@@ -528,6 +528,20 @@
cdns,phy-dll-delay-sdclk-hsmmc = <21>;
};
+ sd: sdhc@5a400000 {
+ compatible = "socionext,uniphier-sd-v3.1.1";
+ status = "disabled";
+ reg = <0x5a400000 0x800>;
+ interrupts = <0 76 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sd>;
+ clocks = <&sd_clk 0>;
+ reset-names = "host";
+ resets = <&sd_rst 0>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ };
+
soc_glue: soc-glue@5f800000 {
compatible = "socionext,uniphier-ld20-soc-glue",
"simple-mfd", "syscon";
@@ -75,6 +75,10 @@
status = "okay";
};
+&sd {
+ status = "okay";
+};
+
ð0 {
status = "okay";
phy-handle = <ðphy0>;
@@ -341,6 +341,24 @@
cdns,phy-dll-delay-sdclk-hsmmc = <21>;
};
+ sd: sdhc@5a400000 {
+ compatible = "socionext,uniphier-sd-v3.1.1";
+ status = "disabled";
+ reg = <0x5a400000 0x800>;
+ interrupts = <0 76 4>;
+ pinctrl-names = "default", "uhs";
+ pinctrl-0 = <&pinctrl_sd>;
+ pinctrl-1 = <&pinctrl_sd_uhs>;
+ clocks = <&sd_clk 0>;
+ reset-names = "host";
+ resets = <&sd_rst 0>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ };
+
soc_glue: soc-glue@5f800000 {
compatible = "socionext,uniphier-pxs3-soc-glue",
"simple-mfd", "syscon";
Add SD controller nodes for LD20 and PXs3. LD20 does not support the UHS mode, while PXs3 supports it. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> --- arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi | 14 ++++++++++++++ arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts | 4 ++++ arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi | 18 ++++++++++++++++++ 3 files changed, 36 insertions(+)