@@ -146,46 +146,6 @@ static int get_sda_gpio_value(struct i2c_adapter *adap)
return gpiod_get_value_cansleep(adap->bus_recovery_info->sda_gpiod);
}
-static int i2c_get_gpios_for_recovery(struct i2c_adapter *adap)
-{
- struct i2c_bus_recovery_info *bri = adap->bus_recovery_info;
- struct device *dev = &adap->dev;
- int ret = 0;
-
- ret = gpio_request_one(bri->scl_gpio, GPIOF_OPEN_DRAIN |
- GPIOF_OUT_INIT_HIGH, "i2c-scl");
- if (ret) {
- dev_warn(dev, "Can't get SCL gpio: %d\n", bri->scl_gpio);
- return ret;
- }
- bri->scl_gpiod = gpio_to_desc(bri->scl_gpio);
-
- if (bri->get_sda) {
- if (gpio_request_one(bri->sda_gpio, GPIOF_IN, "i2c-sda")) {
- /* work without SDA polling */
- dev_warn(dev, "Can't get SDA gpio: %d. Not using SDA polling\n",
- bri->sda_gpio);
- bri->get_sda = NULL;
- }
- bri->sda_gpiod = gpio_to_desc(bri->sda_gpio);
- }
-
- return ret;
-}
-
-static void i2c_put_gpios_for_recovery(struct i2c_adapter *adap)
-{
- struct i2c_bus_recovery_info *bri = adap->bus_recovery_info;
-
- if (bri->get_sda) {
- gpio_free(bri->sda_gpio);
- bri->sda_gpiod = NULL;
- }
-
- gpio_free(bri->scl_gpio);
- bri->scl_gpiod = NULL;
-}
-
/*
* We are generating clock pulses. ndelay() determines durating of clk pulses.
* We will generate clock with rate 100 KHz and so duration of both clock levels
@@ -194,7 +154,7 @@ static void i2c_put_gpios_for_recovery(struct i2c_adapter *adap)
#define RECOVERY_NDELAY 5000
#define RECOVERY_CLK_CNT 9
-static int i2c_generic_recovery(struct i2c_adapter *adap)
+int i2c_generic_scl_recovery(struct i2c_adapter *adap)
{
struct i2c_bus_recovery_info *bri = adap->bus_recovery_info;
int i = 0, val = 1, ret = 0;
@@ -236,28 +196,8 @@ static int i2c_generic_recovery(struct i2c_adapter *adap)
return ret;
}
-
-int i2c_generic_scl_recovery(struct i2c_adapter *adap)
-{
- return i2c_generic_recovery(adap);
-}
EXPORT_SYMBOL_GPL(i2c_generic_scl_recovery);
-int i2c_generic_gpio_recovery(struct i2c_adapter *adap)
-{
- int ret;
-
- ret = i2c_get_gpios_for_recovery(adap);
- if (ret)
- return ret;
-
- ret = i2c_generic_recovery(adap);
- i2c_put_gpios_for_recovery(adap);
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(i2c_generic_gpio_recovery);
-
int i2c_recover_bus(struct i2c_adapter *adap)
{
if (!adap->bus_recovery_info)
@@ -289,21 +229,7 @@ static void i2c_init_recovery(struct i2c_adapter *adap)
return;
}
- /* Generic GPIO recovery */
- if (bri->recover_bus == i2c_generic_gpio_recovery) {
- if (!gpio_is_valid(bri->scl_gpio)) {
- err_str = "invalid SCL gpio";
- goto err;
- }
-
- if (gpio_is_valid(bri->sda_gpio))
- bri->get_sda = get_sda_gpio_value;
- else
- bri->get_sda = NULL;
-
- bri->get_scl = get_scl_gpio_value;
- bri->set_scl = set_scl_gpio_value;
- } else if (bri->recover_bus == i2c_generic_scl_recovery) {
+ if (bri->recover_bus == i2c_generic_scl_recovery) {
/* Generic SCL recovery */
if (!bri->set_scl || !bri->get_scl) {
err_str = "no {get|set}_scl() found";
@@ -485,7 +485,7 @@ struct i2c_timings {
/**
* struct i2c_bus_recovery_info - I2C bus recovery information
* @recover_bus: Recover routine. Either pass driver's recover_bus() routine, or
- * i2c_generic_scl_recovery() or i2c_generic_gpio_recovery().
+ * i2c_generic_scl_recovery().
* @get_scl: This gets current value of SCL line. Mandatory for generic SCL
* recovery. Used internally for generic GPIO recovery.
* @set_scl: This sets/clears SCL line. Mandatory for generic SCL recovery. Used
@@ -497,8 +497,8 @@ struct i2c_timings {
* configure padmux here for SDA/SCL line or something else they want.
* @unprepare_recovery: This will be called after completing recovery. Platform
* may configure padmux here for SDA/SCL line or something else they want.
- * @scl_gpio: gpio number of the SCL line. Only required for GPIO recovery.
- * @sda_gpio: gpio number of the SDA line. Only required for GPIO recovery.
+ * @scl_gpiod: gpiod of the SCL line. Only required for GPIO recovery.
+ * @sda_gpiod: gpiod of the SDA line. Only required for GPIO recovery.
*/
struct i2c_bus_recovery_info {
int (*recover_bus)(struct i2c_adapter *);
@@ -511,8 +511,6 @@ struct i2c_bus_recovery_info {
void (*unprepare_recovery)(struct i2c_adapter *);
/* gpio recovery */
- int scl_gpio;
- int sda_gpio;
struct gpio_desc *scl_gpiod;
struct gpio_desc *sda_gpiod;
};
@@ -520,7 +518,6 @@ struct i2c_bus_recovery_info {
int i2c_recover_bus(struct i2c_adapter *adap);
/* Generic recovery routines */
-int i2c_generic_gpio_recovery(struct i2c_adapter *adap);
int i2c_generic_scl_recovery(struct i2c_adapter *adap);
/**
Remove all reference to code related to using integer based ids for scl/sda gpio for bus recovery. All in tree drivers are now using the gpio descriptors to specific the required gpios. Signed-off-by: Phil Reid <preid@electromag.com.au> --- drivers/i2c/i2c-core-base.c | 78 ++------------------------------------------- include/linux/i2c.h | 9 ++---- 2 files changed, 5 insertions(+), 82 deletions(-)