@@ -16,6 +16,8 @@
#include <linux/of_irq.h>
#include <linux/clk.h>
#include <linux/reset.h>
+#include <linux/sched_clock.h>
+#include <linux/slab.h>
#include "timer-of.h"
@@ -23,16 +25,16 @@
#define TIM_DIER 0x0c
#define TIM_SR 0x10
#define TIM_EGR 0x14
+#define TIM_CNT 0x24
#define TIM_PSC 0x28
#define TIM_ARR 0x2c
+#define TIM_CCR1 0x34
#define TIM_CR1_CEN BIT(0)
-#define TIM_CR1_OPM BIT(3)
+#define TIM_CR1_UDIS BIT(1)
#define TIM_CR1_ARPE BIT(7)
-#define TIM_DIER_UIE BIT(0)
-
-#define TIM_SR_UIF BIT(0)
+#define TIM_DIER_CC1IE BIT(1)
#define TIM_EGR_UG BIT(0)
@@ -40,30 +42,34 @@ static int stm32_clock_event_shutdown(struct clock_event_device *evt)
{
struct timer_of *to = to_timer_of(evt);
- writel_relaxed(0, timer_of_base(to) + TIM_CR1);
+ writel_relaxed(0, timer_of_base(to) + TIM_DIER);
+
return 0;
}
-static int stm32_clock_event_set_periodic(struct clock_event_device *evt)
+static int stm32_clock_event_set_next_event(unsigned long evt,
+ struct clock_event_device *clkevt)
{
- struct timer_of *to = to_timer_of(evt);
+ struct timer_of *to = to_timer_of(clkevt);
+ unsigned long cnt;
- writel_relaxed(timer_of_period(to), timer_of_base(to) + TIM_ARR);
- writel_relaxed(TIM_CR1_ARPE | TIM_CR1_CEN, timer_of_base(to) + TIM_CR1);
+ cnt = readl_relaxed(timer_of_base(to) + TIM_CNT);
+ writel_relaxed(cnt + evt, timer_of_base(to) + TIM_CCR1);
+ writel_relaxed(TIM_DIER_CC1IE, timer_of_base(to) + TIM_DIER);
return 0;
}
-static int stm32_clock_event_set_next_event(unsigned long evt,
- struct clock_event_device *clkevt)
+static int stm32_clock_event_set_periodic(struct clock_event_device *evt)
{
- struct timer_of *to = to_timer_of(clkevt);
+ struct timer_of *to = to_timer_of(evt);
- writel_relaxed(evt, timer_of_base(to) + TIM_ARR);
- writel_relaxed(TIM_CR1_ARPE | TIM_CR1_OPM | TIM_CR1_CEN,
- timer_of_base(to) + TIM_CR1);
+ return stm32_clock_event_set_next_event(timer_of_period(to), evt);
+}
- return 0;
+static int stm32_clock_event_set_oneshot(struct clock_event_device *evt)
+{
+ return stm32_clock_event_set_next_event(0, evt);
}
static irqreturn_t stm32_clock_event_handler(int irq, void *dev_id)
@@ -73,12 +79,57 @@ static irqreturn_t stm32_clock_event_handler(int irq, void *dev_id)
writel_relaxed(0, timer_of_base(to) + TIM_SR);
+ if (clockevent_state_periodic(evt))
+ stm32_clock_event_set_periodic(evt);
+ else
+ stm32_clock_event_shutdown(evt);
+
evt->event_handler(evt);
return IRQ_HANDLED;
}
-static int __init stm32_clockevent_init(struct device_node *node)
+static void __init stm32_clockevent_init(struct timer_of *to)
+{
+ writel_relaxed(0, timer_of_base(to) + TIM_DIER);
+ writel_relaxed(0, timer_of_base(to) + TIM_SR);
+
+ clockevents_config_and_register(&to->clkevt,
+ timer_of_rate(to), 0x60, ~0U);
+}
+
+static void __iomem *stm32_timer_cnt __read_mostly;
+static u64 notrace stm32_read_sched_clock(void)
+{
+ return readl_relaxed(stm32_timer_cnt);
