| Message ID | 1515486632-18488-1-git-send-email-ping.bai@nxp.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Jacky, > -----Original Message----- > From: Jacky Bai > Sent: Tuesday, January 09, 2018 4:31 PM > To: shawnguo@kernel.org; kernel@pengutronix.de; Fabio Estevam > <fabio.estevam@nxp.com> > Cc: linux-arm-kernel@lists.infradead.org; dl-linux-imx <linux-imx@nxp.com>; > A.s. Dong <aisheng.dong@nxp.com>; jacky.baip@gmail.com > Subject: [PATCH] ARM: imx: Improve the soc revision calculation flow > > On our i.MX6 SOC, the DIGPROG register is used for representing the SOC ID > and silicon revision. The revision has two part: MAJOR and MINOR. each is > represented in 8 bits in the register. > > bits [15:8]: reflect the MAJOR part of the revision; bits [7:0]: reflect the MINOR > part of the revision; > > In our linux kernel, the soc revision is represented in 8 bits. > MAJOR part and MINOR each occupy 4 bits. > > previous method does NOT take care about the MAJOR part in DIGPROG > register. So reformat the revision read from the HW to be compatible with the > revision format used in kernel. > It would be better if there's more clarification on the real effect of this patch in commit message. e.g. what real issue it could be if without this patch? I guess it would show rev over 2.x correctly, right? BTW, since this patch totally remove the using of already defined rev macros, I wonder if it's a good idea. Just a thought, how about do something like mx3 which keeps using the macros? static struct { u8 srev; const char *name; unsigned int rev; } mx31_cpu_type[] = { { .srev = 0x00, .name = "i.MX31(L)", .rev = IMX_CHIP_REVISION_1_0 }, { .srev = 0x10, .name = "i.MX31", .rev = IMX_CHIP_REVISION_1_1 }, { .srev = 0x11, .name = "i.MX31L", .rev = IMX_CHIP_REVISION_1_1 }, { .srev = 0x12, .name = "i.MX31", .rev = IMX_CHIP_REVISION_1_1 }, { .srev = 0x13, .name = "i.MX31L", .rev = IMX_CHIP_REVISION_1_1 }, { .srev = 0x14, .name = "i.MX31", .rev = IMX_CHIP_REVISION_1_2 }, { .srev = 0x15, .name = "i.MX31L", .rev = IMX_CHIP_REVISION_1_2 }, { .srev = 0x28, .name = "i.MX31", .rev = IMX_CHIP_REVISION_2_0 }, { .srev = 0x29, .name = "i.MX31L", .rev = IMX_CHIP_REVISION_2_0 }, }; static int mx31_read_cpu_rev(void) Regards Dong Aisheng > Signed-off-by: Bai Ping <ping.bai@nxp.com> > --- > arch/arm/mach-imx/anatop.c | 58 +++++++++++++++++-------------------------- > --- > 1 file changed, 21 insertions(+), 37 deletions(-) > > diff --git a/arch/arm/mach-imx/anatop.c b/arch/arm/mach-imx/anatop.c index > 649a84c..170cb30 100644 > --- a/arch/arm/mach-imx/anatop.c > +++ b/arch/arm/mach-imx/anatop.c > @@ -1,5 +1,6 @@ > /* > * Copyright (C) 2013-2015 Freescale Semiconductor, Inc. > + * Copyright NXP 2017. > * > * The code contained herein is licensed under the GNU General Public > * License. You may obtain a copy of the GNU General Public License @@ - > 116,6 +117,8 @@ void __init imx_init_revision_from_anatop(void) > unsigned int revision; > u32 digprog; > u16 offset = ANADIG_DIGPROG; > + u16 major_part, minor_part; > + > > np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop"); > anatop_base = of_iomap(np, 0); > @@ -127,45 +130,26 @@ void __init imx_init_revision_from_anatop(void) > digprog = readl_relaxed(anatop_base + offset); > iounmap(anatop_base); > > - switch (digprog & 0xff) { > - case 0: > - /* > - * For i.MX6QP, most of the code for i.MX6Q can be resued, > - * so internally, we identify it as i.MX6Q Rev 2.0 > - */ > - if (digprog >> 8 & 0x01) > - revision = IMX_CHIP_REVISION_2_0; > - else > - revision = IMX_CHIP_REVISION_1_0; > - break; > - case 1: > - revision = IMX_CHIP_REVISION_1_1; > - break; > - case 