| Message ID | 1525602662-1873-1-git-send-email-okaya@codeaurora.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Sun, May 06, 2018 at 06:30:53AM -0400, Sinan Kaya wrote: > The QDF2400 controller does not set the Command Completed bit unless > writes to the Slot Command register change "Control" bits. Command > Completed is never set for writes that only change software notification > "Enable" bits. This results in timeouts like this: > > pciehp 0000:00:00.0:pcie004: Timeout on hotplug command 0x1038 > > Cc: stable@vger.kernel.org > Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index e70eba5..974a8f1 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -914,3 +914,9 @@ static void quirk_cmd_compl(struct pci_dev *pdev) } DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, PCI_CLASS_BRIDGE_PCI, 8, quirk_cmd_compl); + +DECLARE_PCI_FIXUP_CLASS_EARLY(0x17cb, 0x400, + PCI_CLASS_BRIDGE_PCI, 8, quirk_cmd_compl); + +DECLARE_PCI_FIXUP_CLASS_EARLY(0x17cb, 0x401, + PCI_CLASS_BRIDGE_PCI, 8, quirk_cmd_compl);
The QDF2400 controller does not set the Command Completed bit unless writes to the Slot Command register change "Control" bits. Command Completed is never set for writes that only change software notification "Enable" bits. This results in timeouts like this: pciehp 0000:00:00.0:pcie004: Timeout on hotplug command 0x1038 Cc: stable@vger.kernel.org Signed-off-by: Sinan Kaya <okaya@codeaurora.org> --- drivers/pci/hotplug/pciehp_hpc.c | 6 ++++++ 1 file changed, 6 insertions(+)