diff mbox

[v2,13/13] ARM: dts: ipq8074: Enable few peripherals for hk01 board

Message ID 1521193101-4586-14-git-send-email-sricharan@codeaurora.org (mailing list archive)
State New, archived
Headers show

Commit Message

Sricharan Ramabadhran March 16, 2018, 9:38 a.m. UTC
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 103 ++++++++++++++++++++++++++++++
 1 file changed, 103 insertions(+)

Comments

Abhishek Sahu March 16, 2018, 10:57 a.m. UTC | #1
On 2018-03-16 15:08, Sricharan R wrote:
> Signed-off-by: Sricharan R <sricharan@codeaurora.org>
> ---
>  arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 103 
> ++++++++++++++++++++++++++++++
>  1 file changed, 103 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
> b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
> index 6a838b5..81dff867 100644
> --- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
> +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
> @@ -21,6 +21,7 @@
> 
>  	aliases {
>  		serial0 = &blsp1_uart5;
> +		serial1 = &serial_blsp2;
>  	};
> 
>  	chosen {
> @@ -41,6 +42,47 @@
>  					bias-disable;
>  				};
>  			};
> +
> +			 i2c_0_pins: i2c_0_pinmux {
> +				  mux {
> +					   pins = "gpio42", "gpio43";
> +					   function = "blsp1_i2c";
> +					   drive-strength = <8>;
> +					   bias-disable;
> +				  };
> +			 };
> +
> +			 spi_0_pins: spi_0_pins {
> +				  mux {
> +					   pins = "gpio38", "gpio39", "gpio40", "gpio41";
> +					   function = "blsp0_spi";
> +					   drive-strength = <8>;
> +					   bias-disable;
> +				  };
> +			 };
> +
> +			 hsuart_pins: hsuart_pins {
> +				  mux {
> +					   pins = "gpio46", "gpio47", "gpio48", "gpio49";
> +					   function = "blsp2_uart";
> +					   drive-strength = <8>;
> +					   bias-disable;
> +				  };
> +			 };
> +
> +			 qpic_pins: qpic_pins {
> +				mux {
> +					   pins = "gpio1", "gpio3", "gpio4",
> +						  "gpio5", "gpio6", "gpio7",
> +						  "gpio8", "gpio10", "gpio11",
> +						  "gpio12", "gpio13", "gpio14",
> +						  "gpio15", "gpio16", "gpio17";
> +					   function = "qpic";
> +					   drive-strength = <8>;
> +					   bias-disable;
> +				  };
> +			};
> +
>  		};
> 
>  		serial@78b3000 {
> @@ -48,5 +90,66 @@
>  			pinctrl-names = "default";
>  			status = "ok";
>  		};
> +
> +		spi@78b5000 {
> +			 pinctrl-0 = <&spi_0_pins>;
> +			 pinctrl-names = "default";
> +			 status = "ok";
> +
> +			 m25p80@0 {
> +				  #address-cells = <1>;
> +				  #size-cells = <1>;
> +				  compatible = "n25q128a11", "jedec,spi-nor";
> +				  reg = <0>;
> +				  spi-max-frequency = <50000000>;
> +			 };
> +		};
> +
> +		serial@78B1000 {

  s/78B1000/78b1000

  With that,
  Reviewed-by: Abhishek Sahu <absahu@codeaurora.org>

> +			 pinctrl-0 = <&hsuart_pins>;
> +			 pinctrl-names = "default";
> +			 status = "ok";
> +		};
> +
> +		i2c_0@78b6000 {
> +			 pinctrl-0 = <&i2c_0_pins>;
> +			 pinctrl-names = "default";
> +			 status = "ok";
> +		};
> +
> +		dma@7984000 {
> +			 status = "ok";
> +		};
> +
> +		nand@79b0000 {
> +			pinctrl-0 = <&qpic_pins>;
> +			pinctrl-names = "default";
> +			status = "ok";
> +
> +			nand@0 {
> +				reg = <0>;
> +				nand-ecc-strength = <4>;
> +				nand-ecc-step-size = <512>;
> +				nand-bus-width = <8>;
> +			};
> +		};
> +
> +		phy@86000 {
> +			status = "ok";
> +		};
> +
> +		phy@8e000 {
> +			status = "ok";
> +		};
> +
> +		pci@20000000 {
> +			status = "ok";
> +			perst-gpio = <&tlmm 58 0x1>;
> +		};
> +
> +		pci@10000000 {
> +			status = "ok";
> +			perst-gpio = <&tlmm 61 0x1>;
> +		};
>  	};
>  };
Sricharan Ramabadhran March 16, 2018, 12:43 p.m. UTC | #2
Hi Abhishek,