2: > - revision = IMX_CHIP_REVISION_1_2; > - break; > - case 3: > - revision = IMX_CHIP_REVISION_1_3; > - break; > - case 4: > - revision = IMX_CHIP_REVISION_1_4; > - break; > - case 5: > - /* > - * i.MX6DQ TO1.5 is defined as Rev 1.3 in Data Sheet, marked > - * as 'D' in Part Number last character. > - */ > - revision = IMX_CHIP_REVISION_1_5; > - break; > - default: > - /* > - * Fail back to return raw register value instead of 0xff. > - * It will be easy to know version information in SOC if it > - * can't be recognized by known version. And some chip's > (i.MX7D) > - * digprog value match linux version format, so it needn't map > - * again and we can use register value directly. > + /* > + * On i.MX7D digprog value match linux version format, so > + * it needn't map again and we can use register value directly. > + */ > + if (of_device_is_compatible(np, "fsl,imx7d-anatop")) { > + revision = digprog & 0xff; > + } else { > + > + /* MAJOR: [15:8], the major silicon revison; > + * MINOR: [7: 0], the minor silicon revison; > + * > + * please refer to the i.MX RM for the detailed > + * silicon revison bit define. > + * format the major part and minor part to match the > + * linux kernel soc version format. > */ > revision = digprog & 0xff; > + major_part = (digprog >> 8) & 0xf; > + minor_part = digprog & 0xf; > + revision = ((major_part + 1) << 4) | minor_part; > } > > mxc_set_cpu_type(digprog >> 16 & 0xff); > -- > 1.9.1
> -----Original Message----- > From: A.s. Dong > Sent: 2018年1月9日 18:59 > To: Jacky Bai <ping.bai@nxp.com>; shawnguo@kernel.org; > kernel@pengutronix.de; Fabio Estevam <fabio.estevam@nxp.com> > Cc: linux-arm-kernel@lists.infradead.org; dl-linux-imx <linux-imx@nxp.com>; > jacky.baip@gmail.com > Subject: RE: [PATCH] ARM: imx: Improve the soc revision calculation flow > > Hi Jacky, > > > -----Original Message----- > > From: Jacky Bai > > Sent: Tuesday, January 09, 2018 4:31 PM > > To: shawnguo@kernel.org; kernel@pengutronix.de; Fabio Estevam > > <fabio.estevam@nxp.com> > > Cc: linux-arm-kernel@lists.infradead.org; dl-linux-imx > > <linux-imx@nxp.com>; A.s. Dong <aisheng.dong@nxp.com>; > > jacky.baip@gmail.com > > Subject: [PATCH] ARM: imx: Improve the soc revision calculation flow > > > > On our i.MX6 SOC, the DIGPROG register is used for representing the > > SOC ID and silicon revision. The revision has two part: MAJOR and > > MINOR. each is represented in 8 bits in the register. > > > > bits [15:8]: reflect the MAJOR part of the revision; bits [7:0]: > > reflect the MINOR part of the revision; > > > > In our linux kernel, the soc revision is represented in 8 bits. > > MAJOR part and MINOR each occupy 4 bits. > > > > previous method does NOT take care about the MAJOR part in DIGPROG > > register. So reformat the revision read from the HW to be compatible > > with the revision format used in kernel. > > > > It would be better if there's more clarification on the real effect of this patch in > commit message. > e.g. what real issue it could be if without this patch? > > I guess it would show rev over 2.x correctly, right? Yes, this patch is mainly for fix the >= 2.1 revision issue we meet on QP. > > BTW, since this patch totally remove the using of already defined rev macros, I > wonder if it's a good idea. > > Just a thought, how about do something like mx3 which keeps using the macros? > As anatop module is common for all i.MX 6SL, SLL, Solo, DL, DQ, DQP and 7D, If we use the way like mx3, Maybe we need to add many static struct to cover all the above platform? BR Jacky Bai > static struct { > u8 srev; > const char *name; > unsigned int rev; > } mx31_cpu_type[] = { > { .srev = 