+}
+
+static int __init stm32_clocksource_init(struct timer_of *to)
+{
+ writel_relaxed(~0U, timer_of_base(to) + TIM_ARR);
+ writel_relaxed(0, timer_of_base(to) + TIM_PSC);
+ writel_relaxed(0, timer_of_base(to) + TIM_SR);
+ writel_relaxed(0, timer_of_base(to) + TIM_DIER);
+ writel_relaxed(0, timer_of_base(to) + TIM_SR);
+ writel_relaxed(TIM_CR1_ARPE | TIM_CR1_UDIS,
+ timer_of_base(to) + TIM_CR1);
+
+ /* Make sure that registers are updated */
+ writel_relaxed(TIM_EGR_UG, timer_of_base(to) + TIM_EGR);
+
+ /* Enable controller */
+ writel_relaxed(TIM_CR1_ARPE | TIM_CR1_UDIS | TIM_CR1_CEN,
+ timer_of_base(to) + TIM_CR1);
+
+ stm32_timer_cnt = timer_of_base(to) + TIM_CNT;
+ sched_clock_register(stm32_read_sched_clock, 32, timer_of_rate(to));
+
+ return clocksource_mmio_init(stm32_timer_cnt, "stm32_timer",
+ timer_of_rate(to), 250, 32,
+ clocksource_mmio_readl_up);
+}
+
+static int __init stm32_timer_init(struct device_node *node)
{
struct reset_control *rstc;
unsigned long max_arr;
@@ -90,12 +141,13 @@ static int __init stm32_clockevent_init(struct device_node *node)
return -ENOMEM;
to->flags = TIMER_OF_IRQ | TIMER_OF_CLOCK | TIMER_OF_BASE;
+
to->clkevt.name = "stm32_clockevent";
to->clkevt.rating = 200;
- to->clkevt.features = CLOCK_EVT_FEAT_PERIODIC;
+ to->clkevt.features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC;
to->clkevt.set_state_shutdown = stm32_clock_event_shutdown;
to->clkevt.set_state_periodic = stm32_clock_event_set_periodic;
- to->clkevt.set_state_oneshot = stm32_clock_event_shutdown;
+ to->clkevt.set_state_oneshot = stm32_clock_event_set_oneshot;
to->clkevt.tick_resume = stm32_clock_event_shutdown;
to->clkevt.set_next_event = stm32_clock_event_set_next_event;
@@ -119,17 +171,13 @@ static int __init stm32_clockevent_init(struct device_node *node)
return -EINVAL;
}
- writel_relaxed(0, timer_of_base(to) + TIM_ARR);
-
- writel_relaxed(0, timer_of_base(to) + TIM_PSC);
- writel_relaxed(TIM_EGR_UG, timer_of_base(to) + TIM_EGR);
- writel_relaxed(TIM_DIER_UIE, timer_of_base(to) + TIM_DIER);
- writel_relaxed(0, timer_of_base(to) + TIM_SR);
+ ret = stm32_clocksource_init(to);
+ if (ret)
+ return ret;
- clockevents_config_and_register(&to->clkevt,
- timer_of_period(to), 0x60, ~0U);
+ stm32_clockevent_init(to);
return 0;
}
-TIMER_OF_DECLARE(stm32, "st,stm32-timer", stm32_clockevent_init);
+TIMER_OF_DECLARE(stm32, "st,stm32-timer", stm32_timer_init);
Rework driver code to be able to implement clocksource and clockevent on the same hardware block. Before this patch only the counter of the hardware block was used to generate clock events. Now counter will be used to provide a 32 bits clock source and a comparator will provide clock events. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> --- drivers/clocksource/timer-stm32.c | 104 ++++++++++++++++++++++++++++---------- 1 file changed, 76 insertions(+), 28 deletions(-)