On 3/16/2018 4:27 PM, Abhishek Sahu wrote:
> On 2018-03-16 15:08, Sricharan R wrote:
>> Signed-off-by: Sricharan R <sricharan@codeaurora.org>
>> ---
>>  arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 103 ++++++++++++++++++++++++++++++
>>  1 file changed, 103 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
>> b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
>> index 6a838b5..81dff867 100644
>> --- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
>> +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
>> @@ -21,6 +21,7 @@
>>
>>      aliases {
>>          serial0 = &blsp1_uart5;
>> +        serial1 = &serial_blsp2;
>>      };
>>
>>      chosen {
>> @@ -41,6 +42,47 @@
>>                      bias-disable;
>>                  };
>>              };
>> +
>> +             i2c_0_pins: i2c_0_pinmux {
>> +                  mux {
>> +                       pins = "gpio42", "gpio43";
>> +                       function = "blsp1_i2c";
>> +                       drive-strength = <8>;
>> +                       bias-disable;
>> +                  };
>> +             };
>> +
>> +             spi_0_pins: spi_0_pins {
>> +                  mux {
>> +                       pins = "gpio38", "gpio39", "gpio40", "gpio41";
>> +                       function = "blsp0_spi";
>> +                       drive-strength = <8>;
>> +                       bias-disable;
>> +                  };
>> +             };
>> +
>> +             hsuart_pins: hsuart_pins {
>> +                  mux {
>> +                       pins = "gpio46", "gpio47", "gpio48", "gpio49";
>> +                       function = "blsp2_uart";
>> +                       drive-strength = <8>;
>> +                       bias-disable;
>> +                  };
>> +             };
>> +
>> +             qpic_pins: qpic_pins {
>> +                mux {
>> +                       pins = "gpio1", "gpio3", "gpio4",
>> +                          "gpio5", "gpio6", "gpio7",
>> +                          "gpio8", "gpio10", "gpio11",
>> +                          "gpio12", "gpio13", "gpio14",
>> +                          "gpio15", "gpio16", "gpio17";
>> +                       function = "qpic";
>> +                       drive-strength = <8>;
>> +                       bias-disable;
>> +                  };
>> +            };
>> +
>>          };
>>
>>          serial@78b3000 {
>> @@ -48,5 +90,66 @@
>>              pinctrl-names = "default";
>>              status = "ok";
>>          };
>> +
>> +        spi@78b5000 {
>> +             pinctrl-0 = <&spi_0_pins>;
>> +             pinctrl-names = "default";
>> +             status = "ok";
>> +
>> +             m25p80@0 {
>> +                  #address-cells = <1>;
>> +                  #size-cells = <1>;
>> +                  compatible = "n25q128a11", "jedec,spi-nor";
>> +                  reg = <0>;
>> +                  spi-max-frequency = <50000000>;
>> +             };
>> +        };
>> +
>> +        serial@78B1000 {
> 
>  s/78B1000/78b1000
> 
>  With that,
>  Reviewed-by: Abhishek Sahu <absahu@codeaurora.org>
> 

 ok, Thanks.

Regards,
 Sricharan
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
index 6a838b5..81dff867 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
@@ -21,6 +21,7 @@ 
 
 	aliases {
 		serial0 = &blsp1_uart5;
+		serial1 = &serial_blsp2;
 	};
 
 	chosen {
@@ -41,6 +42,47 @@ 
 					bias-disable;
 				};
 			};
+
+			 i2c_0_pins: i2c_0_pinmux {
+				  mux {
+					   pins = "gpio42", "gpio43";
+					   function = "blsp1_i2c";
+					   drive-strength = <8>;
+					   bias-disable;
+				  };
+			 };
+
+			 spi_0_pins: spi_0_pins {
+				  mux {
+					   pins = "gpio38", "gpio39", "gpio40", "gpio41";
+					   function = "blsp0_spi";
+					   drive-strength = <8>;
+					   bias-disable;
+				  };
+			 };
+
+			 hsuart_pins: hsuart_pins {
+				  mux {
+					   pins = "gpio46", "gpio47", "gpio48", "gpio49";
+					   function = "blsp2_uart";
+					   drive-strength = <8>;
+					   bias-disable;
+				  };
+			 };
+
+			 qpic_pins: qpic_pins {
+				mux {
+					   pins = "gpio1", "gpio3", "gpio4",
+						  "gpio5", "gpio6", "gpio7",
+						  "gpio8", "gpio10", "gpio11",
+						  "gpio12", "gpio13", "gpio14",
+						  "gpio15", "gpio16", "gpio17";
+					   function = "qpic";
+					   drive-strength = <8>;
+					   bias-disable;
+				  };
+			};
+
 		};
 
 		serial@78b3000 {
@@ -48,5 +90,66 @@ 
 			pinctrl-names = "default";
 			status = "ok";
 		};
+
+		spi@78b5000 {
+			 pinctrl-0 = <&spi_0_pins>;
+			 pinctrl-names = "default";
+			 status = "ok";
+
+			 m25p80@0 {
+				  #address-cells = <1>;
+				  #size-cells = <1>;
+				  compatible = "n25q128a11", "jedec,spi-nor";
+				  reg = <0>;
+				  spi-max-frequency = <50000000>;
+			 };
+		};
+
+		serial@78B1000 {
+			 pinctrl-0 = <&hsuart_pins>;
+			 pinctrl-names = "default";
+			 status = "ok";
+		};
+
+		i2c_0@78b6000 {
+			 pinctrl-0 = <&i2c_0_pins>;
+			 pinctrl-names = "default";
+			 status = "ok";
+		};
+
+		dma@7984000 {
+			 status = "ok";
+		};
+
+		nand@79b0000 {
+			pinctrl-0 = <&qpic_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+
+			nand@0 {
+				reg = <0>;
+				nand-ecc-strength = <4>;
+				nand-ecc-step-size = <512>;
+				nand-bus-width = <8>;
+			};
+		};
+
+		phy@86000 {
+			status = "ok";
+		};
+
+		phy@8e000 {
+			status = "ok";
+		};
+
+		pci@20000000 {
+			status = "ok";
+			perst-gpio = <&tlmm 58 0x1>;
+		};
+
+		pci@10000000 {
+			status = "ok";
+			perst-gpio = <&tlmm 61 0x1>;
+		};
 	};
 };