@@ -71,7 +71,6 @@ struct stm32_usbphyc {
struct stm32_usbphyc_phy **phys;
int nphys;
int switch_setup;
- bool pll_enabled;
};
static inline void stm32_usbphyc_set_bits(void __iomem *reg, u32 bits)
@@ -84,7 +83,8 @@ static inline void stm32_usbphyc_clr_bits(void __iomem *reg, u32 bits)
writel_relaxed(readl_relaxed(reg) & ~bits, reg);
}
-static void stm32_usbphyc_get_pll_params(u32 clk_rate, struct pll_params *pll_params)
+static void stm32_usbphyc_get_pll_params(u32 clk_rate,
+ struct pll_params *pll_params)
{
unsigned long long fvco, ndiv, frac;
@@ -271,7 +271,6 @@ static struct phy *stm32_usbphyc_of_xlate(struct device *dev,
struct stm32_usbphyc *usbphyc = dev_get_drvdata(dev);
struct stm32_usbphyc_phy *usbphyc_phy = NULL;
struct device_node *phynode = args->np;
-
int port = 0;
for (port = 0; port < usbphyc->nphys; port++) {
@@ -367,8 +366,8 @@ static int stm32_usbphyc_probe(struct platform_device *pdev)
if (IS_ERR(phy)) {
ret = PTR_ERR(phy);
if (ret != -EPROBE_DEFER)
- dev_err(dev,
- "failed to create phy%d: %d\n", i, ret);
+ dev_err(dev, "failed to create phy%d: %d\n",
+ port, ret);
goto put_child;
}
This patch fixes the following issues: * warning reported by checkpatch: WARNING: line over 80 characters #87: FILE: drivers/phy/st/phy-stm32-usbphyc.c:87: +static void stm32_usbphyc_get_pll_params(u32 clk_rate, struct pll_params *pll_params) * bug reported by static checker (Dan Carpenter): drivers/phy/st/phy-stm32-usbphyc.c:371 stm32_usbphyc_probe() error: uninitialized symbol 'i'. * unused stm32_usbphyc structure member: bool pll_enabled. * unnecessary extra line in stm32_usbphyc_of_xlate Fixes: 94c358da3a05 "phy: stm32: add support for STM32 USB PHY Controller (USBPHYC)" Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> --- drivers/phy/st/phy-stm32-usbphyc.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-)