@@ -16,6 +16,7 @@
#include <linux/sysfs.h>
#include "rvu.h"
+#include "rvu_reg.h"
#define DRV_NAME "octeontx2-af"
#define DRV_STRING "Marvell OcteonTX2 RVU Admin Function Driver"
@@ -33,6 +34,70 @@ MODULE_LICENSE("GPL v2");
MODULE_VERSION(DRV_VERSION);
MODULE_DEVICE_TABLE(pci, rvu_id_table);
+/* Poll a RVU block's register 'offset', for a 'zero'
+ * or 'nonzero' at bits specified by 'mask'
+ */
+int rvu_poll_reg(struct rvu *rvu, u64 block, u64 offset, u64 mask, bool zero)
+{
+ void __iomem *reg;
+ int timeout = 100;
+ u64 reg_val;
+
+ reg = rvu->afreg_base + ((block << 28) | offset);
+ while (timeout) {
+ reg_val = readq(reg);
+ if (zero && !(reg_val & mask))
+ return 0;
+ if (!zero && (reg_val & mask))
+ return 0;
+ udelay(1);
+ cpu_relax();
+ timeout--;
+ }
+ return -EBUSY;
+}
+
+static void rvu_check_block_implemented(struct rvu *rvu)
+{
+ struct rvu_hwinfo *hw = rvu->hw;
+ struct rvu_block *block;
+ int blkid;
+ u64 cfg;
+
+ /* For each block check if 'implemented' bit is set */
+ for (blkid = 0; blkid < BLK_COUNT; blkid++) {
+ block = &hw->block[blkid];
+ cfg = rvupf_read64(rvu, RVU_PF_BLOCK_ADDRX_DISC(blkid));
+ if (cfg & BIT_ULL(11))
+ block->implemented = true;
+ }
+}
+
+static void rvu_block_reset(struct rvu *rvu, int blkaddr, u64 rst_reg)
+{
+ struct rvu_block *block = &rvu->hw->block[blkaddr];
+
+ if (!block->implemented)
+ return;
+
+ rvu_write64(rvu, blkaddr, rst_reg, BIT_ULL(0));
+ rvu_poll_reg(rvu, blkaddr, rst_reg, BIT_ULL(63), true);
+}
+
+static void rvu_reset_all_blocks(struct rvu *rvu)
+{
+ /* Do a HW reset of all RVU blocks */
+ rvu_block_reset(rvu, BLKADDR_NPA, NPA_AF_BLK_RST);
+ rvu_block_reset(rvu, BLKADDR_NIX0, NIX_AF_BLK_RST);
+ rvu_block_reset(rvu, BLKADDR_NPC, NPC_AF_BLK_RST);
+ rvu_block_reset(rvu, BLKADDR_SSO, SSO_AF_BLK_RST);
+ rvu_block_reset(rvu, BLKADDR_TIM, TIM_AF_BLK_RST);
+ rvu_block_reset(rvu, BLKADDR_CPT0, CPT_AF_BLK_RST);
+ rvu_block_reset(rvu, BLKADDR_NDC0, NDC_AF_BLK_RST);
+ rvu_block_reset(rvu, BLKADDR_NDC1, NDC_AF_BLK_RST);
+ rvu_block_reset(rvu, BLKADDR_NDC2, NDC_AF_BLK_RST);
+}
+
static int rvu_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
struct device *dev = &pdev->dev;
@@ -43,6 +108,12 @@ static int rvu_probe(struct pci_dev *pdev, const struct pci_device_id *id)
if (!rvu)
return -ENOMEM;
