diff mbox

[v4,1/7] i2c: Switch to using gpiod interface for gpio bus recovery

Message ID 1509435239-64848-2-git-send-email-preid@electromag.com.au (mailing list archive)
State New, archived
Headers show

Commit Message

Phil Reid Oct. 31, 2017, 7:33 a.m. UTC 
Currently the i2c gpio recovery code uses gpio integer interface
instead of the gpiod. This change switch the core code to use
the gpiod while still retaining compatibility with the gpio integer
interface. This will allow individual driver to be updated and tested
individual to switch to using the gpiod interface.

Signed-off-by: Phil Reid <preid@electromag.com.au>
---
 drivers/i2c/i2c-core-base.c | 21 +++++++++++++++++----
 include/linux/i2c.h         |  2 ++
 2 files changed, 19 insertions(+), 4 deletions(-)

Comments

Jarkko Nikula Nov. 1, 2017, 4:23 p.m. UTC | #1 
On 10/31/2017 09:33 AM, Phil Reid wrote:
> Currently the i2c gpio recovery code uses gpio integer interface
> instead of the gpiod. This change switch the core code to use
> the gpiod while still retaining compatibility with the gpio integer
> interface. This will allow individual driver to be updated and tested
> individual to switch to using the gpiod interface.
> 
> Signed-off-by: Phil Reid <preid@electromag.com.au>
> ---
>   drivers/i2c/i2c-core-base.c | 21 +++++++++++++++++----
>   include/linux/i2c.h         |  2 ++
>   2 files changed, 19 insertions(+), 4 deletions(-)
> 
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
diff mbox

Patch

diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c
index db6558e..29c8e6d 100644
--- a/drivers/i2c/i2c-core-base.c
+++ b/drivers/i2c/i2c-core-base.c
@@ -133,17 +133,17 @@  static int i2c_device_uevent(struct device *dev, struct kobj_uevent_env *env)
 /* i2c bus recovery routines */
 static int get_scl_gpio_value(struct i2c_adapter *adap)
 {
-	return gpio_get_value(adap->bus_recovery_info->scl_gpio);
+	return gpiod_get_value_cansleep(adap->bus_recovery_info->scl_gpiod);
 }
 
 static void set_scl_gpio_value(struct i2c_adapter *adap, int val)
 {
-	gpio_set_value(adap->bus_recovery_info->scl_gpio, val);
+	gpiod_set_value_cansleep(adap->bus_recovery_info->scl_gpiod, val);
 }
 
 static int get_sda_gpio_value(struct i2c_adapter *adap)
 {
-	return gpio_get_value(adap->bus_recovery_info->sda_gpio);
+	return gpiod_get_value_cansleep(adap->bus_recovery_info->sda_gpiod);
 }
 
 static int i2c_get_gpios_for_recovery(struct i2c_adapter *adap)
@@ -158,6 +158,7 @@  static int i2c_get_gpios_for_recovery(struct i2c_adapter *adap)
 		dev_warn(dev, "Can't get SCL gpio: %d\n", bri->scl_gpio);
 		return ret;
 	}
+	bri->scl_gpiod = gpio_to_desc(bri->scl_gpio);
 
 	if (bri->get_sda) {
 		if (gpio_request_one(bri->sda_gpio, GPIOF_IN, "i2c-sda")) {
@@ -166,6 +167,7 @@  static int i2c_get_gpios_for_recovery(struct i2c_adapter *adap)
 					bri->sda_gpio);
 			bri->get_sda = NULL;
 		}
+		bri->sda_gpiod = gpio_to_desc(bri->sda_gpio);
 	}
 
 	return ret;
@@ -175,10 +177,13 @@  static void i2c_put_gpios_for_recovery(struct i2c_adapter *adap)
 {
 	struct i2c_bus_recovery_info *bri = adap->bus_recovery_info;
 
-	if (bri->get_sda)
+	if (bri->get_sda) {
 		gpio_free(bri->sda_gpio);
+		bri->sda_gpiod = NULL;
+	}
 
 	gpio_free(bri->scl_gpio);
+	bri->scl_gpiod = NULL;
 }
 
 /*
@@ -276,6 +281,14 @@  static void i2c_init_recovery(struct i2c_adapter *adap)
 		goto err;
 	}
 
+	if (bri->scl_gpiod && bri->recover_bus == i2c_generic_scl_recovery) {
+		bri->get_scl = get_scl_gpio_value;
+		bri->set_scl = set_scl_gpio_value;
+		if (bri->sda_gpiod)
+			bri->get_sda = get_sda_gpio_value;
+		return;
+	}
+
 	/* Generic GPIO recovery */
 	if (bri->recover_bus == i2c_generic_gpio_recovery) {
 		if (!gpio_is_valid(bri->scl_gpio)) {
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 0f77440..ea31cb3 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -513,6 +513,8 @@  struct i2c_bus_recovery_info {
 	/* gpio recovery */
 	int scl_gpio;
 	int sda_gpio;
+	struct gpio_desc *scl_gpiod;
+	struct gpio_desc *sda_gpiod;
 };
 
 int i2c_recover_bus(struct i2c_adapter *adap);