@@ -18,7 +18,7 @@
linux,stdout-path = &sbc_serial0;
};
- memory {
+ memory@40000000 {
device_type = "memory";
reg = <0x40000000 0x80000000>;
};
@@ -83,7 +83,7 @@
* Bootloader initialized system infrastructure clock for
* serial devices.
*/
- clk_ext2f_a9: clockgen-c0@13 {
+ clk_ext2f_a9: clockgen-c0 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <200000000>;
@@ -260,7 +260,7 @@
clock-frequency = <0>;
};
- clockgen-d2@x9106000 {
+ clockgen-d2@9106000 {
compatible = "st,clkgen-c32";
reg = <0x9106000 0x1000>;
@@ -92,7 +92,7 @@
clocks = <&arm_periph_clk>;
};
- l2: cache-controller {
+ l2: cache-controller@8762000 {
compatible = "arm,pl310-cache";
reg = <0x08762000 0x1000>;
arm,data-latency = <3 3 3>;
@@ -389,7 +389,7 @@
reset-names = "global", "port";
};
- miphy28lp_phy: miphy28lp@9b22000 {
+ miphy28lp_phy: miphy28lp {
compatible = "st,miphy28lp-phy";
st,syscfg = <&syscfg_core>;
#address-cells = <1>;
@@ -803,7 +803,7 @@
status = "okay";
};
- st231_gp0: st231-gp0@0 {
+ st231_gp0: st231-gp0 {
compatible = "st,st231-rproc";
memory-region = <&gp0_reserved>;
resets = <&softreset STIH407_ST231_GP0_SOFTRESET>;
@@ -816,7 +816,7 @@
mboxes = <&mailbox0 0 2>, <&mailbox2 0 1>, <&mailbox0 0 3>, <&mailbox2 0 0>;
};
- st231_delta: st231-delta@0 {
+ st231_delta: st231-delta {
compatible = "st,st231-rproc";
memory-region = <&delta_reserved>;
resets = <&softreset STIH407_ST231_DMU_SOFTRESET>;
@@ -45,7 +45,7 @@
};
soc {
- pin-controller-sbc {
+ pin-controller-sbc@961f080 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,stih407-sbc-pinctrl";
@@ -369,7 +369,7 @@
};
};
- pin-controller-front0 {
+ pin-controller-front0@920f080 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,stih407-front-pinctrl";
@@ -929,7 +929,7 @@
};
};
- pin-controller-front1 {
+ pin-controller-front1@921f080 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,stih407-front-pinctrl";
@@ -962,7 +962,7 @@
};
};
- pin-controller-rear {
+ pin-controller-rear@922f080 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,stih407-rear-pinctrl";
@@ -1157,7 +1157,7 @@
};
};
- pin-controller-flash {
+ pin-controller-flash@923f080 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,stih407-flash-pinctrl";
@@ -18,7 +18,7 @@
linux,stdout-path = &sbc_serial0;
};
- memory {
+ memory@40000000 {
device_type = "memory";
reg = <0x40000000 0x80000000>;
};
@@ -19,7 +19,7 @@
linux,stdout-path = &uart1;
};
- memory {
+ memory@40000000 {
device_type = "memory";
reg = <0x40000000 0x40000000>;
};
@@ -201,7 +201,7 @@
};
};
- miphy28lp_phy: miphy28lp@9b22000 {
+ miphy28lp_phy: miphy28lp {
phy_port1: port@9b2a000 {
st,osc-force-ext;
@@ -85,7 +85,7 @@
* Bootloader initialized system infrastructure clock for
* serial devices.
*/
- clk_ext2f_a9: clockgen-c0@13 {
+ clk_ext2f_a9: clockgen-c0 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <200000000>;
@@ -272,7 +272,7 @@
clock-frequency = <0>;
};
- clockgen-d2@x9106000 {
+ clockgen-d2@9106000 {
compatible = "st,clkgen-c32";
reg = <0x9106000 0x1000>;
@@ -10,7 +10,7 @@
/ {
soc {
- pin-controller-rear {
+ pin-controller-rear@922f080 {
usb0 {
pinctrl_usb0: usb2-0 {
@@ -235,7 +235,7 @@
<&clk_s_d2_quadfs 1>;
};
- sti-hqvdp@9c000000 {
+ sti-hqvdp@9c00000 {
compatible = "st,stih407-hqvdp";
reg = <0x9C00000 0x100000>;
clock-names = "hqvdp", "pix_main";
@@ -18,7 +18,7 @@
linux,stdout-path = &sbc_serial0;
};
- memory {
+ memory@40000000 {
device_type = "memory";
reg = <0x40000000 0xc0000000>;
};
@@ -88,7 +88,7 @@
non-removable;
};
- miphy28lp_phy: miphy28lp@9b22000 {
+ miphy28lp_phy: miphy28lp {
phy_port0: port@9b22000 {
st,osc-rdy;
@@ -85,7 +85,7 @@
* Bootloader initialized system infrastructure clock for
* serial devices.
*/
- clk_ext2f_a9: clockgen-c0@13 {
+ clk_ext2f_a9: clockgen-c0 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <200000000>;
@@ -265,7 +265,7 @@
clock-frequency = <0>;
};
- clockgen-d2@x9106000 {
+ clockgen-d2@9106000 {
compatible = "st,clkgen-c32";
reg = <0x9106000 0x1000>;
@@ -80,7 +80,7 @@
st,i2c-min-sda-pulse-width-us = <5>;
};
- miphy28lp_phy: miphy28lp@9b22000 {
+ miphy28lp_phy: miphy28lp {
phy_port0: port@9b22000 {
st,osc-rdy;
@@ -126,7 +126,7 @@
clock-names = "c8sectpfe";
/* tsin0 is TSA on NIMA */
- tsin0: port@0 {
+ tsin0: port {
tsin-num = <0>;
serial-not-parallel;
i2c-bus = <&ssc2>;