[v5,09/13] ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c1 board file

Commit Message

Sricharan Ramabadhran March 23, 2018, 10:18 a.m. UTC

Reviewed-by: Abhishek Sahu <[e-mail]>
Signed-off-by: Sricharan R <[e-mail]>
---
 arch/arm/boot/dts/Makefile                      |  1 +
 arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts | 65 +++++++++++++++++++++++++
 2 files changed, 66 insertions(+)
 create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts

Comments

Bjorn Andersson March 27, 2018, 5:22 p.m. UTC | #1

On Fri 23 Mar 03:18 PDT 2018, Sricharan R wrote:
> +#include "qcom-ipq4019-ap.dk07.1.dtsi"
> +
> +/ {
> +	model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1-C1";

Add compatible for the board.

> +

Regards,
Bjorn

Sricharan Ramabadhran April 2, 2018, 6:10 a.m. UTC | #2

On 3/27/2018 10:52 PM, Bjorn Andersson wrote:
> On Fri 23 Mar 03:18 PDT 2018, Sricharan R wrote:
>> +#include "qcom-ipq4019-ap.dk07.1.dtsi"
>> +
>> +/ {
>> +	model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1-C1";
> 
> Add compatible for the board.
> 

 ok.

Regards,
 Sricharan

Patch

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index cf083c9..ae7f214 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -749,6 +749,7 @@  dtb-$(CONFIG_ARCH_QCOM) += \
 	qcom-ipq4019-ap.dk01.1-c1.dtb \
 	qcom-ipq4019-ap.dk04.1-c1.dtb \
 	qcom-ipq4019-ap.dk04.1-c3.dtb \
+	qcom-ipq4019-ap.dk07.1-c1.dtb \
 	qcom-ipq8064-ap148.dtb \
 	qcom-msm8660-surf.dtb \
 	qcom-msm8960-cdp.dtb \
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
new file mode 100644
index 0000000..dab052c
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
@@ -0,0 +1,65 @@ 
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018, The Linux Foundation. All rights reserved.
+
+#include "qcom-ipq4019-ap.dk07.1.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1-C1";
+
+	soc {
+		pci@40000000 {
+			status = "ok";
+			perst-gpio = <&tlmm 38 0x1>;
+		};
+
+		spi@78b6000 { /* BLSP1 QUP2 */
+			status = "ok";
+		};
+
+		pinctrl@1000000 {
+			serial_1_pins: serial1_pinmux {
+				mux {
+					pins = "gpio8", "gpio9",
+						"gpio10", "gpio11";
+					function = "blsp_uart1";
+					bias-disable;
+				};
+			};
+
+			spi_0_pins: spi_0_pinmux {
+				pinmux {
+					function = "blsp_spi0";
+					pins = "gpio13", "gpio14", "gpio15";
+					bias-disable;
+				};
+				pinmux_cs {
+					function = "gpio";
+					pins = "gpio12";
+					bias-disable;
+					output-high;
+				};
+			};
+		};
+
+		serial@78b0000 {
+			pinctrl-0 = <&serial_1_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+		};
+
+		spi@78b5000 { /* BLSP1 QUP1 */
+			pinctrl-0 = <&spi_0_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+			cs-gpios = <&tlmm 12 0>;
+
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0>;
+				compatible = "n25q128a11";
+				spi-max-frequency = <24000000>;
+			};
+		};
+	};
+};