| Message ID | 1547134822-18498-1-git-send-email-lollivier@baylibre.com (mailing list archive) |
|---|---|
| State | Mainlined, archived |
| Commit | f29200c8b1e267b109242677ae7f2146c7682d14 |
| Headers | show |
| Series | [v3] arm64: dts: meson: Fix mmc cd-gpios polarity | expand |
Loys Ollivier <lollivier@baylibre.com> writes: > Commit 89a5e15bcba8 ("gpio/mmc/of: Respect polarity in the device tree") > changed the behavior of "cd-inverted" to follow the device tree bindings > specification. > Lines specifying "cd-inverted" are now "active high". > > Fix the SD card for meson by setting the cd-gpios as "active low" according > to the boards specifications. > > Fixes: 89a5e15bcba8 ("gpio/mmc/of: Respect polarity in the device tree") > Signed-off-by: Loys Ollivier <lollivier@baylibre.com> Thanks for fixing this! Queued as a fix for v5.1-rc, I see that this is being fixed in the driver also, but I think fixing the DTs is necessary also. Kevin
Hi, some nit-picks as well as my Tested-by (in case it's not too late) below. thank you for taking care of this! On Thu, Jan 10, 2019 at 4:40 PM Loys Ollivier <lollivier@baylibre.com> wrote: > > Commit 89a5e15bcba8 ("gpio/mmc/of: Respect polarity in the device tree") > changed the behavior of "cd-inverted" to follow the device tree bindings > specification. > Lines specifying "cd-inverted" are now "active high". this depends on the polarity from the cd-gpios property. above commit caused cd-inverted to be applied twice (effectively making it a no-op). thus "cd-inverted" only means "active high" if cd-gpios also sets GPIO_ACTIVE_HIGH. if the polarity in cd-gpios is GPIO_ACTIVE_LOW together with "cd-inverted" then the GPIO will be treated as active low. > Fix the SD card for meson by setting the cd-gpios as "active low" according > to the boards specifications. not only switching to GPIO_ACTIVE_LOW, also dropping "cd-inverted" > Fixes: 89a5e15bcba8 ("gpio/mmc/of: Respect polarity in the device tree") in my patches for the 32-bit boards I used the commit which added SD card support to the board for the Fixes tag. however, I'm fine with this as well (I just wanted to point out that there's a small difference in our commits). > Signed-off-by: Loys Ollivier <lollivier@baylibre.com> on my Khadas VIM(1), using Kevin's v5.0/fixes branch: Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Regards Martin
Martin Blumenstingl <martin.blumenstingl@googlemail.com> writes: > Hi, > > some nit-picks as well as my Tested-by (in case it's not too late) below. > thank you for taking care of this! > > On Thu, Jan 10, 2019 at 4:40 PM Loys Ollivier <lollivier@baylibre.com> wrote: >> >> Commit 89a5e15bcba8 ("gpio/mmc/of: Respect polarity in the device tree") >> changed the behavior of "cd-inverted" to follow the device tree bindings >> specification. >> Lines specifying "cd-inverted" are now "active high". > this depends on the polarity from the cd-gpios property. above commit > caused cd-inverted to be applied twice (effectively making it a > no-op). thus "cd-inverted" only means "active high" if cd-gpios also > sets GPIO_ACTIVE_HIGH. if the polarity in cd-gpios is GPIO_ACTIVE_LOW > together with "cd-inverted" then the GPIO will be treated as active > low. > >> Fix the SD card for meson by setting the cd-gpios as "active low" according >> to the boards specifications. > not only switching to GPIO_ACTIVE_LOW, also dropping "cd-inverted" > >> Fixes: 89a5e15bcba8 ("gpio/mmc/of: Respect polarity in the device tree") > in my patches for the 32-bit boards I used the commit which added SD > card support to the board for the Fixes tag. however, I'm fine with > this as well (I just wanted to point out that there's a small > difference in our commits). > >> Signed-off-by: Loys Ollivier <lollivier@baylibre.com> > on my Khadas VIM(1), using Kevin's v5.0/fixes branch: > Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> I can add this tested-by tag in my v5.0/fixes branch for now, and can replace it with a follow up if Loys can update the changelog with your suggestions/clarifications. Thanks, Kevin
Hello, On Fri 11 Jan 2019 at 19:55, Kevin Hilman wrote: > Martin Blumenstingl <martin.blumenstingl@googlemail.com> writes: > >> Hi, >> >> some nit-picks as well as my Tested-by (in case it's not too late) below. >> thank you for taking care of this! >> You're welcome ! >> On Thu, Jan 10, 2019 at 4:40 PM Loys Ollivier <lollivier@baylibre.com> >> wrote: >>> >>> Commit 89a5e15bcba8 ("gpio/mmc/of: Respect polarity in the device tree") >>> changed the behavior of "cd-inverted" to follow the device tree bindings >>> specification. >>> Lines specifying "cd-inverted" are now "active high". >> this depends on the polarity from the cd-gpios property. above commit >> caused cd-inverted to be applied twice (effectively making it a >> no-op). thus "cd-inverted" only means "active high" if cd-gpios also >> sets GPIO_ACTIVE_HIGH. if the polarity in cd-gpios is GPIO_ACTIVE_LOW >> together with "cd-inverted" then the GPIO will be treated as active >> low. >> Hum ok so there's more to it than the commit message. I'll come by with something clearer for a v4. Thank you for the clarification. >>> Fix the SD card for meson by setting the cd-gpios as "active low" >>> according >>> to the boards specifications. >> not only switching to GPIO_ACTIVE_LOW, also dropping "cd-inverted" >> Indeed. >>> Fixes: 89a5e15bcba8 ("gpio/mmc/of: Respect polarity in the device tree") >> in my patches for the 32-bit boards I used the commit which added SD >> card support to the board for the Fixes tag. however, I'm fine with >> this as well (I just wanted to point out that there's a small >> difference in our commits). >> OK, I treat fixes tags as: from the introduction (or discovery) of a regression (or bug), the "Fixes" commit will patch the commit that introduced the regression. Hence why I tagged the commit from which the platform was not acting correctly anymore. If that's fine for you it's fine for me as well :) >>> Signed-off-by: Loys Ollivier <lollivier@baylibre.com> >> on my Khadas VIM(1), using Kevin's v5.0/fixes branch: >> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> > > I can add this tested-by tag in my v5.0/fixes branch for now, and can > replace it with a follow up if Loys can update the changelog with your > suggestions/clarifications. > Will do. > Thanks, > > Kevin
