@@ -17,6 +17,7 @@
/dts-v1/;
#include <dt-bindings/reset/altr,rst-mgr-s10.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/stratix10-clock.h>
/ {
compatible = "altr,socfpga-stratix10";
@@ -92,9 +93,35 @@
interrupt-parent = <&intc>;
ranges = <0 0 0 0xffffffff>;
- clkmgr@ffd1000 {
- compatible = "altr,clk-mgr";
+ clkmgr: clock-controller@ffd10000 {
+ compatible = "intel,stratix10-clkmgr";
reg = <0xffd10000 0x1000>;
+ #clock-cells = <1>;
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cb_intosc_hs_div2_clk: cb-intosc-hs-div2-clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ };
+
+ cb_intosc_ls_clk: cb-intosc-ls-clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ };
+
+ f2s_free_clk: f2s-free-clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ };
+
+ osc1: osc1 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ };
+ };
};
gmac0: ethernet@ff800000 {
@@ -105,6 +132,8 @@
mac-address = [00 00 00 00 00 00];
resets = <&rst EMAC0_RESET>;
reset-names = "stmmaceth";
+ clocks = <&clkmgr STRATIX10_EMAC0_CLK>;
+ clock-names = "stmmaceth";
status = "disabled";
};
@@ -116,6 +145,8 @@
mac-address = [00 00 00 00 00 00];
resets = <&rst EMAC1_RESET>;
reset-names = "stmmaceth";
+ clocks = <&clkmgr STRATIX10_EMAC1_CLK>;
+ clock-names = "stmmaceth";
status = "disabled";
};
@@ -127,6 +158,8 @@
mac-address = [00 00 00 00 00 00];
resets = <&rst EMAC2_RESET>;
reset-names = "stmmaceth";
+ clocks = <&clkmgr STRATIX10_EMAC2_CLK>;
+ clock-names = "stmmaceth";
status = "disabled";
};
@@ -229,6 +262,9 @@
fifo-depth = <0x400>;
resets = <&rst SDMMC_RESET>;
reset-names = "reset";
+ clocks = <&clkmgr STRATIX10_L4_MP_CLK>,
+ <&clkmgr STRATIX10_SDMMC_CLK>;
+ clock-names = "biu", "ciu";
status = "disabled";
};
@@ -288,24 +324,32 @@
compatible = "snps,dw-apb-timer";
interrupts = <0 113 4>;
reg = <0xffc03000 0x100>;
+ clocks = <&clkmgr STRATIX10_L4_SP_CLK>;
+ clock-names = "timer";
};
timer1: timer1@ffc03100 {
compatible = "snps,dw-apb-timer";
interrupts = <0 114 4>;
reg = <0xffc03100 0x100>;
+ clocks = <&clkmgr STRATIX10_L4_SP_CLK>;
+ clock-names = "timer";
};
timer2: timer2@ffd00000 {
compatible = "snps,dw-apb-timer";
interrupts = <0 115 4>;
reg = <0xffd00000 0x100>;
+ clocks = <&clkmgr STRATIX10_L4_SP_CLK>;
+ clock-names = "timer";
};
timer3: timer3@ffd00100 {
compatible = "snps,dw-apb-timer";
interrupts = <0 116 4>;
reg = <0xffd00100 0x100>;
+ clocks = <&clkmgr STRATIX10_L4_SP_CLK>;
+ clock-names = "timer";
};
uart0: serial0@ffc02000 {
@@ -315,6 +359,7 @@
reg-shift = <2>;
reg-io-width = <4>;
resets = <&rst UART0_RESET>;
+ clocks = <&clkmgr STRATIX10_L4_SP_CLK>;
status = "disabled";
};
@@ -325,6 +370,7 @@
reg-shift = <2>;
reg-io-width = <4>;
resets = <&rst UART1_RESET>;
+ clocks = <&clkmgr STRATIX10_L4_SP_CLK>;
status = "disabled";
};
@@ -50,6 +50,16 @@
/* We expect the bootloader to fill in the reg */
reg = <0 0 0 0>;
};
+
+ soc {
+ clock-controller@ffd10000 {
+ clocks {
+ osc1 {
+ clock-frequency = <25000000>;
+ };
+ };
+ };
+ };
};
&gpio1 {
Use the clock bindings for the Stratix10 SoC. This includes changing the old binding of "intc,clk-s10-mgr" to "intel,stratix10-clkmgr". The reason that this can be done is that there are currently no clock driver for Stratix10, thus there are no consumers of the old binding. So changing the binding will not break any legacy code. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> --- v5: - no changes v4: - remove '_' in name of clock nodes - use clock-controller in SoCDK node in dts file v3: - use the correct vendor prefix - explain the binding change v2: - use a single clock binding for the clock controller --- arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi | 50 +++++++++++++++++++++- .../boot/dts/altera/socfpga_stratix10_socdk.dts | 10 +++++ 2 files changed, 58 insertions(+), 2 deletions(-)