diff mbox

[14/19] mmc: mmci: add clock divider for stm32 sdmmc

Message ID 1528809280-31116-15-git-send-email-ludovic.Barre@st.com (mailing list archive)
State New, archived
Headers show

Commit Message

Ludovic BARRE June 12, 2018, 1:14 p.m. UTC 
From: Ludovic Barre <ludovic.barre@st.com>

The STM32 sdmmc variant has a different clock divider.

Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
---
 drivers/mmc/host/mmci.c | 2 ++
 drivers/mmc/host/mmci.h | 2 ++
 2 files changed, 4 insertions(+)
diff mbox

Patch

diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 9af7db8..e24fd1e 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -1451,6 +1451,8 @@  static int mmci_probe(struct amba_device *dev,
 	 */
 	if (variant->st_clkdiv)
 		mmc->f_min = DIV_ROUND_UP(host->mclk, 257);
+	else if (variant->stm32_clkdiv)
+		mmc->f_min = DIV_ROUND_UP(host->mclk, 2046);
 	else if (variant->explicit_mclk_control)
 		mmc->f_min = clk_round_rate(host->clk, 100000);
 	else
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index 4b4cd1d..227927e 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -252,6 +252,7 @@  struct mmci_host;
  * @data_cmd_enable: enable value for data commands.
  * @st_sdio: enable ST specific SDIO logic
  * @st_clkdiv: true if using a ST-specific clock divider algorithm
+ * @stm32_clkdiv: true if using a STM32-specific clock divider algorithm
  * @datactrl_mask_ddrmode: ddr mode mask in datactrl register.
  * @blksz_datactrl16: true if Block size is at b16..b30 position in datactrl
  *                    register
@@ -312,6 +313,7 @@  struct variant_data {
 	bool			datacnt_remain;
 	bool			st_sdio;
 	bool			st_clkdiv;
+	bool			stm32_clkdiv;
 	bool			blksz_datactrl16;
 	bool			blksz_datactrl4;
 	u32			pwrreg_powerup;