diff mbox

[v4,08/14] dt: qcom: Add opp and thermal to the msm8996

Message ID 1522358807-10413-9-git-send-email-ilialin@codeaurora.org (mailing list archive)
State New, archived
Headers show

Commit Message

Ilia Lin March 29, 2018, 9:26 p.m. UTC 
Signed-off-by: Ilia Lin <ilialin@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 275 +++++++++++++++++++++++++++++++++-
 1 file changed, 267 insertions(+), 8 deletions(-)

Comments

Viresh Kumar April 2, 2018, 9:16 a.m. UTC | #1 
On 30-03-18, 00:26, Ilia Lin wrote:
> Signed-off-by: Ilia Lin <ilialin@codeaurora.org>
> ---
>  arch/arm64/boot/dts/qcom/msm8996.dtsi | 275 +++++++++++++++++++++++++++++++++-
>  1 file changed, 267 insertions(+), 8 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> index 410ae78..a0792bd 100644
> --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> @@ -14,6 +14,7 @@
>  #include <dt-bindings/clock/qcom,gcc-msm8996.h>
>  #include <dt-bindings/clock/qcom,mmcc-msm8996.h>
>  #include <dt-bindings/clock/qcom,rpmcc.h>
> +#include <dt-bindings/thermal/thermal.h>
>  
>  / {
>  	model = "Qualcomm Technologies, Inc. MSM8996";
> @@ -97,6 +98,11 @@
>  			compatible = "qcom,kryo";
>  			reg = <0x0 0x0>;
>  			enable-method = "psci";
> +			clocks = <&kryocc 0>;
> +			operating-points-v2 = <&cluster0_opp>;
> +			cooling-min-level = <0>;
> +			cooling-max-level = <15>;

The min/max properties are removed from DT documentation now. You don't need to
add them anymore.

> +	cluster0_opp: opp_table0 {
> +		compatible = "operating-points-v2";
> +		opp-shared;

Is Kryo like krait where CPUs do DVFS independently ? If yes, then opp-shared
thing should be dropped.

> +
> +		opp-307200000 {
> +			opp-hz = /bits/ 64 <  307200000 >;

Why have you added spaces after < and before > here ?
Viresh Kumar May 4, 2018, 6:04 a.m. UTC | #2 
On 2 April 2018 at 14:46, Viresh Kumar <viresh.kumar@linaro.org> wrote:

>> +     cluster0_opp: opp_table0 {
>> +             compatible = "operating-points-v2";
>> +             opp-shared;
>
> Is Kryo like krait where CPUs do DVFS independently ? If yes, then opp-shared
> thing should be dropped.

Have you ever replied to this question ? Sorry, but I am not able to
find it in my inbox :(
Ilia Lin May 4, 2018, 6:48 a.m. UTC | #3 
Kryo has single clock per cluster. I define here a shared OPP table per cluster.

> -----Original Message-----
> From: Viresh Kumar <viresh.kumar@linaro.org>
> Sent: Friday, May 4, 2018 09:04
> To: Ilia Lin <ilialin@codeaurora.org>
> Cc: Michael Turquette <mturquette@baylibre.com>; Stephen Boyd
> <sboyd@kernel.org>; Rob Herring <robh@kernel.org>; Mark Rutland
> <mark.rutland@arm.com>; Rafael J. Wysocki <rjw@rjwysocki.net>; Liam
> Girdwood <lgirdwood@gmail.com>; Mark Brown <broonie@kernel.org>;
> Andy Gross <andy.gross@linaro.org>; David Brown
> <david.brown@linaro.org>; Catalin Marinas <catalin.marinas@arm.com>; Will
> Deacon <will.deacon@arm.com>; Linux Clock List <linux-
> clk@vger.kernel.org>; devicetree@vger.kernel.org; Linux Kernel Mailing List
> <linux-kernel@vger.kernel.org>; linux-pm@vger.kernel.org; linux-arm-
> msm@vger.kernel.org; open list:ARM/QUALCOMM SUPPORT <linux-
> soc@vger.kernel.org>; linux-arm-kernel@lists.infradead.org; Nayak,
> Rajendra <rnayak@codeaurora.org>; Amit Kucheria
> <amit.kucheria@linaro.org>; Nicolas Dechesne
> <nicolas.dechesne@linaro.org>; celster@codeaurora.org;
> tfinkel@codeaurora.org
> Subject: Re: [PATCH v4 08/14] dt: qcom: Add opp and thermal to the
> msm8996
> 
> On 2 April 2018 at 14:46, Viresh Kumar <viresh.kumar@linaro.org> wrote:
> 
> >> +     cluster0_opp: opp_table0 {
> >> +             compatible = "operating-points-v2";
> >> +             opp-shared;
> >
> > Is Kryo like krait where CPUs do DVFS independently ? If yes, then
> > opp-shared thing should be dropped.
> 
> Have you ever replied to this question ? Sorry, but I am not able to find it in
> my inbox :(
Viresh Kumar May 4, 2018, 7:03 a.m. UTC | #4 
On 04-05-18, 09:48, ilialin@codeaurora.org wrote:
> Kryo has single clock per cluster. I define here a shared OPP table per cluster.

