@@ -84,19 +84,19 @@
0x2 0x0 0x0 0x7fb00000 0x00000100>;
status = "okay";
- nor@0,0 {
+ nor@0 {
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
bank-width = <2>;
device-width = <1>;
};
- nand@1,0 {
+ nand@100000000 {
compatible = "fsl,ifc-nand";
reg = <0x1 0x0 0x10000>;
};
- fpga: board-control@2,0 {
+ fpga: board-control@200000000 {
compatible = "fsl,ls1043aqds-fpga", "fsl,fpga-qixis";
reg = <0x2 0x0 0x0000100>;
};
@@ -97,7 +97,7 @@
0x1 0x0 0x0 0x7e800000 0x00010000
0x2 0x0 0x0 0x7fb00000 0x00000100>;
- nor@0,0 {
+ nor@0 {
compatible = "cfi-flash";
#address-cells = <1>;
#size-cells = <1>;
@@ -106,14 +106,14 @@
device-width = <1>;
};
- nand@1,0 {
+ nand@100000000 {
compatible = "fsl,ifc-nand";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x1 0x0 0x10000>;
};
- cpld: board-control@2,0 {
+ cpld: board-control@200000000 {
compatible = "fsl,ls1043ardb-cpld";
reg = <0x2 0x0 0x0000100>;
};
@@ -175,19 +175,19 @@
0x2 0x0 0x0 0x7fb00000 0x00000100>;
status = "okay";
- nor@0,0 {
+ nor@0 {
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
bank-width = <2>;
device-width = <1>;
};
- nand@1,0 {
+ nand@100000000 {
compatible = "fsl,ifc-nand";
reg = <0x1 0x0 0x10000>;
};
- fpga: board-control@2,0 {
+ fpga: board-control@200000000 {
compatible = "fsl,ls1046aqds-fpga", "fsl,fpga-qixis";
reg = <0x2 0x0 0x0000100>;
};
@@ -122,14 +122,14 @@
0x2 0x0 0x0 0x7fb00000 0x00000100>;
status = "okay";
- nand@0,0 {
+ nand@0 {
compatible = "fsl,ifc-nand";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x0 0x0 0x10000>;
};
- cpld: board-control@2,0 {
+ cpld: board-control@200000000 {
compatible = "fsl,ls1046ardb-cpld";
reg = <0x2 0x0 0x0000100>;
};
@@ -116,19 +116,19 @@
3 0 0x5 0x20000000 0x00010000>;
status = "okay";
- nor@0,0 {
+ nor@0 {
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
bank-width = <2>;
device-width = <1>;
};
- nand@2,0 {
+ nand@200000000 {
compatible = "fsl,ifc-nand";
reg = <0x2 0x0 0x10000>;
};
- fpga: board-control@3,0 {
+ fpga: board-control@300000000 {
compatible = "fsl,ls1088aqds-fpga", "fsl,fpga-qixis";
reg = <0x3 0x0 0x0000100>;
};
@@ -99,12 +99,12 @@
2 0 0x5 0x20000000 0x00010000>;
status = "okay";
- nand@0,0 {
+ nand@0 {
compatible = "fsl,ifc-nand";
reg = <0x0 0x0 0x10000>;
};
- fpga: board-control@2,0 {
+ fpga: board-control@200000000 {
compatible = "fsl,ls1088ardb-fpga", "fsl,fpga-qixis";
reg = <0x2 0x0 0x0000100>;
};
@@ -58,7 +58,7 @@
0x2 0x0 0x5 0x30000000 0x00010000
0x3 0x0 0x5 0x20000000 0x00010000>;
- nor@0,0 {
+ nor@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
@@ -67,12 +67,12 @@
device-width = <1>;
};
- nand@2,0 {
+ nand@200000000 {
compatible = "fsl,ifc-nand";
reg = <0x2 0x0 0x10000>;
};
- cpld@3,0 {
+ cpld@300000000 {
reg = <0x3 0x0 0x10000>;
compatible = "fsl,ls2080aqds-fpga", "fsl,fpga-qixis";
};
It fixes LS family SoCs device tree dtc warning in IFC child nodes. Warning (simple_bus_reg): Node /soc/ifc@1530000/nor@0,0 simple-bus unit address format error, expected "0" Warning (simple_bus_reg): Node /soc/ifc@1530000/nand@1,0 simple-bus unit address format error, expected "100000000" Warning (simple_bus_reg): Node /soc/ifc@1530000/board-control@2,0 simple-bus unit address format error, expected "200000000" Signed-off-by: Shawn Guo <shawnguo@kernel.org> --- arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts | 6 +++--- arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts | 6 +++--- arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts | 6 +++--- arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts | 4 ++-- arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts | 6 +++--- arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts | 4 ++-- arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi | 6 +++--- 7 files changed, 19 insertions(+), 19 deletions(-)