0x00, .name = "i.MX31(L)", .rev = IMX_CHIP_REVISION_1_0 }, > { .srev = 0x10, .name = "i.MX31", .rev = > IMX_CHIP_REVISION_1_1 }, > { .srev = 0x11, .name = "i.MX31L", .rev = > IMX_CHIP_REVISION_1_1 }, > { .srev = 0x12, .name = "i.MX31", .rev = > IMX_CHIP_REVISION_1_1 }, > { .srev = 0x13, .name = "i.MX31L", .rev = > IMX_CHIP_REVISION_1_1 }, > { .srev = 0x14, .name = "i.MX31", .rev = > IMX_CHIP_REVISION_1_2 }, > { .srev = 0x15, .name = "i.MX31L", .rev = > IMX_CHIP_REVISION_1_2 }, > { .srev = 0x28, .name = "i.MX31", .rev = > IMX_CHIP_REVISION_2_0 }, > { .srev = 0x29, .name = "i.MX31L", .rev = > IMX_CHIP_REVISION_2_0 }, > }; > static int mx31_read_cpu_rev(void) > > Regards > Dong Aisheng > > > > Signed-off-by: Bai Ping <ping.bai@nxp.com> > > --- > > arch/arm/mach-imx/anatop.c | 58 > > +++++++++++++++++-------------------------- > > --- > > 1 file changed, 21 insertions(+), 37 deletions(-) > > > > diff --git a/arch/arm/mach-imx/anatop.c b/arch/arm/mach-imx/anatop.c > > index > > 649a84c..170cb30 100644 > > --- a/arch/arm/mach-imx/anatop.c > > +++ b/arch/arm/mach-imx/anatop.c > > @@ -1,5 +1,6 @@ > > /* > > * Copyright (C) 2013-2015 Freescale Semiconductor, Inc. > > + * Copyright NXP 2017. > > * > > * The code contained herein is licensed under the GNU General Public > > * License. You may obtain a copy of the GNU General Public License > > @@ - > > 116,6 +117,8 @@ void __init imx_init_revision_from_anatop(void) > > unsigned int revision; > > u32 digprog; > > u16 offset = ANADIG_DIGPROG; > > + u16 major_part, minor_part; > > + > > > > np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop"); > > anatop_base = of_iomap(np, 0); > > @@ -127,45 +130,26 @@ void __init imx_init_revision_from_anatop(void) > > digprog = readl_relaxed(anatop_base + offset); > > iounmap(anatop_base); > > > > - switch (digprog & 0xff) { > > - case 0: > > - /* > > - * For i.MX6QP, most of the code for i.MX6Q can be resued, > > - * so internally, we identify it as i.MX6Q Rev 2.0 > > - */ > > - if (digprog >> 8 & 0x01) > > - revision = IMX_CHIP_REVISION_2_0; > > - else > > - revision = IMX_CHIP_REVISION_1_0; > > - break; > > - case 1: > > - revision = IMX_CHIP_REVISION_1_1; > > - break; > > - case 2: > > - revision = IMX_CHIP_REVISION_1_2; > > - break; > > - case 3: > > - revision = IMX_CHIP_REVISION_1_3; > > - break; > > - case 4: > > - revision = IMX_CHIP_REVISION_1_4; > > - break; > > - case 5: > > - /* > > - * i.MX6DQ TO1.5 is defined as Rev 1.3 in Data Sheet, marked > > - * as 'D' in Part Number last character. > > - */ > > - revision = IMX_CHIP_REVISION_1_5; > > - break; > > - default: > > - /* > > - * Fail back to return raw register value instead of 0xff. > > - * It will be easy to know version information in SOC if it > > - * can't be recognized by known version. And some chip's > > (i.MX7D) > > - * digprog value match linux version format, so it needn't map > > - * again and we can use register value directly. > > + /* > > + * On i.MX7D digprog value match linux version format, so > > + * it needn't map again and we can use register value directly. > > + */ > > + if (of_device_is_compatible(np, "fsl,imx7d-anatop")) { > > + revision = digprog & 0xff; > > + } else { > > + > > + /* MAJOR: [15:8], the major silicon revison; > > + * MINOR: [7: 0], the minor silicon revison; > > + * > > + * please refer to the i.MX RM for the detailed > > + * silicon revison bit define. > > + * format the major part and minor part to match the > > + * linux kernel soc version format. > > */ > > revision = digprog & 0xff; > > + major_part = (digprog >> 8) & 0xf; > > + minor_part = digprog & 0xf; > > + revision = ((major_part + 1) << 4) | minor_part; > > } > > > > mxc_set_cpu_type(digprog >> 16 & 0xff); > > -- > > 1.9.1
