diff mbox

[2/2] clk: uniphier: add more USB3 PHY clocks

Message ID 1532075856-1723-2-git-send-email-yamada.masahiro@socionext.com (mailing list archive)
State New, archived
Headers show

Commit Message

Masahiro Yamada July 20, 2018, 8:37 a.m. UTC 
Add USB3 PHY clocks where missing.  Use fixed-factor clocks for those
without gating.

For clarification, prefix clock names with 'ss' or 'hs'.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---

 drivers/clk/uniphier/clk-uniphier-sys.c | 26 +++++++++++++++++---------
 1 file changed, 17 insertions(+), 9 deletions(-)

Comments

Stephen Boyd July 25, 2018, 11:23 p.m. UTC | #1 
Quoting Masahiro Yamada (2018-07-20 01:37:36)
> Add USB3 PHY clocks where missing.  Use fixed-factor clocks for those
> without gating.
> 
> For clarification, prefix clock names with 'ss' or 'hs'.
> 
> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
> ---

Applied to clk-next
diff mbox

Patch

diff --git a/drivers/clk/uniphier/clk-uniphier-sys.c b/drivers/clk/uniphier/clk-uniphier-sys.c
index a582446..1c5a998 100644
--- a/drivers/clk/uniphier/clk-uniphier-sys.c
+++ b/drivers/clk/uniphier/clk-uniphier-sys.c
@@ -122,6 +122,9 @@  const struct uniphier_clk_data uniphier_pro4_sys_clk_data[] = {
 	UNIPHIER_PRO4_SYS_CLK_GIO(12),			/* Ether, SATA, USB3 */
 	UNIPHIER_PRO4_SYS_CLK_USB3(14, 0),
 	UNIPHIER_PRO4_SYS_CLK_USB3(15, 1),
+	UNIPHIER_CLK_FACTOR("usb30-hsphy0", 16, "upll", 1, 12),
+	UNIPHIER_CLK_FACTOR("usb30-ssphy0", 17, "ref", 1, 1),
+	UNIPHIER_CLK_FACTOR("usb31-ssphy0", 20, "ref", 1, 1),
 	UNIPHIER_CLK_GATE("sata0", 28, NULL, 0x2104, 18),
 	UNIPHIER_CLK_GATE("sata1", 29, NULL, 0x2104, 19),
 	UNIPHIER_PRO4_SYS_CLK_AIO(40),
@@ -173,8 +176,11 @@  const struct uniphier_clk_data uniphier_pxs2_sys_clk_data[] = {
 	UNIPHIER_PRO4_SYS_CLK_USB3(14, 0),
 	UNIPHIER_PRO4_SYS_CLK_USB3(15, 1),
 	/* The document mentions 0x2104 bit 18, but not functional */
-	UNIPHIER_CLK_GATE("usb30-phy", 16, NULL, 0x2104, 19),
-	UNIPHIER_CLK_GATE("usb31-phy", 20, NULL, 0x2104, 20),
+	UNIPHIER_CLK_GATE("usb30-hsphy0", 16, NULL, 0x2104, 19),
+	UNIPHIER_CLK_FACTOR("usb30-ssphy0", 17, "ref", 1, 1),
+	UNIPHIER_CLK_FACTOR("usb30-ssphy1", 18, "ref", 1, 1),
+	UNIPHIER_CLK_GATE("usb31-hsphy0", 20, NULL, 0x2104, 20),
+	UNIPHIER_CLK_FACTOR("usb31-ssphy0", 21, "ref", 1, 1),
 	UNIPHIER_CLK_GATE("sata0", 28, NULL, 0x2104, 22),
 	UNIPHIER_PRO5_SYS_CLK_AIO(40),
 	{ /* sentinel */ }
@@ -235,8 +241,10 @@  const struct uniphier_clk_data uniphier_ld20_sys_clk_data[] = {
 	 * We do not use bit 15 here.
 	 */
 	UNIPHIER_CLK_GATE("usb30", 14, NULL, 0x210c, 14),
-	UNIPHIER_CLK_GATE("usb30-phy0", 16, NULL, 0x210c, 12),
-	UNIPHIER_CLK_GATE("usb30-phy1", 17, NULL, 0x210c, 13),
+	UNIPHIER_CLK_GATE("usb30-hsphy0", 16, NULL, 0x210c, 12),
+	UNIPHIER_CLK_GATE("usb30-hsphy1", 17, NULL, 0x210c, 13),
+	UNIPHIER_CLK_FACTOR("usb30-ssphy0", 18, "ref", 1, 1),
+	UNIPHIER_CLK_FACTOR("usb30-ssphy1", 19, "ref", 1, 1),
 	UNIPHIER_CLK_GATE("pcie", 24, NULL, 0x210c, 4),
 	UNIPHIER_LD11_SYS_CLK_AIO(40),
 	UNIPHIER_LD11_SYS_CLK_EVEA(41),
@@ -272,11 +280,11 @@  const struct uniphier_clk_data uniphier_pxs3_sys_clk_data[] = {
 	UNIPHIER_CLK_GATE("usb30", 12, NULL, 0x210c, 4),	/* =GIO0 */
 	UNIPHIER_CLK_GATE("usb31-0", 13, NULL, 0x210c, 5),	/* =GIO1 */
 	UNIPHIER_CLK_GATE("usb31-1", 14, NULL, 0x210c, 6),	/* =GIO1-1 */
-	UNIPHIER_CLK_GATE("usb30-phy0", 16, NULL, 0x210c, 16),
-	UNIPHIER_CLK_GATE("usb30-phy1", 17, NULL, 0x210c, 18),
-	UNIPHIER_CLK_GATE("usb30-phy2", 18, NULL, 0x210c, 20),
-	UNIPHIER_CLK_GATE("usb31-phy0", 20, NULL, 0x210c, 17),
-	UNIPHIER_CLK_GATE("usb31-phy1", 21, NULL, 0x210c, 19),
+	UNIPHIER_CLK_GATE("usb30-hsphy0", 16, NULL, 0x210c, 16),
+	UNIPHIER_CLK_GATE("usb30-ssphy0", 17, NULL, 0x210c, 18),
+	UNIPHIER_CLK_GATE("usb30-ssphy1", 18, NULL, 0x210c, 20),
+	UNIPHIER_CLK_GATE("usb31-hsphy0", 20, NULL, 0x210c, 17),
+	UNIPHIER_CLK_GATE("usb31-ssphy0", 21, NULL, 0x210c, 19),
 	UNIPHIER_CLK_GATE("pcie", 24, NULL, 0x210c, 3),
 	UNIPHIER_CLK_GATE("sata0", 28, NULL, 0x210c, 7),
 	UNIPHIER_CLK_GATE("sata1", 29, NULL, 0x210c, 8),