Thanks for clarifying.
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 410ae78..a0792bd 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -14,6 +14,7 @@ 
 #include <dt-bindings/clock/qcom,gcc-msm8996.h>
 #include <dt-bindings/clock/qcom,mmcc-msm8996.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	model = "Qualcomm Technologies, Inc. MSM8996";
@@ -97,6 +98,11 @@ 
 			compatible = "qcom,kryo";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
+			clocks = <&kryocc 0>;
+			operating-points-v2 = <&cluster0_opp>;
+			cooling-min-level = <0>;
+			cooling-max-level = <15>;
+			#cooling-cells = <2>;
 			next-level-cache = <&L2_0>;
 			L2_0: l2-cache {
 			      compatible = "cache";
@@ -109,6 +115,11 @@ 
 			compatible = "qcom,kryo";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
+			clocks = <&kryocc 0>;
+			operating-points-v2 = <&cluster0_opp>;
+			cooling-min-level = <0>;
+			cooling-max-level = <15>;
+			#cooling-cells = <2>;
 			next-level-cache = <&L2_0>;
 		};
 
@@ -117,6 +128,11 @@ 
 			compatible = "qcom,kryo";
 			reg = <0x0 0x100>;
 			enable-method = "psci";
+			clocks = <&kryocc 1>;
+			operating-points-v2 = <&cluster1_opp>;
+			cooling-min-level = <0>;
+			cooling-max-level = <15>;
+			#cooling-cells = <2>;
 			next-level-cache = <&L2_1>;
 			L2_1: l2-cache {
 			      compatible = "cache";
@@ -129,6 +145,11 @@ 
 			compatible = "qcom,kryo";
 			reg = <0x0 0x101>;
 			enable-method = "psci";
+			clocks = <&kryocc 1>;
+			operating-points-v2 = <&cluster1_opp>;
+			cooling-min-level = <0>;
+			cooling-max-level = <15>;
+			#cooling-cells = <2>;
 			next-level-cache = <&L2_1>;
 		};
 
@@ -155,6 +176,182 @@ 
 		};
 	};
 
+	cluster0_opp: opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-307200000 {
+			opp-hz = /bits/ 64 <  307200000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-422400000 {
+			opp-hz = /bits/ 64 <  422400000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-480000000 {
+			opp-hz = /bits/ 64 <  480000000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-556800000 {
+			opp-hz = /bits/ 64 <  556800000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-652800000 {
+			opp-hz = /bits/ 64 <  652800000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-729600000 {
+			opp-hz = /bits/ 64 <  729600000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-844800000 {
+			opp-hz = /bits/ 64 <  844800000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-960000000 {
+			opp-hz = /bits/ 64 <  960000000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1036800000 {
+			opp-hz = /bits/ 64 < 1036800000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1113600000 {
+			opp-hz = /bits/ 64 < 1113600000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1190400000 {
+			opp-hz = /bits/ 64 < 1190400000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1228800000 {
+			opp-hz = /bits/ 64 < 1228800000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1324800000 {
+			opp-hz = /bits/ 64 < 1324800000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1401600000 {
+			opp-hz = /bits/ 64 < 1401600000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1478400000 {
+			opp-hz = /bits/ 64 < 1478400000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1593600000 {
+			opp-hz = /bits/ 64 < 1593600000 >;
+			clock-latency-ns = <200000>;
+		};
+	};
+
+	cluster1_opp: opp_table1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-307200000 {
+			opp-hz = /bits/ 64 <  307200000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-403200000 {
+			opp-hz = /bits/ 64 <  403200000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-480000000 {
+			opp-hz = /bits/ 64 <  480000000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-556800000 {
+			opp-hz = /bits/ 64 <  556800000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-652800000 {
+			opp-hz = /bits/ 64 <  652800000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-729600000 {
+			opp-hz = /bits/ 64 <  729600000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-806400000 {
+			opp-hz = /bits/ 64 <  806400000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-883200000 {
+			opp-hz = /bits/ 64 <  883200000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-940800000 {
+			opp-hz = /bits/ 64 <  940800000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1036800000 {
+			opp-hz = /bits/ 64 < 1036800000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1113600000 {
+			opp-hz = /bits/ 64 < 1113600000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1190400000 {
+			opp-hz = /bits/ 64 < 1190400000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1248000000 {
+			opp-hz = /bits/ 64 < 1248000000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1324800000 {
+			opp-hz = /bits/ 64 < 1324800000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1401600000 {
+			opp-hz = /bits/ 64 < 1401600000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1478400000 {
+			opp-hz = /bits/ 64 < 1478400000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1555200000 {
+			opp-hz = /bits/ 64 < 1555200000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1632000000 {
+			opp-hz = /bits/ 64 < 1632000000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1708800000 {
+			opp-hz = /bits/ 64 < 1708800000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1785600000 {
+			opp-hz = /bits/ 64 < 1785600000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1824000000 {
+			opp-hz = /bits/ 64 < 1824000000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1920000000 {
+			opp-hz = /bits/ 64 < 1920000000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1996800000 {
+			opp-hz = /bits/ 64 < 1996800000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-2073600000 {
+			opp-hz = /bits/ 64 < 2073600000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-2150400000 {
+			opp-hz = /bits/ 64 < 2150400000 >;
+			clock-latency-ns = <200000>;
+		};
+	};
+
 	thermal-zones {
 		cpu-thermal0 {
 			polling-delay-passive = <250>;
@@ -163,18 +360,34 @@ 
 			thermal-sensors = <&tsens0 3>;
 
