[v2,2/3] clk: bcm: Update and add Stingray clock entries

Message ID	1527726980-11723-3-git-send-email-ray.jui@broadcom.com (mailing list archive)
State	New, archived
Headers	show Return-Path: <linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org> From: Ray Jui <ray.jui@broadcom.com> To: Michael Turquette <mturquette@baylibre.com>, Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com> Subject: [PATCH v2 2/3] clk: bcm: Update and add Stingray clock entries Date: Wed, 30 May 2018 17:36:19 -0700 Message-Id: <1527726980-11723-3-git-send-email-ray.jui@broadcom.com> In-Reply-To: <1527726980-11723-1-git-send-email-ray.jui@broadcom.com> References: <1527726980-11723-1-git-send-email-ray.jui@broadcom.com> Precedence: list Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Pramod Kumar <pramod.kumar@broadcom.com>, bcm-kernel-feedback-list@broadcom.com, Ray Jui <ray.jui@broadcom.com>, linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-arm-kernel" <linux-arm-kernel-bounces@lists.infradead.org> Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org

diff --git a/drivers/clk/bcm/clk-sr.c b/drivers/clk/bcm/clk-sr.c index adc74f4..7b9efc0 100644 --- a/drivers/clk/bcm/clk-sr.c +++ b/drivers/clk/bcm/clk-sr.c @@ -56,8 +56,8 @@ static const struct iproc_pll_ctrl sr_genpll0 = { }; static const struct iproc_clk_ctrl sr_genpll0_clk[] = { - [BCM_SR_GENPLL0_SATA_CLK] = { - .channel = BCM_SR_GENPLL0_SATA_CLK, + [BCM_SR_GENPLL0_125M_CLK] = { + .channel = BCM_SR_GENPLL0_125M_CLK, .flags = IPROC_CLK_AON, .enable = ENABLE_VAL(0x4, 6, 0, 12), .mdiv = REG_VAL(0x18, 0, 9), @@ -102,6 +102,65 @@ static int sr_genpll0_clk_init(struct platform_device *pdev) return 0; } +static const struct iproc_pll_ctrl sr_genpll2 = { + .flags = IPROC_CLK_AON | IPROC_CLK_PLL_HAS_NDIV_FRAC | + IPROC_CLK_PLL_NEEDS_SW_CFG, + .aon = AON_VAL(0x0, 1, 13, 12), + .reset = RESET_VAL(0x0, 12, 11), + .dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 3), + .sw_ctrl = SW_CTRL_VAL(0x10, 31), + .ndiv_int = REG_VAL(0x10, 20, 10), + .ndiv_frac = REG_VAL(0x10, 0, 20), + .pdiv = REG_VAL(0x14, 0, 4), + .status = REG_VAL(0x30, 12, 1), +}; + +static const struct iproc_clk_ctrl sr_genpll2_clk[] = { + [BCM_SR_GENPLL2_NIC_CLK] = { + .channel = BCM_SR_GENPLL2_NIC_CLK, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x4, 6, 0, 12), + .mdiv = REG_VAL(0x18, 0, 9), + }, + [BCM_SR_GENPLL2_TS_500_CLK] = { + .channel = BCM_SR_GENPLL2_TS_500_CLK, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x4, 7, 1, 13), + .mdiv = REG_VAL(0x18, 10, 9), + }, + [BCM_SR_GENPLL2_125_NITRO_CLK] = { + .channel = BCM_SR_GENPLL2_125_NITRO_CLK, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x4, 8, 2, 14), + .mdiv = REG_VAL(0x18, 20, 9), + }, + [BCM_SR_GENPLL2_CHIMP_CLK] = { + .channel = BCM_SR_GENPLL2_CHIMP_CLK, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x4, 9, 3, 15), + .mdiv = REG_VAL(0x1c, 0, 9), + }, + [BCM_SR_GENPLL2_NIC_FLASH_CLK] = { + .channel = BCM_SR_GENPLL2_NIC_FLASH_CLK, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x4, 10, 4, 16), + .mdiv = REG_VAL(0x1c, 10, 9), + }, + [BCM_SR_GENPLL2_FS4_CLK] = { + .channel = BCM_SR_GENPLL2_FS4_CLK, + .enable = ENABLE_VAL(0x4, 11, 5, 17), + .mdiv = REG_VAL(0x1c, 20, 9), + }, +}; + +static int sr_genpll2_clk_init(struct platform_device *pdev) +{ + iproc_pll_clk_setup(pdev->dev.of_node, + &sr_genpll2, NULL, 0, sr_genpll2_clk, + ARRAY_SIZE(sr_genpll2_clk)); + return 0; +} + static const struct iproc_pll_ctrl sr_genpll3 = { .flags = IPROC_CLK_AON | IPROC_CLK_PLL_HAS_NDIV_FRAC | IPROC_CLK_PLL_NEEDS_SW_CFG, @@ -157,6 +216,30 @@ static const struct iproc_clk_ctrl sr_genpll4_clk[] = { .enable = ENABLE_VAL(0x4, 6, 0, 12), .mdiv = REG_VAL(0x18, 0, 9), }, + [BCM_SR_GENPLL4_TPIU_PLL_CLK] = { + .channel = BCM_SR_GENPLL4_TPIU_PLL_CLK, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x4, 7, 1, 13), + .mdiv = REG_VAL(0x18, 10, 9), + }, + [BCM_SR_GENPLL4_NOC_CLK] = { + .channel = BCM_SR_GENPLL4_NOC_CLK, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x4, 8, 2, 14), + .mdiv = REG_VAL(0x18, 20, 9), + }, + [BCM_SR_GENPLL4_CHCLK_FS4_CLK] = { + .channel = BCM_SR_GENPLL4_CHCLK_FS4_CLK, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x4, 9, 3, 15), + .mdiv = REG_VAL(0x1c, 0, 9), + }, + [BCM_SR_GENPLL4_BRIDGE_FSCPU_CLK] = { + .channel = BCM_SR_GENPLL4_BRIDGE_FSCPU_CLK, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x4, 10, 4, 16), + .mdiv = REG_VAL(0x1c, 10, 9), + }, }; static int sr_genpll4_clk_init(struct platform_device *pdev) @@ -181,18 +264,21 @@ static const struct iproc_pll_ctrl sr_genpll5 = { }; static const struct iproc_clk_ctrl sr_genpll5_clk[] = { - [BCM_SR_GENPLL5_FS_CLK] = { - .channel = BCM_SR_GENPLL5_FS_CLK, - .flags = IPROC_CLK_AON, + [BCM_SR_GENPLL5_FS4_HF_CLK] = { + .channel = BCM_SR_GENPLL5_FS4_HF_CLK, .enable = ENABLE_VAL(0x4, 6, 0, 12), .mdiv = REG_VAL(0x18, 0, 9), }, - [BCM_SR_GENPLL5_SPU_CLK] = { - .channel = BCM_SR_GENPLL5_SPU_CLK, - .flags = IPROC_CLK_AON, - .enable = ENABLE_VAL(0x4, 6, 0, 12), + [BCM_SR_GENPLL5_CRYPTO_AE_CLK] = { + .channel = BCM_SR_GENPLL5_CRYPTO_AE_CLK, + .enable = ENABLE_VAL(0x4, 7, 1, 12), .mdiv = REG_VAL(0x18, 10, 9), }, + [BCM_SR_GENPLL5_RAID_AE_CLK] = { + .channel = BCM_SR_GENPLL5_RAID_AE_CLK, + .enable = ENABLE_VAL(0x4, 8, 2, 14), + .mdiv = REG_VAL(0x18, 20, 9), + }, }; static int sr_genpll5_clk_init(struct platform_device *pdev) @@ -214,24 +300,30 @@ static const struct iproc_pll_ctrl sr_lcpll0 = { }; static const struct iproc_clk_ctrl sr_lcpll0_clk[] = { - [BCM_SR_LCPLL0_SATA_REF_CLK] = { - .channel = BCM_SR_LCPLL0_SATA_REF_CLK, + [BCM_SR_LCPLL0_SATA_REFP_CLK] = { + .channel = BCM_SR_LCPLL0_SATA_REFP_CLK, .flags = IPROC_CLK_AON, .enable = ENABLE_VAL(0x0, 7, 1, 13), .mdiv = REG_VAL(0x14, 0, 9), }, - [BCM_SR_LCPLL0_USB_REF_CLK] = { - .channel = BCM_SR_LCPLL0_USB_REF_CLK, + [BCM_SR_LCPLL0_SATA_REFN_CLK] = { + .channel = BCM_SR_LCPLL0_SATA_REFN_CLK, .flags = IPROC_CLK_AON, .enable = ENABLE_VAL(0x0, 8, 2, 14), .mdiv = REG_VAL(0x14, 10, 9), }, - [BCM_SR_LCPLL0_SATA_REFPN_CLK] = { - .channel = BCM_SR_LCPLL0_SATA_REFPN_CLK, + [BCM_SR_LCPLL0_SATA_350_CLK] = { + .channel = BCM_SR_LCPLL0_SATA_350_CLK, .flags = IPROC_CLK_AON, .enable = ENABLE_VAL(0x0, 9, 3, 15), .mdiv = REG_VAL(0x14, 20, 9), }, + [BCM_SR_LCPLL0_SATA_500_CLK] = { + .channel = BCM_SR_LCPLL0_SATA_500_CLK, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x0, 10, 4, 16), + .mdiv = REG_VAL(0x18, 