> -----Original Message----- > From: Jacky Bai > Sent: Tuesday, January 09, 2018 7:07 PM > To: A.s. Dong <aisheng.dong@nxp.com>; shawnguo@kernel.org; > kernel@pengutronix.de; Fabio Estevam <fabio.estevam@nxp.com> > Cc: linux-arm-kernel@lists.infradead.org; dl-linux-imx <linux-imx@nxp.com>; > jacky.baip@gmail.com > Subject: RE: [PATCH] ARM: imx: Improve the soc revision calculation flow > > > > > -----Original Message----- > > From: A.s. Dong > > Sent: 2018年1月9日 18:59 > > To: Jacky Bai <ping.bai@nxp.com>; shawnguo@kernel.org; > > kernel@pengutronix.de; Fabio Estevam <fabio.estevam@nxp.com> > > Cc: linux-arm-kernel@lists.infradead.org; dl-linux-imx > > <linux-imx@nxp.com>; jacky.baip@gmail.com > > Subject: RE: [PATCH] ARM: imx: Improve the soc revision calculation > > flow > > > > Hi Jacky, > > > > > -----Original Message----- > > > From: Jacky Bai > > > Sent: Tuesday, January 09, 2018 4:31 PM > > > To: shawnguo@kernel.org; kernel@pengutronix.de; Fabio Estevam > > > <fabio.estevam@nxp.com> > > > Cc: linux-arm-kernel@lists.infradead.org; dl-linux-imx > > > <linux-imx@nxp.com>; A.s. Dong <aisheng.dong@nxp.com>; > > > jacky.baip@gmail.com > > > Subject: [PATCH] ARM: imx: Improve the soc revision calculation flow > > > > > > On our i.MX6 SOC, the DIGPROG register is used for representing the > > > SOC ID and silicon revision. The revision has two part: MAJOR and > > > MINOR. each is represented in 8 bits in the register. > > > > > > bits [15:8]: reflect the MAJOR part of the revision; bits [7:0]: > > > reflect the MINOR part of the revision; > > > > > > In our linux kernel, the soc revision is represented in 8 bits. > > > MAJOR part and MINOR each occupy 4 bits. > > > > > > previous method does NOT take care about the MAJOR part in DIGPROG > > > register. So reformat the revision read from the HW to be compatible > > > with the revision format used in kernel. > > > > > > > It would be better if there's more clarification on the real effect of > > this patch in commit message. > > e.g. what real issue it could be if without this patch? > > > > I guess it would show rev over 2.x correctly, right? > > > Yes, this patch is mainly for fix the >= 2.1 revision issue we meet on QP. > > > > > BTW, since this patch totally remove the using of already defined rev > > macros, I wonder if it's a good idea. > > > > Just a thought, how about do something like mx3 which keeps using the > macros? > > > > As anatop module is common for all i.MX 6SL, SLL, Solo, DL, DQ, DQP and 7D, If > we use the way like mx3, Maybe we need to add many static struct to cover all > the above platform? Yes, as the data you used actually are according to rev macros. So a bit strange not use. Shawn, Or what your suggestion? Regards Dong Aisheng > > BR > Jacky Bai > > static struct { > > u8 srev; > > const char *name; > > unsigned int rev; > > } mx31_cpu_type[] = { > > { .srev = 0x00, .name = "i.MX31(L)", .rev = IMX_CHIP_REVISION_1_0 }, > > { .srev = 0x10, .name = "i.MX31", .rev = > > IMX_CHIP_REVISION_1_1 }, > > { .srev = 0x11, .name = "i.MX31L", .rev = > > IMX_CHIP_REVISION_1_1 }, > > { .srev = 0x12, .name = "i.MX31", .rev = > > IMX_CHIP_REVISION_1_1 }, > > { .srev = 0x13, .name = "i.MX31L", .rev = > > IMX_CHIP_REVISION_1_1 }, > > { .srev = 0x14, .name = "i.MX31", .rev = > > IMX_CHIP_REVISION_1_2 }, > > { .srev = 0x15, .name = "i.MX31L", .rev = > > IMX_CHIP_REVISION_1_2 }, > > { .srev = 0x28, .name = "i.MX31", .rev = > > IMX_CHIP_REVISION_2_0 }, > > { .srev = 0x29, .name = "i.MX31L", .rev = > > IMX_CHIP_REVISION_2_0 }, > > }; > > static int