Message ID | 1556265512-9130-8-git-send-email-yibin.gong@nxp.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | add ecspi ERR009165 for i.mx6/7 soc family | expand |
Am Freitag, den 26.04.2019, 08:05 +0000 schrieb Robin Gong: > ERR009165 fix on i.mx6ul and next chip, such as i.mx6ull/i.mx8mq/i.mx8mm. > Remove workaround on those chips. Add new i.mx6ul type for that. > > Signed-off-by: Robin Gong <yibin.gong@nxp.com> > --- > drivers/spi/spi-imx.c | 39 +++++++++++++++++++++++++++++++++++---- > 1 file changed, 35 insertions(+), 4 deletions(-) > > diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c > index eb56eac..2e5e978 100644 > --- a/drivers/spi/spi-imx.c > +++ b/drivers/spi/spi-imx.c > @@ -57,6 +57,7 @@ enum spi_imx_devtype { > IMX35_CSPI, /* CSPI on all i.mx except above */ > IMX51_ECSPI, /* ECSPI on i.mx51 */ > IMX53_ECSPI, /* ECSPI on i.mx53 and later */ > + IMX6UL_ECSPI, /* ERR009165 fix from i.mx6ul */ > }; > > struct spi_imx_data; > @@ -128,7 +129,8 @@ static inline int is_imx35_cspi(struct spi_imx_data *d) > > static inline int is_imx51_ecspi(struct spi_imx_data *d) > { > - return d->devtype_data->devtype == IMX51_ECSPI; > + return d->devtype_data->devtype == IMX51_ECSPI || > + d->devtype_data->devtype == IMX6UL_ECSPI; > } > > static inline int is_imx53_ecspi(struct spi_imx_data *d) > @@ -585,9 +587,16 @@ static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx, > ctrl |= mx51_ecspi_clkdiv(spi_imx, t->speed_hz, &clk); > spi_imx->spi_bus_clk = clk; > > - /* ERR009165: work in XHC mode as PIO */ > - if (spi_imx->usedma) > - ctrl &= ~MX51_ECSPI_CTRL_SMC; > + /* > + * ERR009165: work in XHC mode instead of SMC as PIO on the chips > + * before i.mx6ul. > + */ > + if (spi_imx->usedma) { > + if (spi_imx->devtype_data->devtype == IMX6UL_ECSPI) >=, otherwise the workaround might be applied to later generations of the core if more are added later. Regards, Lucas
On 2019-04-26 at 11:09 +0200, Lucas Stach wrote: > > > static inline int is_imx53_ecspi(struct spi_imx_data *d) > > @@ -585,9 +587,16 @@ static int mx51_ecspi_prepare_transfer(struct > > spi_imx_data *spi_imx, > > ctrl |= mx51_ecspi_clkdiv(spi_imx, t->speed_hz, &clk); > > spi_imx->spi_bus_clk = clk; > > > > - /* ERR009165: work in XHC mode as PIO */ > > - if (spi_imx->usedma) > > - ctrl &= ~MX51_ECSPI_CTRL_SMC; > > + /* > > + * ERR009165: work in XHC mode instead of SMC as PIO on the > > chips > > + * before i.mx6ul. > > + */ > > + if (spi_imx->usedma) { > > + if (spi_imx->devtype_data->devtype == IMX6UL_ECSPI) > > > > =, otherwise the workaround might be applied to later generations > > of > the core if more are added later. > > Regards, > Lucas Understood your point, but for now choose different compatible name could apply this workaround or not. I prefer to leave it for next ecspi IP upgrade if it really come in the future, otherwise that '>=' bring a little bit confuse if there is no update for ecspi IP...
diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index eb56eac..2e5e978 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -57,6 +57,7 @@ enum spi_imx_devtype { IMX35_CSPI, /* CSPI on all i.mx except above */ IMX51_ECSPI, /* ECSPI on i.mx51 */ IMX53_ECSPI, /* ECSPI on i.mx53 and later */ + IMX6UL_ECSPI, /* ERR009165 fix from i.mx6ul */ }; struct spi_imx_data; @@ -128,7 +129,8 @@ static inline int is_imx35_cspi(struct spi_imx_data *d) static inline int is_imx51_ecspi(struct spi_imx_data *d) { - return d->devtype_data->devtype == IMX51_ECSPI; + return d->devtype_data->devtype == IMX51_ECSPI || + d->devtype_data->devtype == IMX6UL_ECSPI; } static inline int is_imx53_ecspi(struct spi_imx_data *d) @@ -585,9 +587,16 @@ static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx, ctrl |= mx51_ecspi_clkdiv(spi_imx, t->speed_hz, &clk); spi_imx->spi_bus_clk = clk; - /* ERR009165: work in XHC mode as PIO */ - if (spi_imx->usedma) - ctrl &= ~MX51_ECSPI_CTRL_SMC; + /* + * ERR009165: work in XHC mode instead of SMC as PIO on the chips + * before i.mx6ul. + */ + if (spi_imx->usedma) { + if (spi_imx->devtype_data->devtype == IMX6UL_ECSPI) + ctrl |= MX51_ECSPI_CTRL_SMC; + else + ctrl &= ~MX51_ECSPI_CTRL_SMC; + } writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL); @@ -615,6 +624,8 @@ static void mx51_setup_wml(struct spi_imx_data *spi_imx) { u32 tx_wml = 0; + if (spi_imx->devtype_data->devtype == IMX6UL_ECSPI) + tx_wml = spi_imx->wml; /* * Configure the DMA register: setup the watermark * and enable DMA request. @@ -1012,6 +1023,22 @@ static struct spi_imx_devtype_data imx53_ecspi_devtype_data = { .devtype = IMX53_ECSPI, }; +static struct spi_imx_devtype_data imx6ul_ecspi_devtype_data = { + .intctrl = mx51_ecspi_intctrl, + .prepare_message = mx51_ecspi_prepare_message, + .prepare_transfer = mx51_ecspi_prepare_transfer, + .trigger = mx51_ecspi_trigger, + .rx_available = mx51_ecspi_rx_available, + .reset = mx51_ecspi_reset, + .setup_wml = mx51_setup_wml, + .fifo_size = 64, + .has_dmamode = true, + .dynamic_burst = true, + .has_slavemode = true, + .disable = mx51_ecspi_disable, + .devtype = IMX6UL_ECSPI, +}; + static const struct platform_device_id spi_imx_devtype[] = { { .name = "imx1-cspi", @@ -1035,6 +1062,9 @@ static const struct platform_device_id spi_imx_devtype[] = { .name = "imx53-ecspi", .driver_data = (kernel_ulong_t) &imx53_ecspi_devtype_data, }, { + .name = "imx6ul-ecspi", + .driver_data = (kernel_ulong_t) &imx6ul_ecspi_devtype_data, + }, { /* sentinel */ } }; @@ -1047,6 +1077,7 @@ static const struct of_device_id spi_imx_dt_ids[] = { { .compatible = "fsl,imx35-cspi", .data = &imx35_cspi_devtype_data, }, { .compatible = "fsl,imx51-ecspi", .data = &imx51_ecspi_devtype_data, }, { .compatible = "fsl,imx53-ecspi", .data = &imx53_ecspi_devtype_data, }, + { .compatible = "fsl,imx6ul-ecspi", .data = &imx6ul_ecspi_devtype_data, }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, spi_imx_dt_ids);
ERR009165 fix on i.mx6ul and next chip, such as i.mx6ull/i.mx8mq/i.mx8mm. Remove workaround on those chips. Add new i.mx6ul type for that. Signed-off-by: Robin Gong <yibin.gong@nxp.com> --- drivers/spi/spi-imx.c | 39 +++++++++++++++++++++++++++++++++++---- 1 file changed, 35 insertions(+), 4 deletions(-)