diff mbox

ARM: dts: imx6ul: remove unnecessary clocks for cpu-freq

Message ID 1514978534-27416-1-git-send-email-Anson.Huang@nxp.com (mailing list archive)
State New, archived
Headers show

Commit Message

Anson Huang Jan. 3, 2018, 11:22 a.m. UTC 
Remove unnecessary clocks for cpu-freq driver to
avoid confusion.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
 arch/arm/boot/dts/imx6ul.dtsi | 9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)

Comments

Fabio Estevam Jan. 4, 2018, 1 p.m. UTC | #1 
On Wed, Jan 3, 2018 at 9:22 AM, Anson Huang <Anson.Huang@nxp.com> wrote:
> Remove unnecessary clocks for cpu-freq driver to
> avoid confusion.
>
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>

Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Dong Aisheng Jan. 8, 2018, 10:42 a.m. UTC | #2 
On Wed, Jan 03, 2018 at 07:22:14PM +0800, Anson Huang wrote:
> Remove unnecessary clocks for cpu-freq driver to
> avoid confusion.
> 
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>

Acked-by: Dong Aisheng <aisheng.dong@nxp.com>

Regards
Dong Aisheng
Shawn Guo Jan. 29, 2018, 8:20 a.m. UTC | #3 
On Wed, Jan 03, 2018 at 07:22:14PM +0800, Anson Huang wrote:
> Remove unnecessary clocks for cpu-freq driver to
> avoid confusion.
> 
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>

Applied, thanks.
diff mbox

Patch

diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index 86b3251..fb06a9a 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -86,15 +86,10 @@ 
 				 <&clks IMX6UL_CA7_SECONDARY_SEL>,
 				 <&clks IMX6UL_CLK_STEP>,
 				 <&clks IMX6UL_CLK_PLL1_SW>,
-				 <&clks IMX6UL_CLK_PLL1_SYS>,
-				 <&clks IMX6UL_PLL1_BYPASS>,
-				 <&clks IMX6UL_CLK_PLL1>,
-				 <&clks IMX6UL_PLL1_BYPASS_SRC>,
-				 <&clks IMX6UL_CLK_OSC>;
+				 <&clks IMX6UL_CLK_PLL1_SYS>;
 			clock-names = "arm", "pll2_bus",  "pll2_pfd2_396m",
 				      "secondary_sel", "step", "pll1_sw",
-				      "pll1_sys", "pll1_bypass", "pll1",
-				      "pll1_bypass_src", "osc";
+				      "pll1_sys";
 			arm-supply = <&reg_arm>;
 			soc-supply = <&reg_soc>;
 		};