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi index e14e0ce7e89f..016641a41694 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi @@ -187,8 +187,7 @@ max-frequency = <100000000>; disable-wp; - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&vddao_3v3>; vqmmc-supply = <&vddio_boot>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts index 8cd50b75171d..ade2ee09ae96 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts @@ -305,8 +305,7 @@ max-frequency = <200000000>; disable-wp; - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&vddio_ao3v3>; vqmmc-supply = <&vddio_tf>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts index 4cf7f6e80c6a..25105ac96d55 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts @@ -238,8 +238,7 @@ max-frequency = <100000000>; disable-wp; - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&vddao_3v3>; vqmmc-supply = <&vddio_card>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts index 2e1cd5e3a246..1cc9dc68ef00 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts @@ -258,8 +258,7 @@ max-frequency = <100000000>; disable-wp; - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&tflash_vdd>; vqmmc-supply = <&tf_io>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi index ce862266b9aa..0be0f2a5d2fe 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi @@ -196,8 +196,7 @@ max-frequency = <100000000>; disable-wp; - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&vddao_3v3>; vqmmc-supply = <&vddio_card>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi index 93a4acf2c46c..ad4d50bd9d77 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi @@ -154,8 +154,7 @@ max-frequency = <100000000>; disable-wp; - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&vcc_3v3>; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi index ec09bb5792b7..2d2db783c44c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi @@ -211,8 +211,7 @@ max-frequency = <100000000>; disable-wp; - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&vddao_3v3>; vqmmc-supply = <&vcc_3v3>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts index f1c410e2da2b..796baea7a0bf 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts @@ -131,8 +131,7 @@ max-frequency = <100000000>; disable-wp; - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&vddao_3v3>; vqmmc-supply = <&vddio_card>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts index db293440e4ca..255cede7b447 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts @@ -238,8 +238,7 @@ max-frequency = <100000000>; disable-wp; - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&vcc_3v3>; vqmmc-supply = <&vcc_card>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts index 6739697be1de..9cbdb85fb591 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts @@ -183,8 +183,7 @@ max-frequency = <100000000>; disable-wp; - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&vddao_3v3>; vqmmc-supply = <&vddio_card>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi index a1b31013ab6e..bc811a2faf42 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi @@ -137,8 +137,7 @@ max-frequency = <100000000>; disable-wp; - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&vddao_3v3>; vqmmc-supply = <&vddio_boot>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts index 3c3a667a8df8..3f086ed7de05 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts @@ -356,8 +356,7 @@ max-frequency = <100000000>; disable-wp; - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&vddao_3v3>; vqmmc-supply = <&vddio_boot>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts index f7a1cffab4a8..8acfd40090d2 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts @@ -147,8 +147,7 @@ max-frequency = <100000000>; disable-wp; - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&vddao_3v3>; vqmmc-supply = <&vddio_boot>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts index 7212dc4531e4..7fa20a8ede17 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts @@ -170,8 +170,7 @@ max-frequency = <100000000>; disable-wp; - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&vddao_3v3>; vqmmc-supply = <&vddio_boot>;
Commit 89a5e15bcba8 ("gpio/mmc/of: Respect polarity in the device tree") changed the behavior of "cd-inverted" to follow the device tree bindings specification. Lines specifying "cd-inverted" are now "active high". Fix the SD card for meson by setting the cd-gpios as "active low" according to the boards specifications. Fixes: 89a5e15bcba8 ("gpio/mmc/of: Respect polarity in the device tree") Signed-off-by: Loys Ollivier <lollivier@baylibre.com> --- v3: fix typos in the commit message v2: fix more occurences, also in other meson boards. arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi | 3 +-- arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts | 3 +-- arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts | 3 +-- arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 3 +-- arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi | 3 +-- arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 3 +-- arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi | 3 +-- arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts | 3 +-- arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts | 3 +-- arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts | 3 +-- arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi | 3 +-- arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts | 3 +-- arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts | 3 +-- arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts | 3 +-- 14 files changed, 14 insertions(+), 28 deletions(-)