+ rvu->hw = devm_kzalloc(dev, sizeof(struct rvu_hwinfo), GFP_KERNEL);
+ if (!rvu->hw) {
+ devm_kfree(dev, rvu);
+ return -ENOMEM;
+ }
+
pci_set_drvdata(pdev, rvu);
rvu->pdev = pdev;
rvu->dev = &pdev->dev;
@@ -80,6 +151,11 @@ static int rvu_probe(struct pci_dev *pdev, const struct pci_device_id *id)
goto err_release_regions;
}
+ /* Check which blocks the HW supports */
+ rvu_check_block_implemented(rvu);
+
+ rvu_reset_all_blocks(rvu);
+
return 0;
err_release_regions:
@@ -88,6 +164,7 @@ static int rvu_probe(struct pci_dev *pdev, const struct pci_device_id *id)
pci_disable_device(pdev);
err_freemem:
pci_set_drvdata(pdev, NULL);
+ devm_kfree(&pdev->dev, rvu->hw);
devm_kfree(dev, rvu);
return err;
}
@@ -100,6 +177,7 @@ static void rvu_remove(struct pci_dev *pdev)
pci_disable_device(pdev);
pci_set_drvdata(pdev, NULL);
+ devm_kfree(&pdev->dev, rvu->hw);
devm_kfree(&pdev->dev, rvu);
}
@@ -11,6 +11,8 @@
#ifndef RVU_H
#define RVU_H
+#include "rvu_struct.h"
+
/* PCI device IDs */
#define PCI_DEVID_OCTEONTX2_RVU_AF 0xA065
@@ -21,11 +23,46 @@
#define NAME_SIZE 32
+struct rvu_block {
+ bool implemented;
+};
+
+struct rvu_hwinfo {
+ struct rvu_block block[BLK_COUNT]; /* Block info */
+};
+
struct rvu {
void __iomem *afreg_base;
void __iomem *pfreg_base;
struct pci_dev *pdev;
struct device *dev;
+ struct rvu_hwinfo *hw;
};
+static inline void rvu_write64(struct rvu *rvu, u64 block, u64 offset, u64 val)
+{
+ writeq(val, rvu->afreg_base + ((block << 28) | offset));
+}
+
+static inline u64 rvu_read64(struct rvu *rvu, u64 block, u64 offset)
+{
+ return readq(rvu->afreg_base + ((block << 28) | offset));
+}
+
+static inline void rvupf_write64(struct rvu *rvu, u64 offset, u64 val)
+{
+ writeq(val, rvu->pfreg_base + offset);
+}
+
+static inline u64 rvupf_read64(struct rvu *rvu, u64 offset)
+{
+ return readq(rvu->pfreg_base + offset);
+}
+
+/* Function Prototypes
+ * RVU
+ */
+
+int rvu_poll_reg(struct rvu *rvu, u64 block, u64 offset, u64 mask, bool zero);
+
#endif /* RVU_H */
new file mode 100644
@@ -0,0 +1,113 @@
+/* SPDX-License-Identifier: GPL-2.0
+ * Marvell OcteonTx2 RVU Admin Function driver
+ *
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef RVU_REG_H
+#define RVU_REG_H
+
+/* Admin function registers */
+#define RVU_AF_MSIXTR_BASE (0x10)
+#define RVU_AF_ECO (0x20)
+#define RVU_AF_BLK_RST (0x30)
+#define RVU_AF_PF_BAR4_ADDR (0x40)
