new file mode 100644
@@ -0,0 +1,44 @@
+Mediatek ISP Pass 1 Shared Memory binding
+
+This binding describes the shared memory, which serves the purpose of
+describing the shared memory region used to exchange data between Pass 1
+unit of Image Signal Processor (ISP) and the co-processor in Mediatek
+SoCs.
+
+The co-processor doesn't have the iommu so we need to use the physical
+address to access the shared buffer in the firmware.
+
+The Pass 1 unit of ISP can access memory through the iommu so it
+uses the dma address to access the memory region.
+(See iommu/mediatek,iommu.txt for the detailed description of Mediatek IOMMU)
+
+
+Required properties:
+
+- compatible: must be "mediatek,reserve-memory-cam_smem"
+
+- reg: required for static allocation (see reserved-memory.txt for
+ the detailed usage)
+
+- alloc-range: required for dynamic allocation. The range must
+ between 0x00000400 and 0x100000000 due to the co-processer's
+ addressing limitation
+
+- size: required for dynamic allocation. The unit is bytes.
+
+
+Example:
+
+The following example shows the ISP Pass1 shared memory setup for MT8183.
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ reserve-memory-cam_smem {
+ compatible = "mediatek,reserve-memory-cam_smem";
+ size = <0 0x1400000>;
+ alignment = <0 0x1000>;
+ alloc-ranges = <0 0x40000000 0 0x50000000>;
+ };
+ };
This patch adds the binding for describing the reserved shared memory used to exchange configuration and tuning data between the co-processor and Pass 1 (P1) unit of the camera ISP system on Mediatek SoCs. Signed-off-by: Jungo Lin <jungo.lin@mediatek.com> --- .../mediatek,reserve-memory-cam_smem.txt | 44 ++++++++++++++++++++++ 1 file changed, 44 insertions(+) create mode 100644 Documentation/devicetree/bindings/reserved-memory/mediatek,reserve-memory-cam_smem.txt