mx31_read_cpu_rev(void) > > > > Regards > > Dong Aisheng > > > > > > > Signed-off-by: Bai Ping <ping.bai@nxp.com> > > > --- > > > arch/arm/mach-imx/anatop.c | 58 > > > +++++++++++++++++-------------------------- > > > --- > > > 1 file changed, 21 insertions(+), 37 deletions(-) > > > > > > diff --git a/arch/arm/mach-imx/anatop.c b/arch/arm/mach-imx/anatop.c > > > index > > > 649a84c..170cb30 100644 > > > --- a/arch/arm/mach-imx/anatop.c > > > +++ b/arch/arm/mach-imx/anatop.c > > > @@ -1,5 +1,6 @@ > > > /* > > > * Copyright (C) 2013-2015 Freescale Semiconductor, Inc. > > > + * Copyright NXP 2017. > > > * > > > * The code contained herein is licensed under the GNU General Public > > > * License. You may obtain a copy of the GNU General Public License > > > @@ - > > > 116,6 +117,8 @@ void __init imx_init_revision_from_anatop(void) > > > unsigned int revision; > > > u32 digprog; > > > u16 offset = ANADIG_DIGPROG; > > > + u16 major_part, minor_part; > > > + > > > > > > np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop"); > > > anatop_base = of_iomap(np, 0); > > > @@ -127,45 +130,26 @@ void __init imx_init_revision_from_anatop(void) > > > digprog = readl_relaxed(anatop_base + offset); > > > iounmap(anatop_base); > > > > > > - switch (digprog & 0xff) { > > > - case 0: > > > - /* > > > - * For i.MX6QP, most of the code for i.MX6Q can be resued, > > > - * so internally, we identify it as i.MX6Q Rev 2.0 > > > - */ > > > - if (digprog >> 8 & 0x01) > > > - revision = IMX_CHIP_REVISION_2_0; > > > - else > > > - revision = IMX_CHIP_REVISION_1_0; > > > - break; > > > - case 1: > > > - revision = IMX_CHIP_REVISION_1_1; > > > - break; > > > - case 2: > > > - revision = IMX_CHIP_REVISION_1_2; > > > - break; > > > - case 3: > > > - revision = IMX_CHIP_REVISION_1_3; > > > - break; > > > - case 4: > > > - revision = IMX_CHIP_REVISION_1_4; > > > - break; > > > - case 5: > > > - /* > > > - * i.MX6DQ TO1.5 is defined as Rev 1.3 in Data Sheet, marked > > > - * as 'D' in Part Number last character. > > > - */ > > > - revision = IMX_CHIP_REVISION_1_5; > > > - break; > > > - default: > > > - /* > > > - * Fail back to return raw register value instead of 0xff. > > > - * It will be easy to know version information in SOC if it > > > - * can't be recognized by known version. And some chip's > > > (i.MX7D) > > > - * digprog value match linux version format, so it needn't map > > > - * again and we can use register value directly. > > > + /* > > > + * On i.MX7D digprog value match linux version format, so > > > + * it needn't map again and we can use register value directly. > > > + */ > > > + if (of_device_is_compatible(np, "fsl,imx7d-anatop")) { > > > + revision = digprog & 0xff; > > > + } else { > > > + > > > + /* MAJOR: [15:8], the major silicon revison; > > > + * MINOR: [7: 0], the minor silicon revison; > > > + * > > > + * please refer to the i.MX RM for the detailed > > > + * silicon revison bit define. > > > + * format the major part and minor part to match the > > > + * linux kernel soc version format. > > > */ > > > revision = digprog & 0xff; > > > + major_part = (digprog >> 8) & 0xf; > > > + minor_part = digprog & 0xf; > > > + revision = ((major_part + 1) << 4) | minor_part; > > > } > > > > > > mxc_set_cpu_type(digprog >> 16 & 0xff); > > > -- > > > 1.9.1
