@@ -8,29 +8,35 @@
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
+#include <linux/clk-provider.h>
+#include <linux/clk.h>
+#include <linux/clk/davinci.h>
+#include <linux/clkdev.h>
#include <linux/dma-mapping.h>
#include <linux/dmaengine.h>
#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/serial_8250.h>
-#include <linux/platform_device.h>
#include <linux/platform_data/edma.h>
#include <linux/platform_data/gpio-davinci.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
#include <asm/mach/map.h>
+#include <mach/common.h>
#include <mach/cputype.h>
#include <mach/irqs.h>
-#include "psc.h"
#include <mach/mux.h>
-#include <mach/time.h>
#include <mach/serial.h>
-#include <mach/common.h>
+#include <mach/time.h>
+#include "asp.h"
#include "davinci.h"
-#include "clock.h"
#include "mux.h"
-#include "asp.h"
+
+#ifndef CONFIG_COMMON_CLK
+#include "clock.h"
+#include "psc.h"
+#endif
#define DAVINCI_VPIF_BASE (0x01C12000)
@@ -46,6 +52,7 @@
#define DM646X_EMAC_CNTRL_RAM_OFFSET 0x2000
#define DM646X_EMAC_CNTRL_RAM_SIZE 0x2000
+#ifndef CONFIG_COMMON_CLK
static struct pll_data pll1_data = {
.num = 1,
.phys_base = DAVINCI_PLL1_BASE,
@@ -356,6 +363,7 @@ static struct clk_lookup dm646x_clks[] = {
CLK(NULL, "vpif1", &vpif1_clk),
CLK(NULL, NULL, NULL),
};
+#endif
static struct emac_platform_data dm646x_emac_pdata = {
.ctrl_reg_offset = DM646X_EMAC_CNTRL_OFFSET,
@@ -953,9 +961,26 @@ void __init dm646x_init(void)
void __init dm646x_init_time(unsigned long ref_clk_rate,
unsigned long aux_clkin_rate)
{
+#ifdef CONFIG_COMMON_CLK
+ void __iomem *pll1, *pll2, *psc;
+ struct clk *clk;
+
+ pll1 = ioremap(DAVINCI_PLL1_BASE, SZ_4K);
+ pll2 = ioremap(DAVINCI_PLL2_BASE, SZ_4K);
+ psc = ioremap(DAVINCI_PWR_SLEEP_CNTRL_BASE, SZ_4K);
+
+ clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, ref_clk_rate);
+ clk_register_fixed_rate(NULL, "aux_clkin", NULL, 0, aux_clkin_rate);
+ dm646x_pll_clk_init(pll1, pll2);
+ dm646x_psc_clk_init(psc);
+ /* no LPSC, always enabled; c.f. spruep9a */
+ clk = clk_register_fixed_factor(NULL, "timer2", "pll1_sysclk3", 0, 1, 1);
+ clk_register_clkdev(clk, NULL, "davinci-wdt");
+#else
ref_clk.rate = ref_clk_rate;
aux_clkin.rate = aux_clkin_rate;
davinci_clk_init(dm646x_clks);
+#endif
davinci_timer_init();
}
This adds the new board-specfic clock init in mach-davinci/dm646x.c using the new common clock framework drivers. The #ifdefs are needed to prevent compile errors until the entire ARCH_DAVINCI is converted. Also clean up the #includes since we are adding some here. Signed-off-by: David Lechner <david@lechnology.com> --- arch/arm/mach-davinci/dm646x.c | 41 +++++++++++++++++++++++++++++++++-------- 1 file changed, 33 insertions(+), 8 deletions(-)