@@ -102,6 +102,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm47094-dlink-dir-885l.dtb \
bcm47094-linksys-panamera.dtb \
bcm47094-luxul-abr-4500.dtb \
+ bcm47094-luxul-xap-1610.dtb \
bcm47094-luxul-xbr-4500.dtb \
bcm47094-luxul-xwr-3100.dtb \
bcm47094-luxul-xwr-3150-v1.dtb \
new file mode 100644
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+
+/ {
+ compatible = "luxul,xap-1610-v1", "brcm,bcm47094", "brcm,bcm4708";
+ model = "Luxul XAP-1610 V1";
+
+ chosen {
+ bootargs = "earlycon";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "bcm53xx:green:status";
+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "timer";
+ };
+
+ 2ghz {
+ label = "bcm53xx:blue:2ghz";
+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+ };
+
+ 5ghz {
+ label = "bcm53xx:blue:5ghz";
+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&spi_nor {
+ status = "okay";
+};
It's an access point based on BCM47094 SoC with two BCM4366E wireless chipsets. Signed-off-by: Dan Haab <dan.haab@luxul.com> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts | 57 +++++++++++++++++++++++++++ 2 files changed, 58 insertions(+) create mode 100644 arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts