diff mbox

[1/3] ARM: dts: stm32: add USBPHYC support to stm32mp157c

Message ID 1524149996-27809-2-git-send-email-amelie.delaunay@st.com (mailing list archive)
State New, archived
Headers show

Commit Message

Amelie Delaunay April 19, 2018, 2:59 p.m. UTC 
Add support for USBPHYC (USB PHY Controller) to STM32MP157C SoC.
It manages two usb2 ports.

Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
---
 arch/arm/boot/dts/stm32mp157c.dtsi | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi
index bc3eddc..c64cac1 100644
--- a/arch/arm/boot/dts/stm32mp157c.dtsi
+++ b/arch/arm/boot/dts/stm32mp157c.dtsi
@@ -167,6 +167,26 @@ 
 			#reset-cells = <1>;
 		};
 
+		usbphyc: usbphyc@5a006000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32mp1-usbphyc";
+			reg = <0x5a006000 0x1000>;
+			clocks = <&rcc USBPHY_K>;
+			resets = <&rcc USBPHY_R>;
+			status = "disabled";
+
+			usbphyc_port0: usb-phy@0 {
+				#phy-cells = <0>;
+				reg = <0>;
+			};
+
+			usbphyc_port1: usb-phy@1 {
+				#phy-cells = <1>;
+				reg = <1>;
+			};
+		};
+
 		usart1: serial@5c000000 {
 			compatible = "st,stm32h7-uart";
 			reg = <0x5c000000 0x400>;