+#define RVU_AF_RAS (0x100)
+#define RVU_AF_RAS_W1S (0x108)
+#define RVU_AF_RAS_ENA_W1S (0x110)
+#define RVU_AF_RAS_ENA_W1C (0x118)
+#define RVU_AF_GEN_INT (0x120)
+#define RVU_AF_GEN_INT_W1S (0x128)
+#define RVU_AF_GEN_INT_ENA_W1S (0x130)
+#define RVU_AF_GEN_INT_ENA_W1C (0x138)
+#define RVU_AF_AFPF_MBOX0 (0x02000)
+#define RVU_AF_AFPF_MBOX1 (0x02008)
+#define RVU_AF_AFPFX_MBOXX(a, b) (0x2000 | (a) << 4 | (b) << 3)
+#define RVU_AF_PFME_STATUS (0x2800)
+#define RVU_AF_PFTRPEND (0x2810)
+#define RVU_AF_PFTRPEND_W1S (0x2820)
+#define RVU_AF_PF_RST (0x2840)
+#define RVU_AF_HWVF_RST (0x2850)
+#define RVU_AF_PFAF_MBOX_INT (0x2880)
+#define RVU_AF_PFAF_MBOX_INT_W1S (0x2888)
+#define RVU_AF_PFAF_MBOX_INT_ENA_W1S (0x2890)
+#define RVU_AF_PFAF_MBOX_INT_ENA_W1C (0x2898)
+#define RVU_AF_PFFLR_INT (0x28a0)
+#define RVU_AF_PFFLR_INT_W1S (0x28a8)
+#define RVU_AF_PFFLR_INT_ENA_W1S (0x28b0)
+#define RVU_AF_PFFLR_INT_ENA_W1C (0x28b8)
+#define RVU_AF_PFME_INT (0x28c0)
+#define RVU_AF_PFME_INT_W1S (0x28c8)
+#define RVU_AF_PFME_INT_ENA_W1S (0x28d0)
+#define RVU_AF_PFME_INT_ENA_W1C (0x28d8)
+
+/* Admin function's privileged PF/VF registers */
+#define RVU_PRIV_CONST (0x8000000)
+#define RVU_PRIV_GEN_CFG (0x8000010)
+#define RVU_PRIV_CLK_CFG (0x8000020)
+#define RVU_PRIV_ACTIVE_PC (0x8000030)
+#define RVU_PRIV_PFX_CFG(a) (0x8000100 | (a) << 16)
+#define RVU_PRIV_PFX_MSIX_CFG(a) (0x8000110 | (a) << 16)
+#define RVU_PRIV_PFX_ID_CFG(a) (0x8000120 | (a) << 16)
+#define RVU_PRIV_PFX_INT_CFG(a) (0x8000200 | (a) << 16)
+#define RVU_PRIV_PFX_NIX_CFG (0x8000300)
+#define RVU_PRIV_PFX_NPA_CFG (0x8000310)
+#define RVU_PRIV_PFX_SSO_CFG (0x8000320)
+#define RVU_PRIV_PFX_SSOW_CFG (0x8000330)
+#define RVU_PRIV_PFX_TIM_CFG (0x8000340)
+#define RVU_PRIV_PFX_CPT_CFG (0x8000350)
+#define RVU_PRIV_BLOCK_TYPEX_REV(a) (0x8000400 | (a) << 3)
+#define RVU_PRIV_HWVFX_INT_CFG(a) (0x8001280 | (a) << 16)
+#define RVU_PRIV_HWVFX_NIX_CFG (0x8001300)
+#define RVU_PRIV_HWVFX_NPA_CFG (0x8001310)
+#define RVU_PRIV_HWVFX_SSO_CFG (0x8001320)
+#define RVU_PRIV_HWVFX_SSOW_CFG (0x8001330)
+#define RVU_PRIV_HWVFX_TIM_CFG (0x8001340)
+#define RVU_PRIV_HWVFX_CPT_CFG (0x8001350)
+
+/* RVU PF registers */
+#define RVU_PF_VFX_PFVF_MBOX0 (0x00000)
+#define RVU_PF_VFX_PFVF_MBOX1 (0x00008)
+#define RVU_PF_VFX_PFVF_MBOXX(a, b) (0x0 | (a) << 12 | (b) << 3)
