diff mbox

[v2,11/13] ARM: dts: ipq8074: Add peripheral nodes

Message ID 1521193101-4586-12-git-send-email-sricharan@codeaurora.org (mailing list archive)
State New, archived
Headers show

Commit Message

Sricharan Ramabadhran March 16, 2018, 9:38 a.m. UTC 
Add serial, i2c, bam, spi, qpic peripheral nodes.

Signed-off-by: Sricharan R <sricharan@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/ipq8074.dtsi | 105 ++++++++++++++++++++++++++++++++++
 1 file changed, 105 insertions(+)

Comments

Abhishek Sahu March 16, 2018, 10:47 a.m. UTC | #1 
On 2018-03-16 15:08, Sricharan R wrote:
> Add serial, i2c, bam, spi, qpic peripheral nodes.
> 
> Signed-off-by: Sricharan R <sricharan@codeaurora.org>
> ---
>  arch/arm64/boot/dts/qcom/ipq8074.dtsi | 105 
> ++++++++++++++++++++++++++++++++++
>  1 file changed, 105 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
> b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
> index 2bc5dec..806fc56 100644
> --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
> @@ -124,6 +124,111 @@
>  			clock-names = "core", "iface";
>  			status = "disabled";
>  		};
> +
> +		blsp_dma: dma@7884000 {
> +			compatible = "qcom,bam-v1.7.0";
> +			reg = <0x07884000 0x2b000>;

  we can remove leading zero. s/0x07884000/0x7884000

> +			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
> +			clock-names = "bam_clk";
> +			#dma-cells = <1>;
> +			qcom,ee = <0>;
> +		};
> +
> +		serial_blsp0: serial@78af000 {
> +			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
> +			reg = <0x78af000 0x200>;
> +			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
> +				 <&gcc GCC_BLSP1_AHB_CLK>;
> +			clock-names = "core", "iface";
> +			status = "disabled";
> +		};
> +
> +		serial_blsp2: serial@78B1000 {

  For maintaining uniformity, we can have all address in lower case
  s/78B1000/78b1000

> +			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
> +			reg = <0x78B1000 0x200>;

  same thing, here also

> +			interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>,
> +				<&gcc GCC_BLSP1_AHB_CLK>;
> +			clock-names = "core", "iface";
> +			dmas = <&blsp_dma 4>,
> +				<&blsp_dma 5>;
> +			dma-names = "tx", "rx";
> +			status = "disabled";
> +		};
> +
> +		spi_0: spi@78b5000 {
> +			compatible = "qcom,spi-qup-v2.2.1";
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <0x78b5000 0x600>;
> +			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
> +			spi-max-frequency = <50000000>;
> +			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
> +				<&gcc GCC_BLSP1_AHB_CLK>;
> +			clock-names = "core", "iface";
> +			dmas = <&blsp_dma 12>, <&blsp_dma 13>;
> +			dma-names = "tx", "rx";
> +			status = "disabled";
> +		};
> +
> +		i2c_0: i2c@78b6000 {
> +			compatible = "qcom,i2c-qup-v2.2.1";
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <0x78b6000 0x600>;
> +			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
> +				<&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
> +			clock-names = "iface", "core";
> +			clock-frequency  = <400000>;

  remove one extra space. clock-frequency = <400000>;

> +			dmas = <&blsp_dma 15>, <&blsp_dma 14>;
> +			dma-names = "rx", "tx";
> +			status = "disabled";
> +		};
> +
> +		i2c_1: i2c@78b7000 {
> +			compatible = "qcom,i2c-qup-v2.2.1";
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <0x78b7000 0x600>;
> +			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
> +				<&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
> +			clock-names = "iface", "core";
> +			clock-frequency  = <100000>;

  remove one extra space. clock-frequency = <100000>;

  with above changes.