 			trips {
-				cpu_alert0: trip0 {
+				cpu_alert0: cpu_alert0 {
 					temperature = <75000>;
 					hysteresis = <2000>;
+					type = "active";
+				};
+				cpu_warn0: cpu_warn0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit0: trip1 {
+				cpu_crit0: cpu_crit0 {
 					temperature = <110000>;
 					hysteresis = <2000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT 7>;
+				};
+				map1 {
+					trip = <&cpu_warn0>;
+					cooling-device = <&CPU0 8 THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		cpu-thermal1 {
@@ -184,18 +397,34 @@ 
 			thermal-sensors = <&tsens0 5>;
 
 			trips {
-				cpu_alert1: trip0 {
+				cpu_alert1: cpu_alert1 {
 					temperature = <75000>;
 					hysteresis = <2000>;
+					type = "active";
+				};
+				cpu_warn1: cpu_warn1 {
+					temperature = <90000>;
+					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit1: trip1 {
+				cpu_crit1: cpu_crit1 {
 					temperature = <110000>;
 					hysteresis = <2000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT 7>;
+				};
+				map1 {
+					trip = <&cpu_warn1>;
+					cooling-device = <&CPU0 8 THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		cpu-thermal2 {
@@ -205,18 +434,33 @@ 
 			thermal-sensors = <&tsens0 8>;
 
 			trips {
-				cpu_alert2: trip0 {
+				cpu_alert2: cpu_alert2 {
 					temperature = <75000>;
 					hysteresis = <2000>;
+					type = "active";
+				};
+				cpu_warn2: cpu_warn2 {
+					temperature = <90000>;
+					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit2: trip1 {
+				cpu_crit2: cpu_crit2 {
 					temperature = <110000>;
 					hysteresis = <2000>;
 					type = "critical";
 				};
 			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert2>;
+					cooling-device = <&CPU2 THERMAL_NO_LIMIT 7>;
+				};
+				map1 {
+					trip = <&cpu_warn2>;
+					cooling-device = <&CPU2 8 THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		cpu-thermal3 {
@@ -226,9 +470,14 @@ 
 			thermal-sensors = <&tsens0 10>;
 
 			trips {
-				cpu_alert3: trip0 {
+				cpu_alert3: cpu_alert3 {
 					temperature = <75000>;
 					hysteresis = <2000>;
+					type = "active";
+				};
+				cpu_warn3: cpu_warn3 {
+					temperature = <90000>;
+					hysteresis = <2000>;
 					type = "passive";
 				};
 
@@ -238,6 +487,16 @@ 
 					type = "critical";
 				};
 			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert3>;
+					cooling-device = <&CPU2 THERMAL_NO_LIMIT 7>;
+				};
+				map1 {
+					trip = <&cpu_warn3>;
+					cooling-device = <&CPU2 8 THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 	};
 
@@ -414,7 +673,7 @@ 
 		};
 
 		kryocc: clock-controller@6400000 {
-			compatible = "qcom,apcc-msm8996";
+			compatible = "qcom,msm8996-apcc";
 			reg = <0x6400000 0x90000>;
 			#clock-cells = <1>;
 		};