@@ -33,6 +33,8 @@
#define SGMII_LINK_MAC_MAC_FORCED 2
#define SGMII_LINK_MAC_FIBER 3
#define SGMII_LINK_MAC_PHY_NO_MDIO 4
+#define RGMII_LINK_MAC_PHY 5
+#define RGMII_LINK_MAC_PHY_NO_MDIO 7
#define XGMII_LINK_MAC_PHY 10
#define XGMII_LINK_MAC_MAC_FORCED 11
@@ -2096,8 +2096,9 @@ static void netcp_ethss_link_state_action(struct gbe_priv *gbe_dev,
ALE_PORT_STATE_FORWARD);
if (ndev && slave->open &&
- slave->link_interface != SGMII_LINK_MAC_PHY &&
- slave->link_interface != XGMII_LINK_MAC_PHY)
+ ((slave->link_interface != SGMII_LINK_MAC_PHY) &&
+ (slave->link_interface != RGMII_LINK_MAC_PHY) &&
+ (slave->link_interface != XGMII_LINK_MAC_PHY)))
netif_carrier_on(ndev);
} else {
writel(mac_control, GBE_REG_ADDR(slave, emac_regs,
@@ -2106,8 +2107,9 @@ static void netcp_ethss_link_state_action(struct gbe_priv *gbe_dev,
ALE_PORT_STATE,
ALE_PORT_STATE_DISABLE);
if (ndev &&
- slave->link_interface != SGMII_LINK_MAC_PHY &&
- slave->link_interface != XGMII_LINK_MAC_PHY)
+ ((slave->link_interface != SGMII_LINK_MAC_PHY) &&
+ (slave->link_interface != RGMII_LINK_MAC_PHY) &&
+ (slave->link_interface != XGMII_LINK_MAC_PHY)))
netif_carrier_off(ndev);
}
@@ -2921,6 +2923,7 @@ static int init_slave(struct gbe_priv *gbe_dev, struct gbe_slave *slave,
slave->open = false;
if ((slave->link_interface == SGMII_LINK_MAC_PHY) ||
+ (slave->link_interface == RGMII_LINK_MAC_PHY) ||
(slave->link_interface == XGMII_LINK_MAC_PHY))
slave->phy_node = of_parse_phandle(node, "phy-handle", 0);
slave->port_num = gbe_get_slave_port(gbe_dev, slave->slave_num);
@@ -3082,6 +3085,9 @@ static void init_secondary_ports(struct gbe_priv *gbe_dev,
if (slave->link_interface == SGMII_LINK_MAC_PHY) {
phy_mode = PHY_INTERFACE_MODE_SGMII;
slave->phy_port_t = PORT_MII;
+ } else if (slave->link_interface == RGMII_LINK_MAC_PHY) {
+ phy_mode = PHY_INTERFACE_MODE_RGMII;
+ slave->phy_port_t = PORT_MII;
} else {
phy_mode = PHY_INTERFACE_MODE_NA;
slave->phy_port_t = PORT_FIBRE;
@@ -3089,6 +3095,7 @@ static void init_secondary_ports(struct gbe_priv *gbe_dev,
for_each_sec_slave(slave, gbe_dev) {
if ((slave->link_interface != SGMII_LINK_MAC_PHY) &&
+ (slave->link_interface != RGMII_LINK_MAC_PHY) &&
(slave->link_interface != XGMII_LINK_MAC_PHY))
continue;
slave->phy =
2u cpsw hardware on K2G uses rgmii link to interface with Phy. So add support for this interface in the code so that driver can be re-used for 2u hardware. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> --- drivers/net/ethernet/ti/netcp.h | 2 ++ drivers/net/ethernet/ti/netcp_ethss.c | 15 +++++++++++---- 2 files changed, 13 insertions(+), 4 deletions(-)