+#define RVU_PF_VF_BAR4_ADDR (0x10)
+#define RVU_PF_BLOCK_ADDRX_DISC(a) (0x200 | (a) << 3)
+#define RVU_PF_VFME_STATUSX(a) (0x800 | (a) << 3)
+#define RVU_PF_VFTRPENDX(a) (0x820 | (a) << 3)
+#define RVU_PF_VFTRPEND_W1SX(a) (0x840 | (a) << 3)
+#define RVU_PF_VFPF_MBOX_INTX(a) (0x880 | (a) << 3)
+#define RVU_PF_VFPF_MBOX_INT_W1SX(a) (0x8A0 | (a) << 3)
+#define RVU_PF_VFPF_MBOX_INT_ENA_W1SX(a) (0x8C0 | (a) << 3)
+#define RVU_PF_VFPF_MBOX_INT_ENA_W1CX(a) (0x8E0 | (a) << 3)
+#define RVU_PF_VFFLR_INTX(a) (0x900 | (a) << 3)
+#define RVU_PF_VFFLR_INT_W1SX(a) (0x920 | (a) << 3)
+#define RVU_PF_VFFLR_INT_ENA_W1SX(a) (0x940 | (a) << 3)
+#define RVU_PF_VFFLR_INT_ENA_W1CX(a) (0x960 | (a) << 3)
+#define RVU_PF_VFME_INTX(a) (0x980 | (a) << 3)
+#define RVU_PF_VFME_INT_W1SX(a) (0x9A0 | (a) << 3)
+#define RVU_PF_VFME_INT_ENA_W1SX(a) (0x9C0 | (a) << 3)
+#define RVU_PF_VFME_INT_ENA_W1CX(a) (0x9E0 | (a) << 3)
+#define RVU_PF_PFAF_MBOX0 (0xC00)
+#define RVU_PF_PFAF_MBOX1 (0xC08)
+#define RVU_PF_PFAF_MBOXX(a) (0xC00 | (a) << 3)
+#define RVU_PF_INT (0xc20)
+#define RVU_PF_INT_W1S (0xc28)
+#define RVU_PF_INT_ENA_W1S (0xc30)
+#define RVU_PF_INT_ENA_W1C (0xc38)
+#define RVU_PF_MSIX_VECX_ADDR(a) (0x000 | (a) << 4)
+#define RVU_PF_MSIX_VECX_CTL(a) (0x008 | (a) << 4)
+#define RVU_PF_MSIX_PBAX(a) (0xF0000 | (a) << 3)
+
+
+#define NPA_AF_BLK_RST (0x0000)
+#define NIX_AF_BLK_RST (0x00B0)
+#define SSO_AF_BLK_RST (0x10f8)
+#define TIM_AF_BLK_RST (0x10)
+#define CPT_AF_BLK_RST (0x46000)
+#define NDC_AF_BLK_RST (0x002F0)
+#define NPC_AF_BLK_RST (0x00040)
+
+#endif /* RVU_REG_H */
new file mode 100644
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: GPL-2.0
+ * Marvell OcteonTx2 RVU Admin Function driver
+ *
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef RVU_STRUCT_H
+#define RVU_STRUCT_H
+
+/*
+ * RVU Block Address Enumeration
+ */
+enum rvu_block_addr_e {
+ BLKADDR_RVUM = 0x0ULL,
+ BLKADDR_LMT = 0x1ULL,
+ BLKADDR_MSIX = 0x2ULL,
+ BLKADDR_NPA = 0x3ULL,
+ BLKADDR_NIX0 = 0x4ULL,
+ BLKADDR_NIX1 = 0x5ULL,
+ BLKADDR_NPC = 0x6ULL,
+ BLKADDR_SSO = 0x7ULL,
+ BLKADDR_SSOW = 0x8ULL,
+ BLKADDR_TIM = 0x9ULL,
+ BLKADDR_CPT0 = 0xaULL,
+ BLKADDR_CPT1 = 0xbULL,
+ BLKADDR_NDC0 = 0xcULL,
+ BLKADDR_NDC1 = 0xdULL,
+ BLKADDR_NDC2 = 0xeULL,
+ BLK_COUNT = 0xfULL,
+};
+
+#endif /* RVU_STRUCT_H */