> -----Original Message----- > From: Jacky Bai > Sent: Tuesday, January 09, 2018 4:31 PM > To: shawnguo@kernel.org; kernel@pengutronix.de; Fabio Estevam > <fabio.estevam@nxp.com> > Cc: linux-arm-kernel@lists.infradead.org; dl-linux-imx <linux-imx@nxp.com>; > A.s. Dong <aisheng.dong@nxp.com>; jacky.baip@gmail.com > Subject: [PATCH] ARM: imx: Improve the soc revision calculation flow > > On our i.MX6 SOC, the DIGPROG register is used for representing the SOC ID > and silicon revision. The revision has two part: MAJOR and MINOR. each is > represented in 8 bits in the register. > > bits [15:8]: reflect the MAJOR part of the revision; bits [7:0]: reflect the MINOR > part of the revision; > > In our linux kernel, the soc revision is represented in 8 bits. > MAJOR part and MINOR each occupy 4 bits. > > previous method does NOT take care about the MAJOR part in DIGPROG > register. So reformat the revision read from the HW to be compatible with the > revision format used in kernel. > > Signed-off-by: Bai Ping <ping.bai@nxp.com> > --- > arch/arm/mach-imx/anatop.c | 58 +++++++++++++++++-------------------------- > --- > 1 file changed, 21 insertions(+), 37 deletions(-) > > diff --git a/arch/arm/mach-imx/anatop.c b/arch/arm/mach-imx/anatop.c index > 649a84c..170cb30 100644 > --- a/arch/arm/mach-imx/anatop.c > +++ b/arch/arm/mach-imx/anatop.c > @@ -1,5 +1,6 @@ > /* > * Copyright (C) 2013-2015 Freescale Semiconductor, Inc. > + * Copyright NXP 2017. Copyright 2017-2018 NXP ? > * > * The code contained herein is licensed under the GNU General Public > * License. You may obtain a copy of the GNU General Public License @@ - > 116,6 +117,8 @@ void __init imx_init_revision_from_anatop(void) > unsigned int revision; > u32 digprog; > u16 offset = ANADIG_DIGPROG; > + u16 major_part, minor_part; U8? > + > > np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop"); > anatop_base = of_iomap(np, 0); > @@ -127,45 +130,26 @@ void __init imx_init_revision_from_anatop(void) > digprog = readl_relaxed(anatop_base + offset); > iounmap(anatop_base); > > - switch (digprog & 0xff) { > - case 0: > - /* > - * For i.MX6QP, most of the code for i.MX6Q can be resued, > - * so internally, we identify it as i.MX6Q Rev 2.0 > - */ > - if (digprog >> 8 & 0x01) > - revision = IMX_CHIP_REVISION_2_0; > - else > - revision = IMX_CHIP_REVISION_1_0; > - break; > - case 1: > - revision = IMX_CHIP_REVISION_1_1; > - break; > - case 2: > - revision = IMX_CHIP_REVISION_1_2; > - break; > - case 3: > - revision = IMX_CHIP_REVISION_1_3; > - break; > - case 4: > - revision = IMX_CHIP_REVISION_1_4; > - break; > - case 5: > - /* > - * i.MX6DQ TO1.5 is defined as Rev 1.3 in Data Sheet, marked > - * as 'D' in Part Number last character. > - */ > - revision = IMX_CHIP_REVISION_1_5; > - break; > - default: > - /* > - * Fail back to return raw register value instead of 0xff. > - * It will be easy to know version information in SOC if it > - * can't be recognized by known version. And some chip's > (i.MX7D) > - * digprog value match linux version format, so it needn't map > - * again and we can use register value directly. > + /* > + * On i.MX7D digprog value match linux version format, so > + * it needn't map again and we can use register value directly. > + */ > + if (of_device_is_compatible(np, "fsl,imx7d-anatop")) { > + revision = digprog & 0xff; > + } else { > + > + /* MAJOR: [15:8], the major silicon revison; > + * MINOR: [7: 0], the minor silicon revison; > + * > + * please refer to the i.MX RM for the detailed > + * silicon revison bit define. > + * format the major part and minor part to match the > + * linux kernel soc version format. > */ > revision = digprog & 0xff; Unneeded line? Otherwise: Acked-by: Dong Aisheng <aisheng.dong@nxp.com> Regards Dong Aisheng > + major_part = (digprog >> 8) & 0xf; > + minor_part = digprog & 0xf; > + revision = ((major_part + 1) << 4) | minor_part; > } > > mxc_set_cpu_type(digprog >> 16 & 0xff); > -- > 1.9.1
