| Message ID | 1524812288-799-1-git-send-email-Anson.Huang@nxp.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Fri, Apr 27, 2018 at 02:58:08PM +0800, Anson Huang wrote: > There is a debug LED(D11) connected to GPIO1_IO24, add > support for it. > > Signed-off-by: Anson Huang <Anson.Huang@nxp.com> > --- > this patch is based on patch series (ARM: dts: imx6sx-sabreauto: add wdog external reset support). In this case, you can include these two patches into the series, if you need to resend the series. Shawn > arch/arm/boot/dts/imx6sx-sabreauto.dts | 18 ++++++++++++++++++ > 1 file changed, 18 insertions(+) > > diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts > index eb1452c..6b94f24 100644 > --- a/arch/arm/boot/dts/imx6sx-sabreauto.dts > +++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts > @@ -18,6 +18,18 @@ > reg = <0x80000000 0x80000000>; > }; > > + leds { > + compatible = "gpio-leds"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_led>; > + > + user { > + label = "debug"; > + gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; > + linux,default-trigger = "heartbeat"; > + }; > + }; > + > regulators { > compatible = "simple-bus"; > #address-cells = <1>; > @@ -119,6 +131,12 @@ > &iomuxc { > imx6x-sabreauto { > > + pinctrl_led: ledgrp { > + fsl,pins = < > + MX6SX_PAD_CSI_PIXCLK__GPIO1_IO_24 0x17059 > + >; > + }; > + Try to sort the pinctrl node alphabetically. Shawn > pinctrl_enet1_1: enet1grp-1 { > fsl,pins = < > MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0xa0b1 > -- > 2.7.4 >
diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts index eb1452c..6b94f24 100644 --- a/arch/arm/boot/dts/imx6sx-sabreauto.dts +++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts @@ -18,6 +18,18 @@ reg = <0x80000000 0x80000000>; }; + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led>; + + user { + label = "debug"; + gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + regulators { compatible = "simple-bus"; #address-cells = <1>; @@ -119,6 +131,12 @@ &iomuxc { imx6x-sabreauto { + pinctrl_led: ledgrp { + fsl,pins = < + MX6SX_PAD_CSI_PIXCLK__GPIO1_IO_24 0x17059 + >; + }; + pinctrl_enet1_1: enet1grp-1 { fsl,pins = < MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0xa0b1
There is a debug LED(D11) connected to GPIO1_IO24, add support for it. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> --- this patch is based on patch series (ARM: dts: imx6sx-sabreauto: add wdog external reset support). arch/arm/boot/dts/imx6sx-sabreauto.dts | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)