@@ -6,6 +6,7 @@ source "drivers/soc/atmel/Kconfig"
source "drivers/soc/bcm/Kconfig"
source "drivers/soc/fsl/Kconfig"
source "drivers/soc/imx/Kconfig"
+source "drivers/soc/marvell/Kconfig"
source "drivers/soc/mediatek/Kconfig"
source "drivers/soc/qcom/Kconfig"
source "drivers/soc/renesas/Kconfig"
@@ -12,6 +12,7 @@ obj-y += fsl/
obj-$(CONFIG_ARCH_GEMINI) += gemini/
obj-$(CONFIG_ARCH_MXC) += imx/
obj-$(CONFIG_SOC_XWAY) += lantiq/
+obj-y += marvell/
obj-y += mediatek/
obj-$(CONFIG_ARCH_MESON) += amlogic/
obj-y += qcom/
new file mode 100644
@@ -0,0 +1,13 @@
+#
+# MARVELL SoC drivers
+#
+
+menu "Marvell SoC drivers"
+
+config OCTEONTX2_AF
+ tristate "OcteonTX2 RVU Admin Function driver"
+ depends on ARM64 && PCI
+ help
+ This driver supports Marvell's OcteonTX2 Resource Virtualization
+ Unit's admin function manager which manages all RVU HW resources.
+endmenu
new file mode 100644
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-y += octeontx2/
new file mode 100644
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for Marvell's OcteonTX2 RVU Admin Function driver
+#
+
+obj-$(CONFIG_OCTEONTX2_AF) += octeontx2_af.o
+
+octeontx2_af-y := rvu.o
new file mode 100644
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Marvell OcteonTx2 RVU Admin Function driver
+ *
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/pci.h>
+#include <linux/sysfs.h>
+
+#include "rvu.h"
+
+#define DRV_NAME "octeontx2-af"
+#define DRV_STRING "Marvell OcteonTX2 RVU Admin Function Driver"
+#define DRV_VERSION "1.0"
+
+/* Supported devices */
+static const struct pci_device_id rvu_id_table[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, PCI_DEVID_OCTEONTX2_RVU_AF) },
+ { 0, } /* end of table */
+};
+
+MODULE_AUTHOR("Marvell International Ltd.");
+MODULE_DESCRIPTION(DRV_STRING);
+MODULE_LICENSE("GPL v2");
+MODULE_VERSION(DRV_VERSION);
+MODULE_DEVICE_TABLE(pci, rvu_id_table);
+
+static int rvu_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ struct device *dev = &pdev->dev;
+ struct rvu *rvu;
+ int err;
+
+ rvu = devm_kzalloc(dev, sizeof(*rvu), GFP_KERNEL);
+ if (!rvu)
+ return -ENOMEM;
+
+ pci_set_drvdata(pdev, rvu);
+ rvu->pdev = pdev;
+ rvu->dev = &pdev->dev;
+
+ err = pci_enable_device(pdev);
+ if (err) {
+ dev_err(dev, "Failed to enable PCI device\n");
+ goto err_freemem;
+ }
+
+ err = pci_request_regions(pdev, DRV_NAME);
+ if (err) {
+ dev_err(dev, "PCI request regions failed 0x%x\n", err);
+ goto err_disable_device;
+ }
+
+ err = pci_set_dma_mask(pdev, DMA_BIT_MASK(48));
+ if (err) {
+ dev_err(dev, "Unable to set DMA mask\n");
+ goto err_release_regions;
+ }
+
+ err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(48));
+ if (err) {
+ dev_err(dev, "Unable to set consistent DMA mask\n");
+ goto err_release_regions;
+ }
+
+ /* Map Admin function CSRs */
+ rvu->afreg_base = pcim_iomap(pdev, PCI_AF_REG_BAR_NUM, 0);
+ rvu->pfreg_base = pcim_iomap(pdev, PCI_PF_REG_BAR_NUM, 0);
+ if (!rvu->afreg_base || !rvu->pfreg_base) {
+ dev_err(dev, "Unable to map admin function CSRs, aborting\n");
+ err = -ENOMEM;
+ goto err_release_regions;
+ }
+
+ return 0;
+
+err_release_regions:
+ pci_release_regions(pdev);
+err_disable_device:
+ pci_disable_device(pdev);
+err_freemem:
+ pci_set_drvdata(pdev, NULL);
+ devm_kfree(dev, rvu);
+ return err;
+}
+
+static void rvu_remove(struct pci_dev *pdev)
+{
+ struct rvu *rvu = pci_get_drvdata(pdev);
+
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ pci_set_drvdata(pdev, NULL);
+
+ devm_kfree(&pdev->dev, rvu);
+}
+
+static struct pci_driver rvu_driver = {
+ .name = DRV_NAME,
+ .id_table = rvu_id_table,
+ .probe = rvu_probe,
+ .remove = rvu_remove,
+};
+
+static int __init rvu_init_module(void)
+{
+ pr_info("%s: %s\n", DRV_NAME, DRV_STRING);
+
+ return pci_register_driver(&rvu_driver);
+}
+
+static void __exit rvu_cleanup_module(void)
+{
+ pci_unregister_driver(&rvu_driver);
+}
+
+module_init(rvu_init_module);
+module_exit(rvu_cleanup_module);
new file mode 100644
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0
+ * Marvell OcteonTx2 RVU Admin Function driver
+ *
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef RVU_H
+#define RVU_H
+
+/* PCI device IDs */
+#define PCI_DEVID_OCTEONTX2_RVU_AF 0xA065
+
+/* PCI BAR nos */
+#define PCI_AF_REG_BAR_NUM 0
+#define PCI_PF_REG_BAR_NUM 2
+#define PCI_MBOX_BAR_NUM 4
+
+#define NAME_SIZE 32
+
+struct rvu {
+ void __iomem *afreg_base;
+ void __iomem *pfreg_base;
+ struct pci_dev *pdev;
+ struct device *dev;
+};
+
+#endif /* RVU_H */