On Fri, Jan 26, 2018 at 07:59:46AM +0000, A.s. Dong wrote: > > @@ -127,45 +130,26 @@ void __init imx_init_revision_from_anatop(void) > > digprog = readl_relaxed(anatop_base + offset); > > iounmap(anatop_base); > > > > - switch (digprog & 0xff) { > > - case 0: > > - /* > > - * For i.MX6QP, most of the code for i.MX6Q can be resued, > > - * so internally, we identify it as i.MX6Q Rev 2.0 > > - */ > > - if (digprog >> 8 & 0x01) > > - revision = IMX_CHIP_REVISION_2_0; > > - else > > - revision = IMX_CHIP_REVISION_1_0; > > - break; > > - case 1: > > - revision = IMX_CHIP_REVISION_1_1; > > - break; > > - case 2: > > - revision = IMX_CHIP_REVISION_1_2; > > - break; > > - case 3: > > - revision = IMX_CHIP_REVISION_1_3; > > - break; > > - case 4: > > - revision = IMX_CHIP_REVISION_1_4; > > - break; > > - case 5: > > - /* > > - * i.MX6DQ TO1.5 is defined as Rev 1.3 in Data Sheet, marked > > - * as 'D' in Part Number last character. > > - */ > > - revision = IMX_CHIP_REVISION_1_5; > > - break; > > - default: > > - /* > > - * Fail back to return raw register value instead of 0xff. > > - * It will be easy to know version information in SOC if it > > - * can't be recognized by known version. And some chip's > > (i.MX7D) > > - * digprog value match linux version format, so it needn't map > > - * again and we can use register value directly. > > + /* > > + * On i.MX7D digprog value match linux version format, so > > + * it needn't map again and we can use register value directly. > > + */ > > + if (of_device_is_compatible(np, "fsl,imx7d-anatop")) { > > + revision = digprog & 0xff; > > + } else { > > + > > + /* MAJOR: [15:8], the major silicon revison; > > + * MINOR: [7: 0], the minor silicon revison; > > + * > > + * please refer to the i.MX RM for the detailed > > + * silicon revison bit define. > > + * format the major part and minor part to match the > > + * linux kernel soc version format. > > */ > > revision = digprog & 0xff; > > Unneeded line? +1 Shawn
Thanks shawn and Aisheng for review. Will fix in V2. BR Jacky Bai > Subject: Re: [PATCH] ARM: imx: Improve the soc revision calculation flow > > On Fri, Jan 26, 2018 at 07:59:46AM +0000, A.s. Dong wrote: > > > @@ -127,45 +130,26 @@ void __init imx_init_revision_from_anatop(void) > > > digprog = readl_relaxed(anatop_base + offset); > > > iounmap(anatop_base); > > > > > > - switch (digprog & 0xff) { > > > - case 0: > > > - /* > > > - * For i.MX6QP, most of the code for i.MX6Q can be resued, > > > - * so internally, we identify it as i.MX6Q Rev 2.0 > > > - */ > > > - if (digprog >> 8 & 0x01) > > > - revision = IMX_CHIP_REVISION_2_0; > > > - else > > > - revision = IMX_CHIP_REVISION_1_0; > > > - break; > > > - case 1: > > > - revision = IMX_CHIP_REVISION_1_1; > > > - break; > > > - case 2: > > > - revision = IMX_CHIP_REVISION_1_2; > > > - break; > > > - case 3: > > > - revision = IMX_CHIP_REVISION_1_3; > > > - break; > > > - case 4: > > > - revision = IMX_CHIP_REVISION_1_4; > > > - break; > > > - case 5: > > > - /* > > > - * i.MX6DQ TO1.5 is defined as Rev 1.3 in Data Sheet, marked > > > - * as 'D' in Part Number last character. > > > - */ > > > - revision = IMX_CHIP_REVISION_1_5; > > > - break; > > > - default: > > > - /* > > > - * Fail back to return raw register value instead of 0xff. > > > - * It will be easy to know version information in SOC if it > > > - * can't be recognized by known version. And some chip's > > > (i.MX7D) > > > - * digprog value match linux version format, so it needn't map > > > - * again and we can use register value directly. > > > + /* > > > + * On i.MX7D digprog value match linux version format, so > > > + * it needn't map again and we can use register value directly. > > > + */ > > > + if (of_device_is_compatible(np, "fsl,imx7d-anatop")) { > > > + revision = digprog & 0xff; > > > + } else { > > > + > > > + /* MAJOR: [15:8], the major silicon revison; > > > + * MINOR: [7: 0], the minor silicon revison; > > > + * > > > + * please refer to the i.MX RM for the detailed > > > + * silicon revison bit define. > > > + * format the major part and minor part to match the > > > + * linux kernel soc version format. > > > */ > > > revision = digprog & 0xff; > > > > Unneeded line? > > +1 > > Shawn
