@@ -14,6 +14,7 @@
#include <dt-bindings/clock/qcom,gcc-msm8996.h>
#include <dt-bindings/clock/qcom,mmcc-msm8996.h>
#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
model = "Qualcomm Technologies, Inc. MSM8996";
@@ -88,6 +89,10 @@
enable-method = "psci";
clocks = <&kryocc 0>;
operating-points-v2 = <&cluster0_opp>;
+ /* cooling options */
+ cooling-min-level = <0>;
+ cooling-max-level = <15>;
+ #cooling-cells = <2>;
next-level-cache = <&L2_0>;
L2_0: l2-cache {
compatible = "cache";
@@ -102,6 +107,10 @@
enable-method = "psci";
clocks = <&kryocc 0>;
operating-points-v2 = <&cluster0_opp>;
+ /* cooling options */
+ cooling-min-level = <0>;
+ cooling-max-level = <15>;
+ #cooling-cells = <2>;
next-level-cache = <&L2_0>;
};
@@ -112,6 +121,10 @@
enable-method = "psci";
clocks = <&kryocc 1>;
operating-points-v2 = <&cluster1_opp>;
+ /* cooling options */
+ cooling-min-level = <0>;
+ cooling-max-level = <15>;
+ #cooling-cells = <2>;
next-level-cache = <&L2_1>;
L2_1: l2-cache {
compatible = "cache";
@@ -126,6 +139,10 @@
enable-method = "psci";
clocks = <&kryocc 1>;
operating-points-v2 = <&cluster1_opp>;
+ /* cooling options */
+ cooling-min-level = <0>;
+ cooling-max-level = <15>;
+ #cooling-cells = <2>;
next-level-cache = <&L2_1>;
};
@@ -336,18 +353,33 @@
thermal-sensors = <&tsens0 3>;
trips {
- cpu_alert0: trip0 {
+ cpu_alert0: cpu_alert0 {
temperature = <75000>;
hysteresis = <2000>;
+ type = "active";
+ };
+ cpu_warn0: cpu_warn0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
type = "passive";
};
-
- cpu_crit0: trip1 {
+ cpu_crit0: cpu_crit0 {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert0>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT 7>;
+ };
+ map1 {
+ trip = <&cpu_warn0>;
+ cooling-device = <&CPU0 8 THERMAL_NO_LIMIT>;
+ };
+ };
};
cpu-thermal1 {
@@ -357,18 +389,33 @@
thermal-sensors = <&tsens0 5>;
trips {
- cpu_alert1: trip0 {
+ cpu_alert1: cpu_alert1 {
temperature = <75000>;
hysteresis = <2000>;
+ type = "active";
+ };
+ cpu_warn1: cpu_warn1 {
+ temperature = <90000>;
+ hysteresis = <2000>;
type = "passive";
};
-
- cpu_crit1: trip1 {
+ cpu_crit1: cpu_crit1 {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert1>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT 7>;
+ };
+ map1 {
+ trip = <&cpu_warn1>;
+ cooling-device = <&CPU0 8 THERMAL_NO_LIMIT>;
+ };
+ };
};
cpu-thermal2 {
@@ -378,18 +425,32 @@
thermal-sensors = <&tsens0 8>;
trips {
- cpu_alert2: trip0 {
+ cpu_alert2: cpu_alert2 {
temperature = <75000>;
hysteresis = <2000>;
+ type = "active";
+ };
+ cpu_warn2: cpu_warn2 {
+ temperature = <90000>;
+ hysteresis = <2000>;
type = "passive";
};
-
- cpu_crit2: trip1 {
+ cpu_crit2: cpu_crit2 {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert2>;
+ cooling-device = <&CPU2 THERMAL_NO_LIMIT 7>;
+ };
+ map1 {
+ trip = <&cpu_warn2>;
+ cooling-device = <&CPU2 8 THERMAL_NO_LIMIT>;
+ };
+ };
};
cpu-thermal3 {
@@ -399,18 +460,33 @@
thermal-sensors = <&tsens0 10>;
trips {
- cpu_alert3: trip0 {
+ cpu_alert3: cpu_alert3 {
temperature = <75000>;
hysteresis = <2000>;
+ type = "active";
+ };
+ cpu_warn3: cpu_warn3 {
+ temperature = <90000>;
+ hysteresis = <2000>;
type = "passive";
};
-
cpu_crit3: trip1 {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert3>;
+ cooling-device = <&CPU2 THERMAL_NO_LIMIT 7>;
+ };
+ map1 {
+ trip = <&cpu_warn3>;
+ cooling-device = <&CPU2 8 THERMAL_NO_LIMIT>;
+ };
+ };
};
};
Add thermal mitigation configuration to msm8996. With the cpufreq-dt OPP table the CPU frequency may be scaled and therefore throttled by the thermal config. Signed-off-by: Ilia Lin <ilialin@codeaurora.org> --- arch/arm64/boot/dts/qcom/msm8996.dtsi | 98 +++++++++++++++++++++++++++++++---- 1 file changed, 87 insertions(+), 11 deletions(-)