

Patch

diff --git a/arch/arm/boot/dts/rv1108-evb.dts b/arch/arm/boot/dts/rv1108-evb.dts
index a1bd95e..6690083 100644
--- a/arch/arm/boot/dts/rv1108-evb.dts
+++ b/arch/arm/boot/dts/rv1108-evb.dts
@@ -110,6 +110,13 @@ 
 	i2c-scl-falling-time-ns = <16>;
 	clock-frequency = <400000>;
 
+	bma250: accelerometer@19 {
+		compatible = "bosch,bma250e";
+		reg = <0x19>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB3 IRQ_TYPE_LEVEL_LOW>;
+	};
+
 	rk805: pmic@18 {
 		compatible = "rockchip,rk805";
 		reg = <0x18>;