| Message ID | 1526899612-22856-2-git-send-email-ping.bai@nxp.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
> -----Original Message----- > From: Jacky Bai > Sent: Monday, May 21, 2018 6:47 PM > To: shawnguo@kernel.org; robh+dt@kernel.org; kernel@pengutronix.de > Cc: Fabio Estevam <fabio.estevam@nxp.com>; devicetree@vger.kernel.org; > linux-arm-kernel@lists.infradead.org; dl-linux-imx <linux-imx@nxp.com>; > A.s. Dong <aisheng.dong@nxp.com>; jacky.baip@gmail.com > Subject: [PATCH v6 2/2] ARM: dts: imx: Add basic dts support for imx6sll EVK > board > > Add dts file support for imx6sll EVK board. > > Signed-off-by: Bai Ping <ping.bai@nxp.com> > Reviewed-by: Rob Herring <robh@kernel.org> > --- > change v3->v4 > - update the license indentifier > - remove leading zero of node > - remove unused pin from hog group > change v4->v5 > - use generic name for device node > - remove unnecessary hog pin group > change v5->v6 > - no > --- > Documentation/devicetree/bindings/arm/fsl.txt | 4 + > arch/arm/boot/dts/Makefile | 2 + > arch/arm/boot/dts/imx6sll-evk.dts | 315 > ++++++++++++++++++++++++++ > 3 files changed, 321 insertions(+) > create mode 100644 arch/arm/boot/dts/imx6sll-evk.dts > > diff --git a/Documentation/devicetree/bindings/arm/fsl.txt > b/Documentation/devicetree/bindings/arm/fsl.txt > index cdb9dd7..8a1baa2 100644 > --- a/Documentation/devicetree/bindings/arm/fsl.txt > +++ b/Documentation/devicetree/bindings/arm/fsl.txt > @@ -53,6 +53,10 @@ i.MX6 Quad SABRE Automotive Board Required root > node properties: > - compatible = "fsl,imx6q-sabreauto", "fsl,imx6q"; > > +i.MX6SLL EVK board > +Required root node properties: > + - compatible = "fsl,imx6sll-evk", "fsl,imx6sll"; > + > Generic i.MX boards > ------------------- > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index f4753b0..f3fb85f 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -521,6 +521,8 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ > dtb-$(CONFIG_SOC_IMX6SL) += \ > imx6sl-evk.dtb \ > imx6sl-warp.dtb > +dtb-$(CONFIG_SOC_IMX6SLL) += \ > + imx6sll-evk.dtb > dtb-$(CONFIG_SOC_IMX6SX) += \ > imx6sx-nitrogen6sx.dtb \ > imx6sx-sabreauto.dtb \ > diff --git a/arch/arm/boot/dts/imx6sll-evk.dts b/arch/arm/boot/dts/imx6sll- > evk.dts > new file mode 100644 > index 0000000..0cfa4a2 > --- /dev/null > +++ b/arch/arm/boot/dts/imx6sll-evk.dts > @@ -0,0 +1,315 @@ > +// SPDX-License-Identifier: (GPL-2.0 OR MIT) > +/* > + * Copyright 2016 Freescale Semiconductor, Inc. > + * Copyright 2017-2018 NXP. > + * > + */ > + > +/dts-v1/; > + > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/input/input.h> > +#include "imx6sll.dtsi" > + > +/ { > + model = "Freescale i.MX6SLL EVK Board"; > + compatible = "fsl,imx6sll-evk", "fsl,imx6sll"; > + > + memory@80000000 { > + reg = <0x80000000 0x80000000>; > + }; > + > + backlight { > + compatible = "pwm-backlight"; > + pwms = <&pwm1 0 5000000>; > + brightness-levels = <0 4 8 16 32 64 128 255>; > + default-brightness-level = <6>; > + status = "okay"; > + }; > + > + reg_usb_otg1_vbus: regulator-otg1-vbus { > + compatible = "regulator-fixed"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usb_otg1_vbus>; > + regulator-name = "usb_otg1_vbus"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + }; > + > + reg_usb_otg2_vbus: regulator-otg2-vbus { > + compatible = "regulator-fixed"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usb_otg2_vbus>; > + regulator-name = "usb_otg2_vbus"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + }; > + > + reg_aud3v: regulator-aud3v { > + compatible = "regulator-fixed"; > + regulator-name = "wm8962-supply-3v15"; > + regulator-min-microvolt = <3150000>; > + regulator-max-microvolt = <3150000>; > + regulator-boot-on; > + }; > + > + reg_aud4v: regulator-aud4v { > + compatible = "regulator-fixed"; > + regulator-name = "wm8962-supply-4v2"; > + regulator-min-microvolt = <4325000>; > + regulator-max-microvolt = <4325000>; > + regulator-boot-on; > + }; > + > + reg_lcd: regulator-lcd { > + compatible = "regulator-fixed"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_reg_lcd>; > + regulator-name = "lcd-pwr"; > + gpio = <&gpio4 8 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + }; > + > + reg_sd1_vmmc: regulator-sd1-vmmc { > + compatible = "regulator-fixed"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_reg_sd1_vmmc>; > + regulator-name = "SD1_SPWR"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + }; > +}; > + > +&cpu0 { > + arm-supply = <&sw1a_reg>; > + soc-supply = <&sw1c_reg>; > +}; > + > +&i2c1 { > + clock-frequency = <100000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c1>; > + status = "okay"; > + > + pfuze100: pmic@8 { > + compatible = "fsl,pfuze100"; > + reg = <0x08>; > + > + regulators { > + sw1a_reg: sw1ab { > + regulator-min-microvolt = <300000>; > + regulator-max-microvolt = <1875000>; > + regulator-boot-on; > + regulator-always-on; > + regulator-ramp-delay = <6250>; > + }; > + > + sw1c_reg: sw1c { > + regulator-min-microvolt = <300000>; > + regulator-max-microvolt = <1875000>; > + regulator-boot-on; > + regulator-always-on; > + regulator-ramp-delay = <6250>; > + }; > + > + sw2_reg: sw2 { > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + sw3a_reg: sw3a { > + regulator-min-microvolt = <400000>; > + regulator-max-microvolt = <1975000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + sw3b_reg: sw3b { > + regulator-min-microvolt = <400000>; > + regulator-max-microvolt = <1975000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + sw4_reg: sw4 { > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <3300000>; > + }; > + > + swbst_reg: swbst { > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5150000>; > + }; > + > + snvs_reg: vsnvs { > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <3000000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + vref_reg: vrefddr { > + regulator-boot-on; > + regulator-always-on; > + }; > + > + vgen1_reg: vgen1 { > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <1550000>; > + regulator-always-on; > + }; > + > + vgen2_reg: vgen2 { > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <1550000>; > + }; > + > + vgen3_reg: vgen3 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + }; > + > + vgen4_reg: vgen4 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + vgen5_reg: vgen5 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + vgen6_reg: vgen6 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + }; > + }; > +}; > + > +&iomuxc { > + pinctrl_usb_otg1_vbus: vbus1grp { > + fsl,pins = < > + MX6SLL_PAD_KEY_COL4__GPIO4_IO00 0x17059 > + >; > + }; > + > + pinctrl_usb_otg2_vbus: vbus2grp { > + fsl,pins = < > + MX6SLL_PAD_KEY_COL5__GPIO4_IO02 0x17059 > + >; > + }; > + > + pinctrl_reg_lcd: reglcdgrp { > + fsl,pins = < > + MX6SLL_PAD_ECSPI1_SCLK__GPIO4_IO08 0x17059 > + >; > + }; > + > + pinctrl_reg_sd1_vmmc: sd1vmmcgrp { > + fsl,pins = < > + MX6SLL_PAD_KEY_COL3__GPIO3_IO30 0x17059 > + >; > + }; > + > + pinctrl_uart1: uart1grp { > + fsl,pins = < > + MX6SLL_PAD_UART1_TXD__UART1_DCE_TX > 0x1b0b1 > + MX6SLL_PAD_UART1_RXD__UART1_DCE_RX > 0x1b0b1 > + >; > + }; > + > + pinctrl_usdhc1: usdhc1grp { > + fsl,pins = < > + MX6SLL_PAD_SD1_CMD__SD1_CMD 0x17059 > + MX6SLL_PAD_SD1_CLK__SD1_CLK 0x13059 > + MX6SLL_PAD_SD1_DATA0__SD1_DATA0 > 0x17059 > + MX6SLL_PAD_SD1_DATA1__SD1_DATA1 > 0x17059 > + MX6SLL_PAD_SD1_DATA2__SD1_DATA2 > 0x17059 > + MX6SLL_PAD_SD1_DATA3__SD1_DATA3 > 0x17059 > + >; > + }; > + > + pinctrl_usdhc1_100mhz: usdhc1grp_100mhz { > + fsl,pins = < > + MX6SLL_PAD_SD1_CMD__SD1_CMD 0x170b9 > + MX6SLL_PAD_SD1_CLK__SD1_CLK 0x130b9 > + MX6SLL_PAD_SD1_DATA0__SD1_DATA0 > 0x170b9 > + MX6SLL_PAD_SD1_DATA1__SD1_DATA1 > 0x170b9 > + MX6SLL_PAD_SD1_DATA2__SD1_DATA2 > 0x170b9 > + MX6SLL_PAD_SD1_DATA3__SD1_DATA3 > 0x170b9 > + >; > + }; > + > + pinctrl_usdhc1_200mhz: usdhc1grp_200mhz { > + fsl,pins = < > + MX6SLL_PAD_SD1_CMD__SD1_CMD 0x170f9 > + MX6SLL_PAD_SD1_CLK__SD1_CLK 0x130f9 > + MX6SLL_PAD_SD1_DATA0__SD1_DATA0 > 0x170f9 > + MX6SLL_PAD_SD1_DATA1__SD1_DATA1 > 0x170f9 > + MX6SLL_PAD_SD1_DATA2__SD1_DATA2 > 0x170f9 > + MX6SLL_PAD_SD1_DATA3__SD1_DATA3 > 0x170f9 > + >; > + }; > + > + pinctrl_usbotg1: usbotg1grp { > + fsl,pins = < > + MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID > 0x17059 > + >; > + }; > + > + pinctrl_i2c1: i2c1grp { > + fsl,pins = < > + MX6SLL_PAD_I2C1_SCL__I2C1_SCL 0x4001b8b1 > + MX6SLL_PAD_I2C1_SDA__I2C1_SDA 0x4001b8b1 > + >; > + }; > +}; Due to iomux node usually may expend largely, we choose better to put iomux node at the end of this file to make other nodes easily looking. Acked-by: Dong Aisheng <Aisheng.dong@nxp.com> Regards Dong Aisheng > + > +&uart1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart1>; > + status = "okay"; > +}; > + > +&usdhc1 { > + pinctrl-names = "default", "state_100mhz", "state_200mhz"; > + pinctrl-0 = <&pinctrl_usdhc1>; > + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; > + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; > + cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; > + wp-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>; > + keep-power-in-suspend; > + wakeup-source; > + vmmc-supply = <®_sd1_vmmc>; > + status = "okay"; > +}; > + > +&usbotg1 { > + vbus-supply = <®_usb_otg1_vbus>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usbotg1>; > + disable-over-current; > + srp-disable; > + hnp-disable; > + adp-disable; > + status = "okay"; > +}; > + > +&usbotg2 { > + vbus-supply = <®_usb_otg2_vbus>; > + dr_mode = "host"; > + disable-over-current; > + status = "okay"; > +}; > -- > 1.9.1
diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt index cdb9dd7..8a1baa2 100644 --- a/Documentation/devicetree/bindings/arm/fsl.txt +++ b/Documentation/devicetree/bindings/arm/fsl.txt @@ -53,6 +53,10 @@ i.MX6 Quad SABRE Automotive Board Required root node properties: - compatible = "fsl,imx6q-sabreauto", "fsl,imx6q"; +i.MX6SLL EVK board +Required root node properties: + - compatible = "fsl,imx6sll-evk", "fsl,imx6sll"; + Generic i.MX boards ------------------- diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index f4753b0..f3fb85f 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -521,6 +521,8 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ dtb-$(CONFIG_SOC_IMX6SL) += \ imx6sl-evk.dtb \ imx6sl-warp.dtb +dtb-$(CONFIG_SOC_IMX6SLL) += \ + imx6sll-evk.dtb dtb-$(CONFIG_SOC_IMX6SX) += \ imx6sx-nitrogen6sx.dtb \ imx6sx-sabreauto.dtb \ diff --git a/arch/arm/boot/dts/imx6sll-evk.dts b/arch/arm/boot/dts/imx6sll-evk.dts new file mode 100644 index 0000000..0cfa4a2 --- /dev/null +++ b/arch/arm/boot/dts/imx6sll-evk.dts @@ -0,0 +1,315 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2016 Freescale Semiconductor, Inc. + * Copyright 2017-2018 NXP. + * + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "imx6sll.dtsi" + +/ { + model = "Freescale i.MX6SLL EVK Board"; + compatible = "fsl,imx6sll-evk", "fsl,imx6sll"; + + memory@80000000 { + reg = <0x80000000 0x80000000>; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + