@@ -44,8 +44,6 @@ struct prev_kprobe {
struct kprobe_ctlblk {
unsigned int kprobe_status;
struct prev_kprobe prev_kprobe;
- struct pt_regs jprobe_saved_regs;
- char jprobes_stack[MAX_STACK_SIZE];
};
void arch_remove_kprobe(struct kprobe *);
@@ -51,7 +51,6 @@ struct arch_probes_insn {
* We assume one instruction can consume at most 64 bytes stack, which is
* 'push {r0-r15}'. Instructions consume more or unknown stack space like
* 'str r0, [sp, #-80]' and 'str r0, [sp, r1]' should be prohibit to probe.
- * Both kprobe and jprobe use this macro.
*/
#define MAX_STACK_SIZE 64
@@ -47,9 +47,6 @@
(unsigned long)(addr) + \
(size))
-/* Used as a marker in ARM_pc to note when we're in a jprobe. */
-#define JPROBE_MAGIC_ADDR 0xffffffff
-
DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL;
DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
@@ -521,117 +518,6 @@ void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
regs->ARM_lr = (unsigned long)&kretprobe_trampoline;
}
-int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
-{
- struct jprobe *jp = container_of(p, struct jprobe, kp);
- struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
- long sp_addr = regs->ARM_sp;
- long cpsr;
-
- kcb->jprobe_saved_regs = *regs;
- memcpy(kcb->jprobes_stack, (void *)sp_addr, MIN_STACK_SIZE(sp_addr));
- regs->ARM_pc = (long)jp->entry;
-
- cpsr = regs->ARM_cpsr | PSR_I_BIT;
-#ifdef CONFIG_THUMB2_KERNEL
- /* Set correct Thumb state in cpsr */
- if (regs->ARM_pc & 1)
- cpsr |= PSR_T_BIT;
- else
- cpsr &= ~PSR_T_BIT;
-#endif
- regs->ARM_cpsr = cpsr;
-
- preempt_disable();
- return 1;
-}
-
-void __kprobes jprobe_return(void)
-{
- struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
-
- __asm__ __volatile__ (
- /*
- * Setup an empty pt_regs. Fill SP and PC fields as
- * they're needed by longjmp_break_handler.
- *
- * We allocate some slack between the original SP and start of
- * our fabricated regs. To be precise we want to have worst case
- * covered which is STMFD with all 16 regs so we allocate 2 *
- * sizeof(struct_pt_regs)).
- *
- * This is to prevent any simulated instruction from writing
- * over the regs when they are accessing the stack.
- */
-#ifdef CONFIG_THUMB2_KERNEL
- "sub r0, %0, %1 \n\t"
- "mov sp, r0 \n\t"
-#else
- "sub sp, %0, %1 \n\t"
-#endif
- "ldr r0, ="__stringify(JPROBE_MAGIC_ADDR)"\n\t"
- "str %0, [sp, %2] \n\t"
- "str r0, [sp, %3] \n\t"
- "mov r0, sp \n\t"
- "bl kprobe_handler \n\t"
-
- /*
- * Return to the context saved by setjmp_pre_handler
- * and restored by longjmp_break_handler.
- */
-#ifdef CONFIG_THUMB2_KERNEL
- "ldr lr, [sp, %2] \n\t" /* lr = saved sp */
- "ldrd r0, r1, [sp, %5] \n\t" /* r0,r1 = saved lr,pc */
- "ldr r2, [sp, %4] \n\t" /* r2 = saved psr */
- "stmdb lr!, {r0, r1, r2} \n\t" /* push saved lr and */
- /* rfe context */
- "ldmia sp, {r0 - r12} \n\t"
- "mov sp, lr \n\t"
- "ldr lr, [sp], #4 \n\t"
- "rfeia sp! \n\t"
-#else
- "ldr r0, [sp, %4] \n\t"
- "msr cpsr_cxsf, r0 \n\t"
- "ldmia sp, {r0 - pc} \n\t"
-#endif
- :
- : "r" (kcb->jprobe_saved_regs.ARM_sp),
- "I" (sizeof(struct pt_regs) * 2),
- "J" (offsetof(struct pt_regs, ARM_sp)),
- "J" (offsetof(struct pt_regs, ARM_pc)),
- "J" (offsetof(struct pt_regs, ARM_cpsr)),
- "J" (offsetof(struct pt_regs, ARM_lr))
- : "memory", "cc");
-}
-
-int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
-{
- struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
- long stack_addr = kcb->jprobe_saved_regs.ARM_sp;
- long orig_sp = regs->ARM_sp;
- struct jprobe *jp = container_of(p, struct jprobe, kp);
-
- if (regs->ARM_pc == JPROBE_MAGIC_ADDR) {
- if (orig_sp != stack_addr) {
- struct pt_regs *saved_regs =
- (struct pt_regs *)kcb->jprobe_saved_regs.ARM_sp;
- printk("current sp %lx does not match saved sp %lx\n",
- orig_sp, stack_addr);
- printk("Saved registers for jprobe %p\n", jp);
- show_regs(saved_regs);
- printk("Current registers\n");
- show_regs(regs);
- BUG();
- }
- *regs = kcb->jprobe_saved_regs;
- memcpy((void *)stack_addr, kcb->jprobes_stack,
- MIN_STACK_SIZE(stack_addr));
- preempt_enable_no_resched();
- return 1;
- }
- return 0;
-}
-
int __kprobes arch_trampoline_kprobe(struct kprobe *p)
{
return 0;
Remove arch dependent setjump/longjump functions and unused fields in kprobe_ctlblk for jprobes from arch/arm. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: linux-arm-kernel@lists.infradead.org --- arch/arm/include/asm/kprobes.h | 2 - arch/arm/include/asm/probes.h | 1 arch/arm/probes/kprobes/core.c | 114 ---------------------------------------- 3 files changed, 117 deletions(-)