@@ -33,6 +33,8 @@
#define SGMII_LINK_MAC_MAC_FORCED 2
#define SGMII_LINK_MAC_FIBER 3
#define SGMII_LINK_MAC_PHY_NO_MDIO 4
+#define RGMII_LINK_MAC_PHY 5
+#define RGMII_LINK_MAC_PHY_NO_MDIO 7
#define XGMII_LINK_MAC_PHY 10
#define XGMII_LINK_MAC_MAC_FORCED 11
@@ -166,6 +166,9 @@
#define GBE_RXHOOK_ORDER 0
#define GBE_DEFAULT_ALE_AGEOUT 30
#define SLAVE_LINK_IS_XGMII(s) ((s)->link_interface >= XGMII_LINK_MAC_PHY)
+#define SLAVE_LINK_IS_RGMII(s) \
+ (((s)->link_interface >= RGMII_LINK_MAC_PHY) && \
+ ((s)->link_interface <= RGMII_LINK_MAC_PHY_NO_MDIO))
#define NETCP_LINK_STATE_INVALID -1
#define GBE_SET_REG_OFS(p, rb, rn) p->rb##_ofs.rn = \
@@ -2091,8 +2094,9 @@ static void netcp_ethss_link_state_action(struct gbe_priv *gbe_dev,
ALE_PORT_STATE_FORWARD);
if (ndev && slave->open &&
- slave->link_interface != SGMII_LINK_MAC_PHY &&
- slave->link_interface != XGMII_LINK_MAC_PHY)
+ ((slave->link_interface != SGMII_LINK_MAC_PHY) &&
+ (slave->link_interface != RGMII_LINK_MAC_PHY) &&
+ (slave->link_interface != XGMII_LINK_MAC_PHY)))
netif_carrier_on(ndev);
} else {
writel(mac_control, GBE_REG_ADDR(slave, emac_regs,
@@ -2101,8 +2105,9 @@ static void netcp_ethss_link_state_action(struct gbe_priv *gbe_dev,
ALE_PORT_STATE,
ALE_PORT_STATE_DISABLE);
if (ndev &&
- slave->link_interface != SGMII_LINK_MAC_PHY &&
- slave->link_interface != XGMII_LINK_MAC_PHY)
+ ((slave->link_interface != SGMII_LINK_MAC_PHY) &&
+ (slave->link_interface != RGMII_LINK_MAC_PHY) &&
+ (slave->link_interface != XGMII_LINK_MAC_PHY)))
netif_carrier_off(ndev);
}
@@ -2914,6 +2919,7 @@ static int init_slave(struct gbe_priv *gbe_dev, struct gbe_slave *slave,
slave->open = false;
if ((slave->link_interface == SGMII_LINK_MAC_PHY) ||
+ (slave->link_interface == RGMII_LINK_MAC_PHY) ||
(slave->link_interface == XGMII_LINK_MAC_PHY))
slave->phy_node = of_parse_phandle(node, "phy-handle", 0);
slave->port_num = gbe_get_slave_port(gbe_dev, slave->slave_num);
@@ -3076,6 +3082,9 @@ static void init_secondary_ports(struct gbe_priv *gbe_dev,
if (slave->link_interface == SGMII_LINK_MAC_PHY) {
phy_mode = PHY_INTERFACE_MODE_SGMII;
slave->phy_port_t = PORT_MII;
+ } else if (slave->link_interface == RGMII_LINK_MAC_PHY) {
+ phy_mode = PHY_INTERFACE_MODE_RGMII;
+ slave->phy_port_t = PORT_MII;
} else {
phy_mode = PHY_INTERFACE_MODE_NA;
slave->phy_port_t = PORT_FIBRE;
@@ -3083,6 +3092,7 @@ static void init_secondary_ports(struct gbe_priv *gbe_dev,
for_each_sec_slave(slave, gbe_dev) {
if ((slave->link_interface != SGMII_LINK_MAC_PHY) &&
+ (slave->link_interface != RGMII_LINK_MAC_PHY) &&
(slave->link_interface != XGMII_LINK_MAC_PHY))
continue;
slave->phy =
2u cpsw hardware on K2G uses sgmii link to interface with Phy. So add support for this interface in the code so that drover can be re-used for 2u hardware. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> --- drivers/net/ethernet/ti/netcp.h | 2 ++ drivers/net/ethernet/ti/netcp_ethss.c | 18 ++++++++++++++---- 2 files changed, 16 insertions(+), 4 deletions(-)