status = "okay"; + }; + + reg_usb_otg1_vbus: regulator-otg1-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1_vbus>; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg2_vbus: regulator-otg2-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg2_vbus>; + regulator-name = "usb_otg2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_aud3v: regulator-aud3v { + compatible = "regulator-fixed"; + regulator-name = "wm8962-supply-3v15"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + regulator-boot-on; + }; + + reg_aud4v: regulator-aud4v { + compatible = "regulator-fixed"; + regulator-name = "wm8962-supply-4v2"; + regulator-min-microvolt = <4325000>; + regulator-max-microvolt = <4325000>; + regulator-boot-on; + }; + + reg_lcd: regulator-lcd { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_lcd>; + regulator-name = "lcd-pwr"; + gpio = <&gpio4 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_sd1_vmmc: regulator-sd1-vmmc { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_sd1_vmmc>; + regulator-name = "SD1_SPWR"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&cpu0 { + arm-supply = <&sw1a_reg>; + soc-supply = <&sw1c_reg>; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pfuze100: pmic@8 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-always-on; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; +}; + +&iomuxc { + pinctrl_usb_otg1_vbus: vbus1grp { + fsl,pins = < + MX6SLL_PAD_KEY_COL4__GPIO4_IO00 0x17059 + >; + }; + + pinctrl_usb_otg2_vbus: vbus2grp { + fsl,pins = < + MX6SLL_PAD_KEY_COL5__GPIO4_IO02 0x17059 + >; + }; + + pinctrl_reg_lcd: reglcdgrp { + fsl,pins = < + MX6SLL_PAD_ECSPI1_SCLK__GPIO4_IO08 0x17059 + >; + }; + + pinctrl_reg_sd1_vmmc: sd1vmmcgrp { + fsl,pins = < + MX6SLL_PAD_KEY_COL3__GPIO3_IO30 0x17059 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x1b0b1 + MX6SLL_PAD_UART1_RXD__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6SLL_PAD_SD1_CMD__SD1_CMD 0x17059 + MX6SLL_PAD_SD1_CLK__SD1_CLK 0x13059 + MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x17059 + MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x17059 + MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x17059 + MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x17059 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp_100mhz { + fsl,pins = < + MX6SLL_PAD_SD1_CMD__SD1_CMD 0x170b9 + MX6SLL_PAD_SD1_CLK__SD1_CLK 0x130b9 + MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x170b9 + MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x170b9 + MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x170b9 + MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp_200mhz { + fsl,pins = < + MX6SLL_PAD_SD1_CMD__SD1_CMD 0x170f9 + MX6SLL_PAD_SD1_CLK__SD1_CLK 0x130f9 + MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x170f9 + MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x170f9 + MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x170f9 + MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x170f9 + >; + }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x17059 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6SLL_PAD_I2C1_SCL__I2C1_SCL 0x4001b8b1 + MX6SLL_PAD_I2C1_SDA__I2C1_SDA 0x4001b8b1 + >; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>; + keep-power-in-suspend; + wakeup-source; + vmmc-supply = <®_sd1_vmmc>; + status = "okay"; +}; + +&usbotg1 { + vbus-supply = <®_usb_otg1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1>; + disable-over-current; + srp-disable; + hnp-disable; + adp-disable; + status = "okay"; +}; + +&usbotg2 { + vbus-supply = <®_usb_otg2_vbus>; + dr_mode = "host"; + disable-over-current; + status = "okay"; +};