diff mbox

[v2,13/14] ARM: dts: at91: at91sam9x25ek: add pwm0

Message ID 1507630189-15504-14-git-send-email-claudiu.beznea@microchip.com (mailing list archive)
State New, archived
Headers show

Commit Message

Claudiu Beznea Oct. 10, 2017, 10:09 a.m. UTC 
From: Nicolas Ferre <nicolas.ferre@microchip.com>

Add the PWM0 interface and one output of channel 0 (on PC10) on this headless
board. The output conflicts with LCD and ISI, so only enable it for this
particular board of the series (ISI is enabled on at91sam9g25ek, as an example
but we can do the other way around).

Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
 arch/arm/boot/dts/at91sam9x25ek.dts | 6 ++++++
 1 file changed, 6 insertions(+)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/at91sam9x25ek.dts b/arch/arm/boot/dts/at91sam9x25ek.dts
index f8360fb23107..f705a3165656 100644
--- a/arch/arm/boot/dts/at91sam9x25ek.dts
+++ b/arch/arm/boot/dts/at91sam9x25ek.dts
@@ -29,6 +29,12 @@ 
 				phy-mode = "rmii";
 				status = "okay";
 			};
+
+			pwm0: pwm@f8034000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_pwm0_pwm0_1>;
+				status = "okay";
+			};
 		};
 	};
 };