diff --git a/arch/arm/mach-imx/anatop.c b/arch/arm/mach-imx/anatop.c index 649a84c..170cb30 100644 --- a/arch/arm/mach-imx/anatop.c +++ b/arch/arm/mach-imx/anatop.c @@ -1,5 +1,6 @@ /* * Copyright (C) 2013-2015 Freescale Semiconductor, Inc. + * Copyright NXP 2017. * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License @@ -116,6 +117,8 @@ void __init imx_init_revision_from_anatop(void) unsigned int revision; u32 digprog; u16 offset = ANADIG_DIGPROG; + u16 major_part, minor_part; + np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop"); anatop_base = of_iomap(np, 0); @@ -127,45 +130,26 @@ void __init imx_init_revision_from_anatop(void) digprog = readl_relaxed(anatop_base + offset); iounmap(anatop_base); - switch (digprog & 0xff) { - case 0: - /* - * For i.MX6QP, most of the code for i.MX6Q can be resued, - * so internally, we identify it as i.MX6Q Rev 2.0 - */ - if (digprog >> 8 & 0x01) - revision = IMX_CHIP_REVISION_2_0; - else - revision = IMX_CHIP_REVISION_1_0; - break; - case 1: - revision = IMX_CHIP_REVISION_1_1; - break; - case 2: - revision = IMX_CHIP_REVISION_1_2; - break; - case 3: - revision = IMX_CHIP_REVISION_1_3; - break; - case 4: - revision = IMX_CHIP_REVISION_1_4; - break; - case 5: - /* - * i.MX6DQ TO1.5 is defined as Rev 1.3 in Data Sheet, marked - * as 'D' in Part Number last character. - */ - revision = IMX_CHIP_REVISION_1_5; - break; - default: - /* - * Fail back to return raw register value instead of 0xff. - * It will be easy to know version information in SOC if it - * can't be recognized by known version. And some chip's (i.MX7D) - * digprog value match linux version format, so it needn't map - * again and we can use register value directly. + /* + * On i.MX7D digprog value match linux version format, so + * it needn't map again and we can use register value directly. + */ + if (of_device_is_compatible(np, "fsl,imx7d-anatop")) { + revision = digprog & 0xff; + } else { + + /* MAJOR: [15:8], the major silicon revison; + * MINOR: [7: 0], the minor silicon revison; + * + * please refer to the i.MX RM for the detailed + * silicon revison bit define. + * format the major part and minor part to match the + * linux kernel soc version format. */ revision = digprog & 0xff; + major_part = (digprog >> 8) & 0xf; + minor_part = digprog & 0xf; + revision = ((major_part + 1) << 4) | minor_part; } mxc_set_cpu_type(digprog >> 16 & 0xff);
On our i.MX6 SOC, the DIGPROG register is used for representing the SOC ID and silicon revision. The revision has two part: MAJOR and MINOR. each is represented in 8 bits in the register. bits [15:8]: reflect the MAJOR part of the revision; bits [7:0]: reflect the MINOR part of the revision; In our linux kernel, the soc revision is represented in 8 bits. MAJOR part and MINOR each occupy 4 bits. previous method does NOT take care about the MAJOR part in DIGPROG register. So reformat the revision read from the HW to be compatible with the revision format used in kernel. Signed-off-by: Bai Ping <ping.bai@nxp.com> --- arch/arm/mach-imx/anatop.c | 58 +++++++++++++++++----------------------------- 1 file changed, 21 insertions(+), 37 deletions(-)