  Reviewed-by: Abhishek Sahu <absahu@codeaurora.org>

> +			dmas = <&blsp_dma 17>, <&blsp_dma 16>;
> +			dma-names = "rx", "tx";
> +			status = "disabled";
> +		};
> +
> +		qpic_bam: dma@7984000 {
> +			compatible = "qcom,bam-v1.7.0";
> +			reg = <0x7984000 0x1a000>;
> +			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&gcc GCC_QPIC_AHB_CLK>;
> +			clock-names = "bam_clk";
> +			#dma-cells = <1>;
> +			qcom,ee = <0>;
> +			status = "disabled";
> +		};
> +
> +		qpic_nand: nand@79b0000 {
> +			compatible = "qcom,ipq8074-nand";
> +			reg = <0x79b0000 0x10000>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			clocks = <&gcc GCC_QPIC_CLK>,
> +				 <&gcc GCC_QPIC_AHB_CLK>;
> +			clock-names = "core", "aon";
> +
> +			dmas = <&qpic_bam 0>,
> +			       <&qpic_bam 1>,
> +			       <&qpic_bam 2>;
> +			dma-names = "tx", "rx", "cmd";
> +			status = "disabled";
> +		};
>  	};
> 
>  	cpus {
Sricharan Ramabadhran March 16, 2018, 12:43 p.m. UTC | #2 
On 3/16/2018 4:17 PM, Abhishek Sahu wrote:
> On 2018-03-16 15:08, Sricharan R wrote:
>> Add serial, i2c, bam, spi, qpic peripheral nodes.
>>
>> Signed-off-by: Sricharan R <sricharan@codeaurora.org>
>> ---
>>  arch/arm64/boot/dts/qcom/ipq8074.dtsi | 105 ++++++++++++++++++++++++++++++++++
>>  1 file changed, 105 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
>> b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
>> index 2bc5dec..806fc56 100644
>> --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
>> @@ -124,6 +124,111 @@
>>              clock-names = "core", "iface";
>>              status = "disabled";
>>          };
>> +
>> +        blsp_dma: dma@7884000 {
>> +            compatible = "qcom,bam-v1.7.0";
>> +            reg = <0x07884000 0x2b000>;
> 
>  we can remove leading zero. s/0x07884000/0x7884000
> 
>> +            interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
>> +            clocks = <&gcc GCC_BLSP1_AHB_CLK>;
>> +            clock-names = "bam_clk";
>> +            #dma-cells = <1>;
>> +            qcom,ee = <0>;
>> +        };
>> +
>> +        serial_blsp0: serial@78af000 {
>> +            compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
>> +            reg = <0x78af000 0x200>;
>> +            interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
>> +            clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
>> +                 <&gcc GCC_BLSP1_AHB_CLK>;
>> +            clock-names = "core", "iface";
>> +            status = "disabled";
>> +        };
>> +
>> +        serial_blsp2: serial@78B1000 {
> 
>  For maintaining uniformity, we can have all address in lower case
>  s/78B1000/78b1000
> 
>> +            compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
>> +            reg = <0x78B1000 0x200>;
> 
>  same thing, here also
> 
>> +            interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
>> +            clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>,
>> +                <&gcc GCC_BLSP1_AHB_CLK>;
>> +            clock-names = "core", "iface";
>> +            dmas = <&blsp_dma 4>,
>> +                <&blsp_dma 5>;
>> +            dma-names = "tx", "rx";
>> +            status = "disabled";
>> +        };
>> +
>> +        spi_0: spi@78b5000 {
>> +            compatible = "qcom,spi-qup-v2.2.1";
>> +            #address-cells = <1>;
>> +            #size-cells = <0>;
>> +            reg = <0x78b5000 0x600>;
>> +            interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
>> +            spi-max-frequency = <50000000>;
>> +            clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
>> +                <&gcc GCC_BLSP1_AHB_CLK>;
>> +            clock-names = "core", "iface";
>> +            dmas = <&blsp_dma 12>, <&blsp_dma 13>;
>> +            dma-names = "tx", "rx";
>> +            status = "disabled";
>> +        };
>> +
>> +        i2c_0: i2c@78b6000 {
>> +            compatible = "qcom,i2c-qup-v2.2.1";
>> +            #address-cells = <1>;
>> +            #size-cells = <0>;
>> +            reg = <0x78b6000 0x600>;
>> +            interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
>> +            clocks = <&gcc GCC_BLSP1_AHB_CLK>,
>> +                <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
>> +            clock-names = "iface", "core";
>> +            clock-frequency  = <400000>;
> 
>  remove one extra space. clock-frequency = <400000>;
> 
>> +            dmas = <&blsp_dma 15>, <&blsp_dma 14>;
>> +            dma-names = "rx", "tx";
>> +            status = "disabled";
>> +        };
>> +
>> +        i2c_1: i2c@78b7000 {
>> +            compatible = "qcom,i2c-qup-v2.2.1";
>> +            #address-cells = <1>;
>> +            #size-cells = <0>;
>> +            reg = <0x78b7000 0x600>;
>> +            interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
>> +            clocks = <&gcc GCC_BLSP1_AHB_CLK>,
>> +                <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
>> +            clock-names = "iface", "core";
>> +            clock-frequency  = <100000>;
> 
>  remove one extra space. clock-frequency = <100000>;
> 
>  with above changes.
> 
>  Reviewed-by: Abhishek Sahu <absahu@codeaurora.org>
> 

 Sure, will take care of all the above. Thanks

Regards,
 Sricharan
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index 2bc5dec..806fc56 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -124,6 +124,111 @@ 
 			clock-names = "core", "iface";
 			status = "disabled";
 		};
+
+		blsp_dma: dma@7884000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07884000 0x2b000>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		serial_blsp0: serial@78af000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x78af000 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		serial_blsp2: serial@78B1000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x78B1000 0x200>;
+			interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>,
+				<&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 4>,
+				<&blsp_dma 5>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		spi_0: spi@78b5000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x78b5000 0x600>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			spi-max-frequency = <50000000>;
+			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+				<&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 12>, <&blsp_dma 13>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		i2c_0: i2c@78b6000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x78b6000 0x600>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+				<&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
+			clock-names = "iface", "core";
+			clock-frequency  = <400000>;
+			dmas = <&blsp_dma 15>, <&blsp_dma 14>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2c_1: i2c@78b7000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x78b7000 0x600>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+				<&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
+			clock-names = "iface", "core";
+			clock-frequency  = <100000>;
+			dmas = <&blsp_dma 17>, <&blsp_dma 16>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		qpic_bam: dma@7984000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x7984000 0x1a000>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_QPIC_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			status = "disabled";
+		};
+
+		qpic_nand: nand@79b0000 {
+			compatible = "qcom,ipq8074-nand";
+			reg = <0x79b0000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&gcc GCC_QPIC_CLK>,
+				 <&gcc GCC_QPIC_AHB_CLK>;
+			clock-names = "core", "aon";
+
+			dmas = <&qpic_bam 0>,
+			       <&qpic_bam 1>,
+			       <&qpic_bam 2>;
+			dma-names = "tx", "rx", "cmd";
+			status = "disabled";
+		};
 	};
 
 	cpus {