| Message ID | 1518683903-10681-8-git-send-email-kbingham@kernel.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Kieran, Thank you for the patch. On Thursday, 15 February 2018 10:38:22 EET Kieran Bingham wrote: > From: Kieran Bingham <kieran.bingham@ideasonboard.com> > > Provide a device node for the ADV7511 as found on the Draak D3 platform. > > The ADV7511 is connected to the DU through a parallel mux chip, and is > configurable in hardware whether it is connected to LVDS0 or LVDS1. > > Connect through to LVDS0 as a default implementation. You need to model the LVDS decoder in DT too. I know that no driver and no DT bindings are available at the moment, and I'm aware that this patch enables the HDMI output on the Draak board, but I don't think it's upstreamable as-is. > Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> > --- > arch/arm64/boot/dts/renesas/r8a77995-draak.dts | 56 +++++++++++++++++++++++ > 1 file changed, 56 insertions(+) > > diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts > b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts index > 668e246dfc5d..df0c7773cb7d 100644 > --- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts > +++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts > @@ -27,6 +27,17 @@ > stdout-path = "serial0:115200n8"; > }; > > + hdmi-out { > + compatible = "hdmi-connector"; > + type = "a"; > + > + port { > + hdmi_con_out: endpoint { > + remote-endpoint = <&adv7511_out>; > + }; > + }; > + }; > + > vga { > compatible = "vga-connector"; > > @@ -124,6 +135,39 @@ > reg = <0x50>; > pagesize = <8>; > }; > + > + hdmi@39 { > + compatible = "adi,adv7511w"; > + reg = <0x39>, <0x3f>, <0x38>, <0x3c>; > + reg-names = "main", "edid", "packet", "cec"; > + interrupt-parent = <&gpio1>; > + interrupts = <28 IRQ_TYPE_LEVEL_LOW>; > + > + adi,input-depth = <8>; > + adi,input-colorspace = "rgb"; > + adi,input-clock = "1x"; > + adi,input-style = <1>; > + adi,input-justification = "evenly"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + adv7511_in: endpoint { > + remote-endpoint = <&lvds0_out>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + adv7511_out: endpoint { > + remote-endpoint = <&hdmi_con_out>; > + }; > + }; > + }; > + }; > }; > > &i2c1 { > @@ -146,6 +190,18 @@ > }; > }; > > +&lvds0 { > + status = "okay"; > + > + ports { > + port@1 { > + endpoint { > + remote-endpoint = <&adv7511_in>; > + }; > + }; > + }; > +}; > + > &ehci0 { > status = "okay"; > };
On Thu, Feb 15, 2018 at 04:16:00PM +0200, Laurent Pinchart wrote: > Hi Kieran, > > Thank you for the patch. > > On Thursday, 15 February 2018 10:38:22 EET Kieran Bingham wrote: > > From: Kieran Bingham <kieran.bingham@ideasonboard.com> > > > > Provide a device node for the ADV7511 as found on the Draak D3 platform. > > > > The ADV7511 is connected to the DU through a parallel mux chip, and is > > configurable in hardware whether it is connected to LVDS0 or LVDS1. > > > > Connect through to LVDS0 as a default implementation. > > You need to model the LVDS decoder in DT too. I know that no driver and no DT > bindings are available at the moment, and I'm aware that this patch enables > the HDMI output on the Draak board, but I don't think it's upstreamable as-is. Thanks, I've marked this as "Changes Requested".
Hi Laurent, On 15/02/18 14:16, Laurent Pinchart wrote: > Hi Kieran, > > Thank you for the patch. > > On Thursday, 15 February 2018 10:38:22 EET Kieran Bingham wrote: >> From: Kieran Bingham <kieran.bingham@ideasonboard.com> >> >> Provide a device node for the ADV7511 as found on the Draak D3 platform. >> >> The ADV7511 is connected to the DU through a parallel mux chip, and is >> configurable in hardware whether it is connected to LVDS0 or LVDS1. >> >> Connect through to LVDS0 as a default implementation. > > You need to model the LVDS decoder in DT too. I know that no driver and no DT > bindings are available at the moment, and I'm aware that this patch enables > the HDMI output on the Draak board, but I don't think it's upstreamable as-is. Ok, understood. - I'll drop this patch for now until we can schedule time to dedicate to looking into this. I'm sure the archive's will hold on to this patch for us as a starting point :-) -- Regards Kieran > >> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> >> --- >> arch/arm64/boot/dts/renesas/r8a77995-draak.dts | 56 +++++++++++++++++++++++ >> 1 file changed, 56 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts >> b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts index >> 668e246dfc5d..df0c7773cb7d 100644 >> --- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts >> +++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts >> @@ -27,6 +27,17 @@ >> stdout-path = "serial0:115200n8"; >> }; >> >> + hdmi-out { >> + compatible = "hdmi-connector"; >> + type = "a"; >> + >> + port { >> + hdmi_con_out: endpoint { >> + remote-endpoint = <&adv7511_out>; >> + }; >> + }; >> + }; >> + >> vga { >> compatible = "vga-connector"; >> >> @@ -124,6 +135,39 @@ >> reg = <0x50>; >> pagesize = <8>; >> }; >> + >> + hdmi@39 { >> + compatible = "adi,adv7511w"; >> + reg = <0x39>, <0x3f>, <0x38>, <0x3c>; >> + reg-names = "main", "edid", "packet", "cec"; >> + interrupt-parent = <&gpio1>; >> + interrupts = <28 IRQ_TYPE_LEVEL_LOW>; >> + >> + adi,input-depth = <8>; >> + adi,input-colorspace = "rgb"; >> + adi,input-clock = "1x"; >> + adi,input-style = <1>; >> + adi,input-justification = "evenly"; >> + >> + ports { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + port@0 { >> + reg = <0>; >> + adv7511_in: endpoint { >> + remote-endpoint = <&lvds0_out>; >> + }; >> + }; >> + >> + port@1 { >> + reg = <1>; >> + adv7511_out: endpoint { >> + remote-endpoint = <&hdmi_con_out>; >> + }; >> + }; >> + }; >> + }; >> }; >> >> &i2c1 { >> @@ -146,6 +190,18 @@ >> }; >> }; >> >> +&lvds0 { >> + status = "okay"; >> + >> + ports { >> + port@1 { >> + endpoint { >> + remote-endpoint = <&adv7511_in>; >> + }; >> + }; >> + }; >> +}; >> + >> &ehci0 { >> status = "okay"; >> }; > >
diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts index 668e246dfc5d..df0c7773cb7d 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts +++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts @@ -27,6 +27,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_out: endpoint { + remote-endpoint = <&adv7511_out>; + }; + }; + }; + vga { compatible = "vga-connector"; @@ -124,6 +135,39 @@ reg = <0x50>; pagesize = <8>; }; + + hdmi@39 { + compatible = "adi,adv7511w"; + reg = <0x39>, <0x3f>, <0x38>, <0x3c>; + reg-names = "main", "edid", "packet", "cec"; + interrupt-parent = <&gpio1>; + interrupts = <28 IRQ_TYPE_LEVEL_LOW>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + adi,input-style = <1>; + adi,input-justification = "evenly"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_con_out>; + }; + }; + }; + }; }; &i2c1 { @@ -146,6 +190,18 @@ }; }; +&lvds0 { + status = "okay"; + + ports { + port@1 { + endpoint { + remote-endpoint = <&adv7511_in>; + }; + }; + }; +}; + &ehci0 { status = "okay"; };