@@ -125,11 +125,24 @@ __secondary_data:
*/
.text
__after_proc_init:
+#ifdef CONFIG_ARM_MPU
+M_CLASS(movw r12, #:lower16:BASEADDR_V7M_SCB)
+M_CLASS(movt r12, #:upper16:BASEADDR_V7M_SCB)
+M_CLASS(ldr r3, [r12, 0x50])
+AR_CLASS(mrc p15, 0, r3, c0, c1, 4) @ Read ID_MMFR0
+ and r3, r3, #(MMFR0_PMSA) @ PMSA field
+ teq r3, #(MMFR0_PMSAv7) @ PMSA v7
+#endif
#ifdef CONFIG_CPU_CP15
/*
* CP15 system control register value returned in r0 from
* the CPU init function.
*/
+
+#ifdef CONFIG_ARM_MPU
+ biceq r0, r0, #CR_BR @ Disable the 'default mem-map'
+ orreq r0, r0, #CR_M @ Set SCTRL.M (MPU on)
+#endif
#if defined(CONFIG_ALIGNMENT_TRAP) && __LINUX_ARM_ARCH__ < 6
orr r0, r0, #CR_A
#else
@@ -145,7 +158,15 @@ __after_proc_init:
bic r0, r0, #CR_I
#endif
mcr p15, 0, r0, c1, c0, 0 @ write control reg
+ isb
#elif defined (CONFIG_CPU_V7M)
+#ifdef CONFIG_ARM_MPU
+ ldreq r3, [r12, MPU_CTRL]
+ biceq r3, #MPU_CTRL_PRIVDEFENA
+ orreq r3, #MPU_CTRL_ENABLE
+ streq r3, [r12, MPU_CTRL]
+ isb
+#endif
/* For V7M systems we want to modify the CCR similarly to the SCTLR */
#ifdef CONFIG_CPU_DCACHE_DISABLE
bic r0, r0, #V7M_SCB_CCR_DC
@@ -156,9 +177,7 @@ __after_proc_init:
#ifdef CONFIG_CPU_ICACHE_DISABLE
bic r0, r0, #V7M_SCB_CCR_IC
#endif
- movw r3, #:lower16:(BASEADDR_V7M_SCB + V7M_SCB_CCR)
- movt r3, #:upper16:(BASEADDR_V7M_SCB + V7M_SCB_CCR)
- str r0, [r3]
+ str r0, [r12, V7M_SCB_CCR]
#endif /* CONFIG_CPU_CP15 elif CONFIG_CPU_V7M */
ret lr
ENDPROC(__after_proc_init)
@@ -282,19 +301,6 @@ M_CLASS(ldr r0, [r12, #MPU_TYPE])
setup_region r0, r5, r6, PMSAv7_INSTR_SIDE, r12 @ XIP_PHYS_ADDR, shared, enabled
3: isb
#endif
-
- /* Enable the MPU */
-AR_CLASS(mrc p15, 0, r0, c1, c0, 0) @ Read SCTLR
-AR_CLASS(bic r0, r0, #CR_BR) @ Disable the 'default mem-map'
-AR_CLASS(orr r0, r0, #CR_M) @ Set SCTRL.M (MPU on)
-AR_CLASS(mcr p15, 0, r0, c1, c0, 0) @ Enable MPU
-
-M_CLASS(ldr r0, [r12, #MPU_CTRL])
-M_CLASS(bic r0, #MPU_CTRL_PRIVDEFENA)
-M_CLASS(orr r0, #MPU_CTRL_ENABLE)
-M_CLASS(str r0, [r12, #MPU_CTRL])
- isb
-
ret lr
ENDPROC(__setup_pmsa_v7)
@@ -352,13 +358,6 @@ ENTRY(__secondary_setup_pmsa_v7)
cmp r4, #0
bgt 1b
- /* Enable the MPU */
- mrc p15, 0, r0, c1, c0, 0 @ Read SCTLR
- bic r0, r0, #CR_BR @ Disable the 'default mem-map'
- orr r0, r0, #CR_M @ Set SCTRL.M (MPU on)
- mcr p15, 0, r0, c1, c0, 0 @ Enable MPU
- isb
-
ret lr
ENDPROC(__secondary_setup_pmsa_v7)
This patch postpone MPU activation till __after_proc_init (which is placed in .text section) rather than doing it in __setup_mpu. It allows us ignore used-only-once .head.text section while programming PMSAv8 MPU (for PMSAv7 it stays covered anyway). Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> --- arch/arm/kernel/head-nommu.S | 45 ++++++++++++++++++++++---------------------- 1 file changed, 22 insertions(+), 23 deletions(-)