0, 9), + }, }; static int sr_lcpll0_clk_init(struct platform_device *pdev) @@ -259,6 +351,18 @@ static const struct iproc_clk_ctrl sr_lcpll1_clk[] = { .enable = ENABLE_VAL(0x0, 7, 1, 13), .mdiv = REG_VAL(0x14, 0, 9), }, + [BCM_SR_LCPLL1_USB_REF_CLK] = { + .channel = BCM_SR_LCPLL1_USB_REF_CLK, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x0, 8, 2, 14), + .mdiv = REG_VAL(0x14, 10, 9), + }, + [BCM_SR_LCPLL1_CRMU_TS_CLK] = { + .channel = BCM_SR_LCPLL1_CRMU_TS_CLK, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x0, 9, 3, 15), + .mdiv = REG_VAL(0x14, 20, 9), + }, }; static int sr_lcpll1_clk_init(struct platform_device *pdev) @@ -298,6 +402,7 @@ static int sr_lcpll_pcie_clk_init(struct platform_device *pdev) static const struct of_device_id sr_clk_dt_ids[] = { { .compatible = "brcm,sr-genpll0", .data = sr_genpll0_clk_init }, + { .compatible = "brcm,sr-genpll2", .data = sr_genpll2_clk_init }, { .compatible = "brcm,sr-genpll4", .data = sr_genpll4_clk_init }, { .compatible = "brcm,sr-genpll5", .data = sr_genpll5_clk_init }, { .compatible = "brcm,sr-lcpll0", .data = sr_lcpll0_clk_init }, diff --git a/include/dt-bindings/clock/bcm-sr.h b/include/dt-bindings/clock/bcm-sr.h index cff6c6f..419011b 100644 --- a/include/dt-bindings/clock/bcm-sr.h +++ b/include/dt-bindings/clock/bcm-sr.h @@ -35,7 +35,7 @@ /* GENPLL 0 clock channel ID SCR HSLS FS PCIE */ #define BCM_SR_GENPLL0 0 -#define BCM_SR_GENPLL0_SATA_CLK 1 +#define BCM_SR_GENPLL0_125M_CLK 1 #define BCM_SR_GENPLL0_SCR_CLK 2 #define BCM_SR_GENPLL0_250M_CLK 3 #define BCM_SR_GENPLL0_PCIE_AXI_CLK 4 @@ -50,9 +50,11 @@ /* GENPLL 2 clock channel ID NITRO MHB*/ #define BCM_SR_GENPLL2 0 #define BCM_SR_GENPLL2_NIC_CLK 1 -#define BCM_SR_GENPLL2_250_NITRO_CLK 2 +#define BCM_SR_GENPLL2_TS_500_CLK 2 #define BCM_SR_GENPLL2_125_NITRO_CLK 3 #define BCM_SR_GENPLL2_CHIMP_CLK 4 +#define BCM_SR_GENPLL2_NIC_FLASH_CLK 5 +#define BCM_SR_GENPLL2_FS4_CLK 6 /* GENPLL 3 HSLS clock channel ID */ #define BCM_SR_GENPLL3 0 @@ -62,11 +64,16 @@ /* GENPLL 4 SCR clock channel ID */ #define BCM_SR_GENPLL4 0 #define BCM_SR_GENPLL4_CCN_CLK 1 +#define BCM_SR_GENPLL4_TPIU_PLL_CLK 2 +#define BCM_SR_GENPLL4_NOC_CLK 3 +#define BCM_SR_GENPLL4_CHCLK_FS4_CLK 4 +#define BCM_SR_GENPLL4_BRIDGE_FSCPU_CLK 5 /* GENPLL 5 FS4 clock channel ID */ #define BCM_SR_GENPLL5 0 -#define BCM_SR_GENPLL5_FS_CLK 1 -#define BCM_SR_GENPLL5_SPU_CLK 2 +#define BCM_SR_GENPLL5_FS4_HF_CLK 1 +#define BCM_SR_GENPLL5_CRYPTO_AE_CLK 2 +#define BCM_SR_GENPLL5_RAID_AE_CLK 3 /* GENPLL 6 NITRO clock channel ID */ #define BCM_SR_GENPLL6 0 @@ -74,13 +81,16 @@ /* LCPLL0 clock channel ID */ #define BCM_SR_LCPLL0 0 -#define BCM_SR_LCPLL0_SATA_REF_CLK 1 -#define BCM_SR_LCPLL0_USB_REF_CLK 2 -#define BCM_SR_LCPLL0_SATA_REFPN_CLK 3 +#define BCM_SR_LCPLL0_SATA_REFP_CLK 1 +#define BCM_SR_LCPLL0_SATA_REFN_CLK 2 +#define BCM_SR_LCPLL0_SATA_350_CLK 3 +#define BCM_SR_LCPLL0_SATA_500_CLK 4 /* LCPLL1 clock channel ID */ #define BCM_SR_LCPLL1 0 #define BCM_SR_LCPLL1_WAN_CLK 1 +#define BCM_SR_LCPLL1_USB_REF_CLK 2 +#define BCM_SR_LCPLL1_CRMU_TS_CLK 3 /* LCPLL PCIE clock channel ID */ #define BCM_SR_LCPLL_PCIE 0

[v2,2/3] clk: bcm: Update and add Stingray clock entries

Commit Message

Patch